upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/bf537-stamp/nand.c

106 lines
3.1 KiB

/*
* (C) Copyright 2006 Aubrey.Li, aubrey.li@analog.com
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/io.h>
#if (CONFIG_COMMANDS & CFG_CMD_NAND)
#include <nand.h>
#define CONCAT(a,b,c,d) a ## b ## c ## d
#define PORT(a,b) CONCAT(pPORT,a,b,)
#ifndef CONFIG_NAND_GPIO_PORT
#define CONFIG_NAND_GPIO_PORT F
#endif
/*
* hardware specific access to control-lines
*/
static void bfin_hwcontrol(struct mtd_info *mtd, int cmd)
{
register struct nand_chip *this = mtd->priv;
switch (cmd) {
case NAND_CTL_SETCLE:
this->IO_ADDR_W = CFG_NAND_BASE + BFIN_NAND_CLE;
break;
case NAND_CTL_CLRCLE:
this->IO_ADDR_W = CFG_NAND_BASE;
break;
case NAND_CTL_SETALE:
this->IO_ADDR_W = CFG_NAND_BASE + BFIN_NAND_ALE;
break;
case NAND_CTL_CLRALE:
this->IO_ADDR_W = CFG_NAND_BASE;
break;
case NAND_CTL_SETNCE:
case NAND_CTL_CLRNCE:
break;
}
this->IO_ADDR_R = this->IO_ADDR_W;
/* Drain the writebuffer */
sync();
}
int bfin_device_ready(struct mtd_info *mtd)
{
int ret = (*PORT(CONFIG_NAND_GPIO_PORT, IO) & BFIN_NAND_READY) ? 1 : 0;
sync();
return ret;
}
/*
* Board-specific NAND initialization. The following members of the
* argument are board-specific (per include/linux/mtd/nand.h):
* - IO_ADDR_R?: address to read the 8 I/O lines of the flash device
* - IO_ADDR_W?: address to write the 8 I/O lines of the flash device
* - hwcontrol: hardwarespecific function for accesing control-lines
* - dev_ready: hardwarespecific function for accesing device ready/busy line
* - enable_hwecc?: function to enable (reset) hardware ecc generator. Must
* only be provided if a hardware ECC is available
* - eccmode: mode of ecc, see defines
* - chip_delay: chip dependent delay for transfering data from array to
* read regs (tR)
* - options: various chip options. They can partly be set to inform
* nand_scan about special functionality. See the defines for further
* explanation
* Members with a "?" were not set in the merged testing-NAND branch,
* so they are not set here either.
*/
void board_nand_init(struct nand_chip *nand)
{
*PORT(CONFIG_NAND_GPIO_PORT, _FER) &= ~BFIN_NAND_READY;
*PORT(CONFIG_NAND_GPIO_PORT, IO_DIR) &= ~BFIN_NAND_READY;
*PORT(CONFIG_NAND_GPIO_PORT, IO_INEN) |= BFIN_NAND_READY;
nand->hwcontrol = bfin_hwcontrol;
nand->eccmode = NAND_ECC_SOFT;
nand->dev_ready = bfin_device_ready;
nand->chip_delay = 30;
}
#endif /* (CONFIG_COMMANDS & CFG_CMD_NAND) */