upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
70 lines
1.6 KiB
70 lines
1.6 KiB
/*
|
|
* Copyright (C) 2008-2009 Samsung Electronics
|
|
* Kyungmin Park <kyungmin.park@samsung.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <linux/compat.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/onenand.h>
|
|
#include <linux/mtd/samsung_onenand.h>
|
|
|
|
#include <onenand_uboot.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
|
|
int onenand_board_init(struct mtd_info *mtd)
|
|
{
|
|
struct onenand_chip *this = mtd->priv;
|
|
struct s5pc100_clock *clk =
|
|
(struct s5pc100_clock *)samsung_get_base_clock();
|
|
struct samsung_onenand *onenand;
|
|
int value;
|
|
|
|
this->base = (void *)S5PC100_ONENAND_BASE;
|
|
onenand = (struct samsung_onenand *)this->base;
|
|
|
|
/* D0 Domain memory clock gating */
|
|
value = readl(&clk->gate_d01);
|
|
value &= ~(1 << 2); /* CLK_ONENANDC */
|
|
value |= (1 << 2);
|
|
writel(value, &clk->gate_d01);
|
|
|
|
value = readl(&clk->src0);
|
|
value &= ~(1 << 24); /* MUX_1nand: 0 from HCLKD0 */
|
|
value &= ~(1 << 20); /* MUX_HREF: 0 from FIN_27M */
|
|
writel(value, &clk->src0);
|
|
|
|
value = readl(&clk->div1);
|
|
value &= ~(3 << 16); /* PCLKD1_RATIO */
|
|
value |= (1 << 16);
|
|
writel(value, &clk->div1);
|
|
|
|
writel(ONENAND_MEM_RESET_COLD, &onenand->mem_reset);
|
|
|
|
while (!(readl(&onenand->int_err_stat) & RST_CMP))
|
|
continue;
|
|
|
|
writel(RST_CMP, &onenand->int_err_ack);
|
|
|
|
/*
|
|
* Access_Clock [2:0]
|
|
* 166 MHz, 134 Mhz : 3
|
|
* 100 Mhz, 60 Mhz : 2
|
|
*/
|
|
writel(0x3, &onenand->acc_clock);
|
|
|
|
writel(INT_ERR_ALL, &onenand->int_err_mask);
|
|
writel(1 << 0, &onenand->int_pin_en); /* Enable */
|
|
|
|
value = readl(&onenand->int_err_mask);
|
|
value &= ~RDY_ACT;
|
|
writel(value, &onenand->int_err_mask);
|
|
|
|
s3c_onenand_init(mtd);
|
|
|
|
return 0;
|
|
}
|
|
|