upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/bf533-ezkit/psd4256.h

51 lines
1.5 KiB

/*
* U-boot - psd4256.h
*
* Copyright (c) 2005-2007 Analog Devices Inc.
*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
/*
* Flash A/B Port A configuration registers.
* Addresses are offset values to CONFIG_SYS_FLASH1_BASE
* for Flash A and CONFIG_SYS_FLASH2_BASE for Flash B.
*/
#define PSD_PORTA_DIN 0x070000
#define PSD_PORTA_DOUT 0x070004
#define PSD_PORTA_DIR 0x070006
/*
* Flash A/B Port B configuration registers
* Addresses are offset values to CONFIG_SYS_FLASH1_BASE
* for Flash A and CONFIG_SYS_FLASH2_BASE for Flash B.
*/
#define PSD_PORTB_DIN 0x070001
#define PSD_PORTB_DOUT 0x070005
#define PSD_PORTB_DIR 0x070007
/*
* Flash A Port A Bit definitions
*/
#define PSDA_PPICLK1 0x20 /* PPI Clock select bit 1 */
#define PSDA_PPICLK0 0x10 /* PPI Clock select bit 0 */
#define PSDA_VDEC_RST 0x08 /* Video decoder reset, 0 = RESET */
#define PSDA_VENC_RST 0x04 /* Video encoder reset, 0 = RESET */
#define PSDA_CODEC_RST 0x01 /* Codec reset, 0 = RESET */
/*
* Flash A Port B Bit definitions
*/
#define PSDA_LED9 0x20 /* LED 9, 1 = LED ON */
#define PSDA_LED8 0x10 /* LED 8, 1 = LED ON */
#define PSDA_LED7 0x08 /* LED 7, 1 = LED ON */
#define PSDA_LED6 0x04 /* LED 6, 1 = LED ON */
#define PSDA_LED5 0x02 /* LED 5, 1 = LED ON */
#define PSDA_LED4 0x01 /* LED 4, 1 = LED ON */