upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/drivers/net/lan91c96.c

967 lines
24 KiB

/*------------------------------------------------------------------------
* lan91c96.c
* This is a driver for SMSC's LAN91C96 single-chip Ethernet device, based
* on the SMC91111 driver from U-boot.
*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Rolf Offermanns <rof@sysgo.de>
*
* Copyright (C) 2001 Standard Microsystems Corporation (SMSC)
* Developed by Simple Network Magic Corporation (SNMC)
* Copyright (C) 1996 by Erik Stahlman (ES)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* Information contained in this file was obtained from the LAN91C96
* manual from SMC. To get a copy, if you really want one, you can find
* information under www.smsc.com.
*
*
* "Features" of the SMC chip:
* 6144 byte packet memory. ( for the 91C96 )
* EEPROM for configuration
* AUI/TP selection ( mine has 10Base2/10BaseT select )
*
* Arguments:
* io = for the base address
* irq = for the IRQ
*
* author:
* Erik Stahlman ( erik@vt.edu )
* Daris A Nevil ( dnevil@snmc.com )
*
*
* Hardware multicast code from Peter Cammaert ( pc@denkart.be )
*
* Sources:
* o SMSC LAN91C96 databook (www.smsc.com)
* o smc91111.c (u-boot driver)
* o smc9194.c (linux kernel driver)
* o lan91c96.c (Intel Diagnostic Manager driver)
*
* History:
* 04/30/03 Mathijs Haarman Modified smc91111.c (u-boot version)
* for lan91c96
*---------------------------------------------------------------------------
*/
#include <common.h>
#include <command.h>
#include "lan91c96.h"
#include <net.h>
#ifdef CONFIG_DRIVER_LAN91C96
#if defined(CONFIG_CMD_NET)
/*------------------------------------------------------------------------
*
* Configuration options, for the experienced user to change.
*
-------------------------------------------------------------------------*/
/* Use power-down feature of the chip */
#define POWER_DOWN 0
/*
* Wait time for memory to be free. This probably shouldn't be
* tuned that much, as waiting for this means nothing else happens
* in the system
*/
#define MEMORY_WAIT_TIME 16
#define SMC_DEBUG 0
#if (SMC_DEBUG > 2 )
#define PRINTK3(args...) printf(args)
#else
#define PRINTK3(args...)
#endif
#if SMC_DEBUG > 1
#define PRINTK2(args...) printf(args)
#else
#define PRINTK2(args...)
#endif
#ifdef SMC_DEBUG
#define PRINTK(args...) printf(args)
#else
#define PRINTK(args...)
#endif
/*------------------------------------------------------------------------
*
* The internal workings of the driver. If you are changing anything
* here with the SMC stuff, you should have the datasheet and know
* what you are doing.
*
*------------------------------------------------------------------------
*/
#define CARDNAME "LAN91C96"
#define SMC_BASE_ADDRESS CONFIG_LAN91C96_BASE
#define SMC_DEV_NAME "LAN91C96"
#define SMC_ALLOC_MAX_TRY 5
#define SMC_TX_TIMEOUT 30
#define ETH_ZLEN 60
#ifdef CONFIG_LAN91C96_USE_32_BIT
#define USE_32_BIT 1
#else
#undef USE_32_BIT
#endif
/*-----------------------------------------------------------------
*
* The driver can be entered at any of the following entry points.
*
*-----------------------------------------------------------------
*/
extern int eth_init (bd_t * bd);
extern void eth_halt (void);
extern int eth_rx (void);
extern int eth_send (volatile void *packet, int length);
#if 0
static int smc_hw_init (void);
#endif
/*
* This is called by register_netdev(). It is responsible for
* checking the portlist for the SMC9000 series chipset. If it finds
* one, then it will initialize the device, find the hardware information,
* and sets up the appropriate device parameters.
* NOTE: Interrupts are *OFF* when this procedure is called.
*
* NB:This shouldn't be static since it is referred to externally.
*/
int smc_init (void);
/*
* This is called by unregister_netdev(). It is responsible for
* cleaning up before the driver is finally unregistered and discarded.
*/
void smc_destructor (void);
/*
* The kernel calls this function when someone wants to use the device,
* typically 'ifconfig ethX up'.
*/
static int smc_open (bd_t *bd);
/*
* This is called by the kernel in response to 'ifconfig ethX down'. It
* is responsible for cleaning up everything that the open routine
* does, and maybe putting the card into a powerdown state.
*/
static int smc_close (void);
/*
* This is a separate procedure to handle the receipt of a packet, to
* leave the interrupt code looking slightly cleaner
*/
static int smc_rcv (void);
/* See if a MAC address is defined in the current environment. If so use it. If not
. print a warning and set the environment and other globals with the default.
. If an EEPROM is present it really should be consulted.
*/
int smc_get_ethaddr(bd_t *bd);
int get_rom_mac(unsigned char *v_rom_mac);
/* ------------------------------------------------------------
* Internal routines
* ------------------------------------------------------------
*/
static unsigned char smc_mac_addr[] = { 0xc0, 0x00, 0x00, 0x1b, 0x62, 0x9c };
/*
* This function must be called before smc_open() if you want to override
* the default mac address.
*/
void smc_set_mac_addr (const unsigned char *addr)
{
int i;
for (i = 0; i < sizeof (smc_mac_addr); i++) {
smc_mac_addr[i] = addr[i];
}
}
/*
* smc_get_macaddr is no longer used. If you want to override the default
* mac address, call smc_get_mac_addr as a part of the board initialisation.
*/
#if 0
void smc_get_macaddr (byte * addr)
{
/* MAC ADDRESS AT FLASHBLOCK 1 / OFFSET 0x10 */
unsigned char *dnp1110_mac = (unsigned char *) (0xE8000000 + 0x20010);
int i;
for (i = 0; i < 6; i++) {
addr[0] = *(dnp1110_mac + 0);
addr[1] = *(dnp1110_mac + 1);
addr[2] = *(dnp1110_mac + 2);
addr[3] = *(dnp1110_mac + 3);
addr[4] = *(dnp1110_mac + 4);
addr[5] = *(dnp1110_mac + 5);
}
}
#endif /* 0 */
/***********************************************
* Show available memory *
***********************************************/
void dump_memory_info (void)
{
word mem_info;
word old_bank;
old_bank = SMC_inw (LAN91C96_BANK_SELECT) & 0xF;
SMC_SELECT_BANK (0);
mem_info = SMC_inw (LAN91C96_MIR);
PRINTK2 ("Memory: %4d available\n", (mem_info >> 8) * 2048);
SMC_SELECT_BANK (old_bank);
}
/*
* A rather simple routine to print out a packet for debugging purposes.
*/
#if SMC_DEBUG > 2
static void print_packet (byte *, int);
#endif
/* #define tx_done(dev) 1 */
/* this does a soft reset on the device */
static void smc_reset (void);
/* Enable Interrupts, Receive, and Transmit */
static void smc_enable (void);
/* this puts the device in an inactive state */
static void smc_shutdown (void);
static int poll4int (byte mask, int timeout)
{
int tmo = get_timer (0) + timeout * CFG_HZ;
int is_timeout = 0;
word old_bank = SMC_inw (LAN91C96_BANK_SELECT);
PRINTK2 ("Polling...\n");
SMC_SELECT_BANK (2);
while ((SMC_inw (LAN91C96_INT_STATS) & mask) == 0) {
if (get_timer (0) >= tmo) {
is_timeout = 1;
break;
}
}
/* restore old bank selection */
SMC_SELECT_BANK (old_bank);
if (is_timeout)
return 1;
else
return 0;
}
/*
* Function: smc_reset( void )
* Purpose:
* This sets the SMC91111 chip to its normal state, hopefully from whatever
* mess that any other DOS driver has put it in.
*
* Maybe I should reset more registers to defaults in here? SOFTRST should
* do that for me.
*
* Method:
* 1. send a SOFT RESET
* 2. wait for it to finish
* 3. enable autorelease mode
* 4. reset the memory management unit
* 5. clear all interrupts
*
*/
static void smc_reset (void)
{
PRINTK2 ("%s:smc_reset\n", SMC_DEV_NAME);
/* This resets the registers mostly to defaults, but doesn't
affect EEPROM. That seems unnecessary */
SMC_SELECT_BANK (0);
SMC_outw (LAN91C96_RCR_SOFT_RST, LAN91C96_RCR);
udelay (10);
/* Disable transmit and receive functionality */
SMC_outw (0, LAN91C96_RCR);
SMC_outw (0, LAN91C96_TCR);
/* set the control register */
SMC_SELECT_BANK (1);
SMC_outw (SMC_inw (LAN91C96_CONTROL) | LAN91C96_CTR_BIT_8,
LAN91C96_CONTROL);
/* Disable all interrupts */
SMC_outb (0, LAN91C96_INT_MASK);
}
/*
* Function: smc_enable
* Purpose: let the chip talk to the outside work
* Method:
* 1. Initialize the Memory Configuration Register
* 2. Enable the transmitter
* 3. Enable the receiver
*/
static void smc_enable ()
{
PRINTK2 ("%s:smc_enable\n", SMC_DEV_NAME);
SMC_SELECT_BANK (0);
/* Initialize the Memory Configuration Register. See page
49 of the LAN91C96 data sheet for details. */
SMC_outw (LAN91C96_MCR_TRANSMIT_PAGES, LAN91C96_MCR);
/* Initialize the Transmit Control Register */
SMC_outw (LAN91C96_TCR_TXENA, LAN91C96_TCR);
/* Initialize the Receive Control Register
* FIXME:
* The promiscuous bit set because I could not receive ARP reply
* packets from the server when I send a ARP request. It only works
* when I set the promiscuous bit
*/
SMC_outw (LAN91C96_RCR_RXEN | LAN91C96_RCR_PRMS, LAN91C96_RCR);
}
/*
* Function: smc_shutdown
* Purpose: closes down the SMC91xxx chip.
* Method:
* 1. zero the interrupt mask
* 2. clear the enable receive flag
* 3. clear the enable xmit flags
*
* TODO:
* (1) maybe utilize power down mode.
* Why not yet? Because while the chip will go into power down mode,
* the manual says that it will wake up in response to any I/O requests
* in the register space. Empirical results do not show this working.
*/
static void smc_shutdown ()
{
PRINTK2 (CARDNAME ":smc_shutdown\n");
/* no more interrupts for me */
SMC_SELECT_BANK (2);
SMC_outb (0, LAN91C96_INT_MASK);
/* and tell the card to stay away from that nasty outside world */
SMC_SELECT_BANK (0);
SMC_outb (0, LAN91C96_RCR);
SMC_outb (0, LAN91C96_TCR);
}
/*
* Function: smc_hardware_send_packet(struct net_device * )
* Purpose:
* This sends the actual packet to the SMC9xxx chip.
*
* Algorithm:
* First, see if a saved_skb is available.
* ( this should NOT be called if there is no 'saved_skb'
* Now, find the packet number that the chip allocated
* Point the data pointers at it in memory
* Set the length word in the chip's memory
* Dump the packet to chip memory
* Check if a last byte is needed ( odd length packet )
* if so, set the control flag right
* Tell the card to send it
* Enable the transmit interrupt, so I know if it failed
* Free the kernel data if I actually sent it.
*/
static int smc_send_packet (volatile void *packet, int packet_length)
{
byte packet_no;
unsigned long ioaddr;
byte *buf;
int length;
int numPages;
int try = 0;
int time_out;
byte status;
PRINTK3 ("%s:smc_hardware_send_packet\n", SMC_DEV_NAME);
length = ETH_ZLEN < packet_length ? packet_length : ETH_ZLEN;
/* allocate memory
** The MMU wants the number of pages to be the number of 256 bytes
** 'pages', minus 1 ( since a packet can't ever have 0 pages :) )
**
** The 91C111 ignores the size bits, but the code is left intact
** for backwards and future compatibility.
**
** Pkt size for allocating is data length +6 (for additional status
** words, length and ctl!)
**
** If odd size then last byte is included in this header.
*/
numPages = ((length & 0xfffe) + 6);
numPages >>= 8; /* Divide by 256 */
if (numPages > 7) {
printf ("%s: Far too big packet error. \n", SMC_DEV_NAME);
return 0;
}
/* now, try to allocate the memory */
SMC_SELECT_BANK (2);
SMC_outw (LAN91C96_MMUCR_ALLOC_TX | numPages, LAN91C96_MMU);
again:
try++;
time_out = MEMORY_WAIT_TIME;
do {
status = SMC_inb (LAN91C96_INT_STATS);
if (status & LAN91C96_IST_ALLOC_INT) {
SMC_outb (LAN91C96_IST_ALLOC_INT, LAN91C96_INT_STATS);
break;
}
} while (--time_out);
if (!time_out) {
PRINTK2 ("%s: memory allocation, try %d failed ...\n",
SMC_DEV_NAME, try);
if (try < SMC_ALLOC_MAX_TRY)
goto again;
else
return 0;
}
PRINTK2 ("%s: memory allocation, try %d succeeded ...\n",
SMC_DEV_NAME, try);
/* I can send the packet now.. */
ioaddr = SMC_BASE_ADDRESS;
buf = (byte *) packet;
/* If I get here, I _know_ there is a packet slot waiting for me */
packet_no = SMC_inb (LAN91C96_ARR);
if (packet_no & LAN91C96_ARR_FAILED) {
/* or isn't there? BAD CHIP! */
printf ("%s: Memory allocation failed. \n", SMC_DEV_NAME);
return 0;
}
/* we have a packet address, so tell the card to use it */
SMC_outb (packet_no, LAN91C96_PNR);
/* point to the beginning of the packet */
SMC_outw (LAN91C96_PTR_AUTO_INCR, LAN91C96_POINTER);
PRINTK3 ("%s: Trying to xmit packet of length %x\n",
SMC_DEV_NAME, length);
#if SMC_DEBUG > 2
printf ("Transmitting Packet\n");
print_packet (buf, length);
#endif
/* send the packet length ( +6 for status, length and ctl byte )
and the status word ( set to zeros ) */
#ifdef USE_32_BIT
SMC_outl ((length + 6) << 16, LAN91C96_DATA_HIGH);
#else
SMC_outw (0, LAN91C96_DATA_HIGH);
/* send the packet length ( +6 for status words, length, and ctl */
SMC_outw ((length + 6), LAN91C96_DATA_HIGH);
#endif /* USE_32_BIT */
/* send the actual data
* I _think_ it's faster to send the longs first, and then
* mop up by sending the last word. It depends heavily
* on alignment, at least on the 486. Maybe it would be
* a good idea to check which is optimal? But that could take
* almost as much time as is saved?
*/
#ifdef USE_32_BIT
SMC_outsl (LAN91C96_DATA_HIGH, buf, length >> 2);
if (length & 0x2)
SMC_outw (*((word *) (buf + (length & 0xFFFFFFFC))),
LAN91C96_DATA_HIGH);
#else
SMC_outsw (LAN91C96_DATA_HIGH, buf, (length) >> 1);
#endif /* USE_32_BIT */
/* Send the last byte, if there is one. */
if ((length & 1) == 0) {
SMC_outw (0, LAN91C96_DATA_HIGH);
} else {
SMC_outw (buf[length - 1] | 0x2000, LAN91C96_DATA_HIGH);
}
/* and let the chipset deal with it */
SMC_outw (LAN91C96_MMUCR_ENQUEUE, LAN91C96_MMU);
/* poll for TX INT */
if (poll4int (LAN91C96_MSK_TX_INT, SMC_TX_TIMEOUT)) {
/* sending failed */
PRINTK2 ("%s: TX timeout, sending failed...\n", SMC_DEV_NAME);
/* release packet */
SMC_outw (LAN91C96_MMUCR_RELEASE_TX, LAN91C96_MMU);
/* wait for MMU getting ready (low) */
while (SMC_inw (LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY) {
udelay (10);
}
PRINTK2 ("MMU ready\n");
return 0;
} else {
/* ack. int */
SMC_outw (LAN91C96_IST_TX_INT, LAN91C96_INT_STATS);
PRINTK2 ("%s: Sent packet of length %d \n", SMC_DEV_NAME, length);
/* release packet */
SMC_outw (LAN91C96_MMUCR_RELEASE_TX, LAN91C96_MMU);
/* wait for MMU getting ready (low) */
while (SMC_inw (LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY) {
udelay (10);
}
PRINTK2 ("MMU ready\n");
}
return length;
}
/*-------------------------------------------------------------------------
* smc_destructor( struct net_device * dev )
* Input parameters:
* dev, pointer to the device structure
*
* Output:
* None.
*--------------------------------------------------------------------------
*/
void smc_destructor ()
{
PRINTK2 (CARDNAME ":smc_destructor\n");
}
/*
* Open and Initialize the board
*
* Set up everything, reset the card, etc ..
*
*/
static int smc_open (bd_t *bd)
{
int i, err; /* used to set hw ethernet address */
PRINTK2 ("%s:smc_open\n", SMC_DEV_NAME);
/* reset the hardware */
smc_reset ();
smc_enable ();
SMC_SELECT_BANK (1);
err = smc_get_ethaddr (bd); /* set smc_mac_addr, and sync it with u-boot globals */
if (err < 0) {
memset (bd->bi_enetaddr, 0, 6); /* hack to make error stick! upper code will abort if not set */
return (-1); /* upper code ignores this, but NOT bi_enetaddr */
}
#ifdef USE_32_BIT
for (i = 0; i < 6; i += 2) {
word address;
address = smc_mac_addr[i + 1] << 8;
address |= smc_mac_addr[i];
SMC_outw (address, LAN91C96_IA0 + i);
}
#else
for (i = 0; i < 6; i++)
SMC_outb (smc_mac_addr[i], LAN91C96_IA0 + i);
#endif
return 0;
}
/*-------------------------------------------------------------
*
* smc_rcv - receive a packet from the card
*
* There is ( at least ) a packet waiting to be read from
* chip-memory.
*
* o Read the status
* o If an error, record it
* o otherwise, read in the packet
*-------------------------------------------------------------
*/
static int smc_rcv ()
{
int packet_number;
word status;
word packet_length;
int is_error = 0;
#ifdef USE_32_BIT
dword stat_len;
#endif
SMC_SELECT_BANK (2);
packet_number = SMC_inw (LAN91C96_FIFO);
if (packet_number & LAN91C96_FIFO_RXEMPTY) {
return 0;
}
PRINTK3 ("%s:smc_rcv\n", SMC_DEV_NAME);
/* start reading from the start of the packet */
SMC_outw (LAN91C96_PTR_READ | LAN91C96_PTR_RCV |
LAN91C96_PTR_AUTO_INCR, LAN91C96_POINTER);
/* First two words are status and packet_length */
#ifdef USE_32_BIT
stat_len = SMC_inl (LAN91C96_DATA_HIGH);
status = stat_len & 0xffff;
packet_length = stat_len >> 16;
#else
status = SMC_inw (LAN91C96_DATA_HIGH);
packet_length = SMC_inw (LAN91C96_DATA_HIGH);
#endif
packet_length &= 0x07ff; /* mask off top bits */
PRINTK2 ("RCV: STATUS %4x LENGTH %4x\n", status, packet_length);
if (!(status & FRAME_FILTER)) {
/* Adjust for having already read the first two words */
packet_length -= 4; /*4; */
/* set odd length for bug in LAN91C111, */
/* which never sets RS_ODDFRAME */
/* TODO ? */
#ifdef USE_32_BIT
PRINTK3 (" Reading %d dwords (and %d bytes) \n",
packet_length >> 2, packet_length & 3);
/* QUESTION: Like in the TX routine, do I want
to send the DWORDs or the bytes first, or some
mixture. A mixture might improve already slow PIO
performance */
SMC_insl (LAN91C96_DATA_HIGH, NetRxPackets[0], packet_length >> 2);
/* read the left over bytes */
if (packet_length & 3) {
int i;
byte *tail = (byte *) (NetRxPackets[0] + (packet_length & ~3));
dword leftover = SMC_inl (LAN91C96_DATA_HIGH);
for (i = 0; i < (packet_length & 3); i++)
*tail++ = (byte) (leftover >> (8 * i)) & 0xff;
}
#else
PRINTK3 (" Reading %d words and %d byte(s) \n",
(packet_length >> 1), packet_length & 1);
SMC_insw (LAN91C96_DATA_HIGH, NetRxPackets[0], packet_length >> 1);
#endif /* USE_32_BIT */
#if SMC_DEBUG > 2
printf ("Receiving Packet\n");
print_packet (NetRxPackets[0], packet_length);
#endif
} else {
/* error ... */
/* TODO ? */
is_error = 1;
}
while (SMC_inw (LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY)
udelay (1); /* Wait until not busy */
/* error or good, tell the card to get rid of this packet */
SMC_outw (LAN91C96_MMUCR_RELEASE_RX, LAN91C96_MMU);
while (SMC_inw (LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY)
udelay (1); /* Wait until not busy */
if (!is_error) {
/* Pass the packet up to the protocol layers. */
NetReceive (NetRxPackets[0], packet_length);
return packet_length;
} else {
return 0;
}
}
/*----------------------------------------------------
* smc_close
*
* this makes the board clean up everything that it can
* and not talk to the outside world. Caused by
* an 'ifconfig ethX down'
*
-----------------------------------------------------*/
static int smc_close ()
{
PRINTK2 ("%s:smc_close\n", SMC_DEV_NAME);
/* clear everything */
smc_shutdown ();
return 0;
}
#if SMC_DEBUG > 2
static void print_packet (byte * buf, int length)
{
#if 0
int i;
int remainder;
int lines;
printf ("Packet of length %d \n", length);
lines = length / 16;
remainder = length % 16;
for (i = 0; i < lines; i++) {
int cur;
for (cur = 0; cur < 8; cur++) {
byte a, b;
a = *(buf++);
b = *(buf++);
printf ("%02x%02x ", a, b);
}
printf ("\n");
}
for (i = 0; i < remainder / 2; i++) {
byte a, b;
a = *(buf++);
b = *(buf++);
printf ("%02x%02x ", a, b);
}
printf ("\n");
#endif /* 0 */
}
#endif /* SMC_DEBUG > 2 */
int eth_init (bd_t * bd)
{
return (smc_open(bd));
}
void eth_halt ()
{
smc_close ();
}
int eth_rx ()
{
return smc_rcv ();
}
int eth_send (volatile void *packet, int length)
{
return smc_send_packet (packet, length);
}
#if 0
/*-------------------------------------------------------------------------
* smc_hw_init()
*
* Function:
* Reset and enable the device, check if the I/O space location
* is correct
*
* Input parameters:
* None
*
* Output:
* 0 --> success
* 1 --> error
*--------------------------------------------------------------------------
*/
static int smc_hw_init ()
{
unsigned short status_test;
/* The attribute register of the LAN91C96 is located at address
0x0e000000 on the lubbock platform */
volatile unsigned *attaddr = (unsigned *) (0x0e000000);
/* first reset, then enable the device. Sequence is critical */
attaddr[LAN91C96_ECOR] |= LAN91C96_ECOR_SRESET;
udelay (100);
attaddr[LAN91C96_ECOR] &= ~LAN91C96_ECOR_SRESET;
attaddr[LAN91C96_ECOR] |= LAN91C96_ECOR_ENABLE;
/* force 16-bit mode */
attaddr[LAN91C96_ECSR] &= ~LAN91C96_ECSR_IOIS8;
udelay (100);
/* check if the I/O address is correct, the upper byte of the
bank select register should read 0x33 */
status_test = SMC_inw (LAN91C96_BANK_SELECT);
if ((status_test & 0xFF00) != 0x3300) {
printf ("Failed to initialize ethernetchip\n");
return 1;
}
return 0;
}
#endif /* 0 */
#endif /* COMMANDS & CFG_NET */
/* smc_get_ethaddr (bd_t * bd)
*
* This checks both the environment and the ROM for an ethernet address. If
* found, the environment takes precedence.
*/
int smc_get_ethaddr (bd_t * bd)
{
int env_size = 0;
int rom_valid = 0;
int env_present = 0;
int reg = 0;
char *s = NULL;
char *e = NULL;
char *v_mac, es[] = "11:22:33:44:55:66";
char s_env_mac[64];
uchar v_env_mac[6];
uchar v_rom_mac[6];
env_size = getenv_r ("ethaddr", s_env_mac, sizeof (s_env_mac));
if (env_size != sizeof(es)) { /* Ignore if env is bad or not set */
printf ("\n*** Warning: ethaddr is not set properly, ignoring!!\n");
} else {
env_present = 1;
s = s_env_mac;
for (reg = 0; reg < 6; ++reg) { /* turn string into mac value */
v_env_mac[reg] = s ? simple_strtoul (s, &e, 16) : 0;
if (s)
s = (*e) ? e + 1 : e;
}
}
rom_valid = get_rom_mac (v_rom_mac); /* get ROM mac value if any */
if (!env_present) { /* if NO env */
if (rom_valid) { /* but ROM is valid */
v_mac = (char *)v_rom_mac;
sprintf (s_env_mac, "%02X:%02X:%02X:%02X:%02X:%02X",
v_mac[0], v_mac[1], v_mac[2], v_mac[3],
v_mac[4], v_mac[5]);
setenv ("ethaddr", s_env_mac);
} else { /* no env, bad ROM */
printf ("\n*** ERROR: ethaddr is NOT set !!\n");
return (-1);
}
} else { /* good env, don't care ROM */
v_mac = (char *)v_env_mac; /* always use a good env over a ROM */
}
if (env_present && rom_valid) { /* if both env and ROM are good */
if (memcmp (v_env_mac, v_rom_mac, 6) != 0) {
printf ("\nWarning: MAC addresses don't match:\n");
printf ("\tHW MAC address: "
"%02X:%02X:%02X:%02X:%02X:%02X\n",
v_rom_mac[0], v_rom_mac[1],
v_rom_mac[2], v_rom_mac[3],
v_rom_mac[4], v_rom_mac[5] );
printf ("\t\"ethaddr\" value: "
"%02X:%02X:%02X:%02X:%02X:%02X\n",
v_env_mac[0], v_env_mac[1],
v_env_mac[2], v_env_mac[3],
v_env_mac[4], v_env_mac[5]) ;
debug ("### Set MAC addr from environment\n");
}
}
memcpy (bd->bi_enetaddr, v_mac, 6); /* update global address to match env (allows env changing) */
smc_set_mac_addr ((unsigned char *)v_mac); /* use old function to update smc default */
PRINTK("Using MAC Address %02X:%02X:%02X:%02X:%02X:%02X\n", v_mac[0], v_mac[1],
v_mac[2], v_mac[3], v_mac[4], v_mac[5]);
return (0);
}
/*
* get_rom_mac()
* Note, this has omly been tested for the OMAP730 P2.
*/
int get_rom_mac (unsigned char *v_rom_mac)
{
#ifdef HARDCODE_MAC /* used for testing or to supress run time warnings */
char hw_mac_addr[] = { 0x02, 0x80, 0xad, 0x20, 0x31, 0xb8 };
memcpy (v_rom_mac, hw_mac_addr, 6);
return (1);
#else
int i;
SMC_SELECT_BANK (1);
for (i=0; i<6; i++)
{
v_rom_mac[i] = SMC_inb (LAN91C96_IA0 + i);
}
return (1);
#endif
}
#endif /* CONFIG_DRIVER_LAN91C96 */