upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
278 lines
6.9 KiB
278 lines
6.9 KiB
/*
|
|
* Copyright (C) 2016 Google, Inc
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <fdtdec.h>
|
|
#include <pch.h>
|
|
#include <pci.h>
|
|
#include <asm/cpu.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/io.h>
|
|
#include <asm/pci.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <dt-bindings/gpio/x86-gpio.h>
|
|
#include <dm/pinctrl.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
enum {
|
|
MAX_GPIOS = 95,
|
|
};
|
|
|
|
#define PIRQ_SHIFT 16
|
|
#define CONF_MASK 0xffff
|
|
|
|
struct pin_info {
|
|
int node;
|
|
int phandle;
|
|
bool mode_gpio;
|
|
bool dir_input;
|
|
bool invert;
|
|
bool trigger_level;
|
|
bool output_high;
|
|
bool sense_disable;
|
|
bool owner_gpio;
|
|
bool route_smi;
|
|
bool irq_enable;
|
|
bool reset_rsmrst;
|
|
bool pirq_apic_route;
|
|
};
|
|
|
|
static int broadwell_pinctrl_read_configs(struct udevice *dev,
|
|
struct pin_info *conf, int max_pins)
|
|
{
|
|
const void *blob = gd->fdt_blob;
|
|
int count = 0;
|
|
int node;
|
|
|
|
debug("%s: starting\n", __func__);
|
|
for (node = fdt_first_subnode(blob, dev->of_offset);
|
|
node > 0;
|
|
node = fdt_next_subnode(blob, node)) {
|
|
int phandle = fdt_get_phandle(blob, node);
|
|
|
|
if (!phandle)
|
|
continue;
|
|
if (count == max_pins)
|
|
return -ENOSPC;
|
|
|
|
/* We've found a new configuration */
|
|
memset(conf, '\0', sizeof(*conf));
|
|
conf->node = node;
|
|
conf->phandle = phandle;
|
|
conf->mode_gpio = fdtdec_get_bool(blob, node, "mode-gpio");
|
|
if (fdtdec_get_int(blob, node, "direction", -1) == PIN_INPUT)
|
|
conf->dir_input = true;
|
|
conf->invert = fdtdec_get_bool(blob, node, "invert");
|
|
if (fdtdec_get_int(blob, node, "trigger", -1) == TRIGGER_LEVEL)
|
|
conf->trigger_level = true;
|
|
if (fdtdec_get_int(blob, node, "output-value", -1) == 1)
|
|
conf->output_high = true;
|
|
conf->sense_disable = fdtdec_get_bool(blob, node,
|
|
"sense-disable");
|
|
if (fdtdec_get_int(blob, node, "owner", -1) == OWNER_GPIO)
|
|
conf->owner_gpio = true;
|
|
if (fdtdec_get_int(blob, node, "route", -1) == ROUTE_SMI)
|
|
conf->route_smi = true;
|
|
conf->irq_enable = fdtdec_get_bool(blob, node, "irq-enable");
|
|
conf->reset_rsmrst = fdtdec_get_bool(blob, node,
|
|
"reset-rsmrst");
|
|
if (fdtdec_get_int(blob, node, "pirq-apic", -1) ==
|
|
PIRQ_APIC_ROUTE)
|
|
conf->pirq_apic_route = true;
|
|
debug("config: phandle=%d\n", phandle);
|
|
count++;
|
|
conf++;
|
|
}
|
|
debug("%s: Found %d configurations\n", __func__, count);
|
|
|
|
return count;
|
|
}
|
|
|
|
static int broadwell_pinctrl_lookup_phandle(struct pin_info *conf,
|
|
int conf_count, int phandle)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < conf_count; i++) {
|
|
if (conf[i].phandle == phandle)
|
|
return i;
|
|
}
|
|
|
|
return -ENOENT;
|
|
}
|
|
|
|
static int broadwell_pinctrl_read_pins(struct udevice *dev,
|
|
struct pin_info *conf, int conf_count, int gpio_conf[],
|
|
int num_gpios)
|
|
{
|
|
const void *blob = gd->fdt_blob;
|
|
int count = 0;
|
|
int node;
|
|
|
|
for (node = fdt_first_subnode(blob, dev->of_offset);
|
|
node > 0;
|
|
node = fdt_next_subnode(blob, node)) {
|
|
int len, i;
|
|
const u32 *prop = fdt_getprop(blob, node, "config", &len);
|
|
|
|
if (!prop)
|
|
continue;
|
|
|
|
/* There are three cells per pin */
|
|
count = len / (sizeof(u32) * 3);
|
|
debug("Found %d GPIOs to configure\n", count);
|
|
for (i = 0; i < count; i++) {
|
|
uint gpio = fdt32_to_cpu(prop[i * 3]);
|
|
uint phandle = fdt32_to_cpu(prop[i * 3 + 1]);
|
|
int val;
|
|
|
|
if (gpio >= num_gpios) {
|
|
debug("%s: GPIO %d out of range\n", __func__,
|
|
gpio);
|
|
return -EDOM;
|
|
}
|
|
val = broadwell_pinctrl_lookup_phandle(conf, conf_count,
|
|
phandle);
|
|
if (val < 0) {
|
|
debug("%s: Cannot find phandle %d\n", __func__,
|
|
phandle);
|
|
return -EINVAL;
|
|
}
|
|
gpio_conf[gpio] = val |
|
|
fdt32_to_cpu(prop[i * 3 + 2]) << PIRQ_SHIFT;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void broadwell_pinctrl_commit(struct pch_lp_gpio_regs *regs,
|
|
struct pin_info *pin_info,
|
|
int gpio_conf[], int count)
|
|
{
|
|
u32 owner_gpio[GPIO_BANKS] = {0};
|
|
u32 route_smi[GPIO_BANKS] = {0};
|
|
u32 irq_enable[GPIO_BANKS] = {0};
|
|
u32 reset_rsmrst[GPIO_BANKS] = {0};
|
|
u32 pirq2apic = 0;
|
|
int set, bit, gpio = 0;
|
|
|
|
for (gpio = 0; gpio < MAX_GPIOS; gpio++) {
|
|
int confnum = gpio_conf[gpio] & CONF_MASK;
|
|
struct pin_info *pin = &pin_info[confnum];
|
|
u32 val;
|
|
|
|
val = pin->mode_gpio << CONFA_MODE_SHIFT |
|
|
pin->dir_input << CONFA_DIR_SHIFT |
|
|
pin->invert << CONFA_INVERT_SHIFT |
|
|
pin->trigger_level << CONFA_TRIGGER_SHIFT |
|
|
pin->output_high << CONFA_OUTPUT_SHIFT;
|
|
outl(val, ®s->config[gpio].conf_a);
|
|
outl(pin->sense_disable << CONFB_SENSE_SHIFT,
|
|
®s->config[gpio].conf_b);
|
|
|
|
/* Determine set and bit based on GPIO number */
|
|
set = gpio / GPIO_PER_BANK;
|
|
bit = gpio % GPIO_PER_BANK;
|
|
|
|
/* Apply settings to set specific bits */
|
|
owner_gpio[set] |= pin->owner_gpio << bit;
|
|
route_smi[set] |= pin->route_smi << bit;
|
|
irq_enable[set] |= pin->irq_enable << bit;
|
|
reset_rsmrst[set] |= pin->reset_rsmrst << bit;
|
|
|
|
/* PIRQ to IO-APIC map */
|
|
if (pin->pirq_apic_route)
|
|
pirq2apic |= gpio_conf[gpio] >> PIRQ_SHIFT;
|
|
debug("gpio %d: conf %d, mode_gpio %d, dir_input %d, output_high %d\n",
|
|
gpio, confnum, pin->mode_gpio, pin->dir_input,
|
|
pin->output_high);
|
|
}
|
|
|
|
for (set = 0; set < GPIO_BANKS; set++) {
|
|
outl(owner_gpio[set], ®s->own[set]);
|
|
outl(route_smi[set], ®s->gpi_route[set]);
|
|
outl(irq_enable[set], ®s->gpi_ie[set]);
|
|
outl(reset_rsmrst[set], ®s->rst_sel[set]);
|
|
}
|
|
|
|
outl(pirq2apic, ®s->pirq_to_ioxapic);
|
|
}
|
|
|
|
static int broadwell_pinctrl_probe(struct udevice *dev)
|
|
{
|
|
struct pch_lp_gpio_regs *regs;
|
|
struct pin_info conf[12];
|
|
int gpio_conf[MAX_GPIOS];
|
|
struct udevice *pch;
|
|
int conf_count;
|
|
u32 gpiobase;
|
|
int ret;
|
|
|
|
ret = uclass_first_device(UCLASS_PCH, &pch);
|
|
if (ret)
|
|
return ret;
|
|
if (!pch)
|
|
return -ENODEV;
|
|
debug("%s: start\n", __func__);
|
|
|
|
/* Only init once, before relocation */
|
|
if (gd->flags & GD_FLG_RELOC)
|
|
return 0;
|
|
|
|
/*
|
|
* Get the memory/io base address to configure every pins.
|
|
* IOBASE is used to configure the mode/pads
|
|
* GPIOBASE is used to configure the direction and default value
|
|
*/
|
|
ret = pch_get_gpio_base(pch, &gpiobase);
|
|
if (ret) {
|
|
debug("%s: invalid GPIOBASE address (%08x)\n", __func__,
|
|
gpiobase);
|
|
return -EINVAL;
|
|
}
|
|
|
|
conf_count = broadwell_pinctrl_read_configs(dev, conf,
|
|
ARRAY_SIZE(conf));
|
|
if (conf_count < 0) {
|
|
debug("%s: Cannot read configs: err=%d\n", __func__, ret);
|
|
return conf_count;
|
|
}
|
|
|
|
/*
|
|
* Assume that pin settings are provided for every pin. Pins not
|
|
* mentioned will get the first config mentioned in the list.
|
|
*/
|
|
ret = broadwell_pinctrl_read_pins(dev, conf, conf_count, gpio_conf,
|
|
MAX_GPIOS);
|
|
if (ret) {
|
|
debug("%s: Cannot read pin settings: err=%d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
regs = (struct pch_lp_gpio_regs *)gpiobase;
|
|
broadwell_pinctrl_commit(regs, conf, gpio_conf, ARRAY_SIZE(conf));
|
|
|
|
debug("%s: done\n", __func__);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id broadwell_pinctrl_match[] = {
|
|
{ .compatible = "intel,x86-broadwell-pinctrl",
|
|
.data = X86_SYSCON_PINCONF },
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(broadwell_pinctrl) = {
|
|
.name = "broadwell_pinctrl",
|
|
.id = UCLASS_SYSCON,
|
|
.of_match = broadwell_pinctrl_match,
|
|
.probe = broadwell_pinctrl_probe,
|
|
};
|
|
|