upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/genesi/mx51_efikamx/efikamx-usb.c

228 lines
5.6 KiB

/*
* Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
*
* (C) Copyright 2009 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <usb.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/iomux-mx51.h>
#include <asm/gpio.h>
#include <usb/ehci-fsl.h>
#include <usb/ulpi.h>
#include <errno.h>
#include "../../../drivers/usb/host/ehci.h"
/*
* Configure the USB H1 and USB H2 IOMUX
*/
void setup_iomux_usb(void)
{
static const iomux_v3_cfg_t usb_h1_pads[] = {
MX51_PAD_USBH1_CLK__USBH1_CLK,
MX51_PAD_USBH1_DIR__USBH1_DIR,
MX51_PAD_USBH1_STP__USBH1_STP,
MX51_PAD_USBH1_NXT__USBH1_NXT,
MX51_PAD_USBH1_DATA0__USBH1_DATA0,
MX51_PAD_USBH1_DATA1__USBH1_DATA1,
MX51_PAD_USBH1_DATA2__USBH1_DATA2,
MX51_PAD_USBH1_DATA3__USBH1_DATA3,
MX51_PAD_USBH1_DATA4__USBH1_DATA4,
MX51_PAD_USBH1_DATA5__USBH1_DATA5,
MX51_PAD_USBH1_DATA6__USBH1_DATA6,
MX51_PAD_USBH1_DATA7__USBH1_DATA7,
};
static const iomux_v3_cfg_t usb_pads[] = {
MX51_PAD_EIM_D27__GPIO2_9, /* USB PHY reset */
MX51_PAD_GPIO1_5__GPIO1_5, /* USB HUB reset */
NEW_PAD_CTRL(MX51_PAD_EIM_A22__GPIO2_16, 0), /* WIFI /EN */
NEW_PAD_CTRL(MX51_PAD_EIM_A16__GPIO2_10, 0), /* WIFI RESET */
NEW_PAD_CTRL(MX51_PAD_EIM_A17__GPIO2_11, 0), /* BT /EN */
};
imx_iomux_v3_setup_multiple_pads(usb_h1_pads, ARRAY_SIZE(usb_h1_pads));
if (machine_is_efikasb()) {
static const iomux_v3_cfg_t usb_h2_pads[] = {
MX51_PAD_EIM_A24__USBH2_CLK,
MX51_PAD_EIM_A25__USBH2_DIR,
MX51_PAD_EIM_A26__USBH2_STP,
MX51_PAD_EIM_A27__USBH2_NXT,
MX51_PAD_EIM_D16__USBH2_DATA0,
MX51_PAD_EIM_D17__USBH2_DATA1,
MX51_PAD_EIM_D18__USBH2_DATA2,
MX51_PAD_EIM_D19__USBH2_DATA3,
MX51_PAD_EIM_D20__USBH2_DATA4,
MX51_PAD_EIM_D21__USBH2_DATA5,
MX51_PAD_EIM_D22__USBH2_DATA6,
MX51_PAD_EIM_D23__USBH2_DATA7,
};
imx_iomux_v3_setup_multiple_pads(usb_h2_pads,
ARRAY_SIZE(usb_h2_pads));
}
imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads));
}
/*
* Enable devices connected to USB BUSes
*/
static void efika_usb_enable_devices(void)
{
/* Enable Bluetooth */
gpio_direction_output(IMX_GPIO_NR(2, 11), 0);
udelay(10000);
gpio_set_value(IMX_GPIO_NR(2, 11), 1);
/* Enable WiFi */
gpio_direction_output(IMX_GPIO_NR(2, 16), 1);
udelay(10000);
/* Reset the WiFi chip */
gpio_direction_output(IMX_GPIO_NR(2, 10), 0);
udelay(10000);
gpio_set_value(IMX_GPIO_NR(2, 10), 1);
}
/*
* Reset USB HUB (or HUBs on EfikaSB)
*/
static void efika_usb_hub_reset(void)
{
/* HUB reset */
gpio_direction_output(IMX_GPIO_NR(1, 5), 1);
udelay(1000);
gpio_set_value(IMX_GPIO_NR(1, 5), 0);
udelay(1000);
gpio_set_value(IMX_GPIO_NR(1, 5), 1);
}
/*
* Reset USB PHY (or PHYs on EfikaSB)
*/
static void efika_usb_phy_reset(void)
{
/* SMSC 3317 PHY reset */
gpio_direction_output(IMX_GPIO_NR(2, 9), 0);
udelay(1000);
gpio_set_value(IMX_GPIO_NR(2, 9), 1);
}
static void efika_ehci_init(struct usb_ehci *ehci, uint32_t stp_gpio,
iomux_v3_cfg_t stp_pad_gpio,
iomux_v3_cfg_t stp_pad_usb)
{
int ret;
struct ulpi_regs *ulpi = (struct ulpi_regs *)0;
struct ulpi_viewport ulpi_vp;
imx_iomux_v3_setup_pad(stp_pad_gpio);
gpio_direction_output(stp_gpio, 0);
udelay(1000);
gpio_set_value(stp_gpio, 1);
udelay(1000);
imx_iomux_v3_setup_pad(stp_pad_usb);
udelay(10000);
ulpi_vp.viewport_addr = (u32)&ehci->ulpi_viewpoint;
ulpi_vp.port_num = 0;
ret = ulpi_init(&ulpi_vp);
if (ret) {
printf("Efika USB ULPI initialization failed\n");
return;
}
/* ULPI set flags */
ulpi_write(&ulpi_vp, &ulpi->otg_ctrl,
ULPI_OTG_DP_PULLDOWN | ULPI_OTG_DM_PULLDOWN |
ULPI_OTG_EXTVBUSIND);
ulpi_write(&ulpi_vp, &ulpi->function_ctrl,
ULPI_FC_FULL_SPEED | ULPI_FC_OPMODE_NORMAL |
ULPI_FC_SUSPENDM);
ulpi_write(&ulpi_vp, &ulpi->iface_ctrl, 0);
/* Set VBus */
ulpi_write(&ulpi_vp, &ulpi->otg_ctrl_set,
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
/*
* Set VBusChrg
*
* NOTE: This violates USB specification, but otherwise, USB on Efika
* doesn't work.
*/
ulpi_write(&ulpi_vp, &ulpi->otg_ctrl_set, ULPI_OTG_CHRGVBUS);
}
int board_ehci_hcd_init(int port)
{
/* Init iMX51 EHCI */
efika_usb_phy_reset();
efika_usb_hub_reset();
efika_usb_enable_devices();
return 0;
}
void ehci_powerup_fixup(uint32_t *status_reg, uint32_t *reg)
{
uint32_t port = OTG_BASE_ADDR + (0x200 * CONFIG_MXC_USB_PORT);
struct usb_ehci *ehci = (struct usb_ehci *)port;
struct ulpi_regs *ulpi = (struct ulpi_regs *)0;
struct ulpi_viewport ulpi_vp;
ulpi_vp.viewport_addr = (u32)&ehci->ulpi_viewpoint;
ulpi_vp.port_num = 0;
ulpi_write(&ulpi_vp, &ulpi->otg_ctrl_set, ULPI_OTG_CHRGVBUS);
mdelay(50);
/* terminate the reset */
*reg = ehci_readl(status_reg);
*reg |= EHCI_PS_PE;
}
void board_ehci_hcd_postinit(struct usb_ehci *ehci, int port)
{
uint32_t tmp;
if (port == 0) {
/* Adjust UTMI PHY frequency to 24MHz */
tmp = readl(OTG_BASE_ADDR + 0x80c);
tmp = (tmp & ~0x3) | 0x01;
writel(tmp, OTG_BASE_ADDR + 0x80c);
} else if (port == 1) {
efika_ehci_init(ehci, IMX_GPIO_NR(1, 27),
MX51_PAD_USBH1_STP__GPIO1_27,
MX51_PAD_USBH1_STP__USBH1_STP);
} else if ((port == 2) && machine_is_efikasb()) {
efika_ehci_init(ehci, IMX_GPIO_NR(2, 20),
MX51_PAD_EIM_A26__GPIO2_20,
MX51_PAD_EIM_A26__USBH2_STP);
}
if (port)
mdelay(10);
}
/*
* Ethernet on the Smarttop is on the USB bus. Rather than give an error about
* "CPU Net Initialization Failed", just pass this test since no other settings
* are required. Smartbook doesn't have built-in Ethernet but we will let it
* pass anyway considering someone may have plugged in a USB stick and all
* they need to do is run "usb start".
*/
int board_eth_init(bd_t *bis)
{
return 0;
}