upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/drivers/net/fsl_mdio.c

120 lines
3.0 KiB

/*
* Copyright 2009-2010 Freescale Semiconductor, Inc.
* Jun-jie Zhang <b18070@freescale.com>
* Mingkai Hu <Mingkai.hu@freescale.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <miiphy.h>
#include <phy.h>
#include <fsl_mdio.h>
#include <asm/io.h>
#include <asm/errno.h>
#include <asm/fsl_enet.h>
void tsec_local_mdio_write(struct tsec_mii_mng *phyregs, int port_addr,
int dev_addr, int regnum, int value)
{
int timeout = 1000000;
out_be32(&phyregs->miimadd, (port_addr << 8) | (regnum & 0x1f));
out_be32(&phyregs->miimcon, value);
asm("sync");
while ((in_be32(&phyregs->miimind) & MIIMIND_BUSY) && timeout--)
;
}
int tsec_local_mdio_read(struct tsec_mii_mng *phyregs, int port_addr,
int dev_addr, int regnum)
{
int value;
int timeout = 1000000;
/* Put the address of the phy, and the register
* number into MIIMADD */
out_be32(&phyregs->miimadd, (port_addr << 8) | (regnum & 0x1f));
/* Clear the command register, and wait */
out_be32(&phyregs->miimcom, 0);
asm("sync");
/* Initiate a read command, and wait */
out_be32(&phyregs->miimcom, MIIMCOM_READ_CYCLE);
asm("sync");
/* Wait for the the indication that the read is done */
while ((in_be32(&phyregs->miimind) & (MIIMIND_NOTVALID | MIIMIND_BUSY))
&& timeout--)
;
/* Grab the value read from the PHY */
value = in_be32(&phyregs->miimstat);
return value;
}
static int fsl_pq_mdio_reset(struct mii_dev *bus)
{
struct tsec_mii_mng *regs = bus->priv;
/* Reset MII (due to new addresses) */
out_be32(&regs->miimcfg, MIIMCFG_RESET_MGMT);
out_be32(&regs->miimcfg, MIIMCFG_INIT_VALUE);
while (in_be32(&regs->miimind) & MIIMIND_BUSY)
;
return 0;
}
int tsec_phy_read(struct mii_dev *bus, int addr, int dev_addr, int regnum)
{
struct tsec_mii_mng *phyregs = bus->priv;
return tsec_local_mdio_read(phyregs, addr, dev_addr, regnum);
}
int tsec_phy_write(struct mii_dev *bus, int addr, int dev_addr, int regnum,
u16 value)
{
struct tsec_mii_mng *phyregs = bus->priv;
tsec_local_mdio_write(phyregs, addr, dev_addr, regnum, value);
return 0;
}
int fsl_pq_mdio_init(bd_t *bis, struct fsl_pq_mdio_info *info)
{
struct mii_dev *bus = mdio_alloc();
if (!bus) {
printf("Failed to allocate FSL MDIO bus\n");
return -1;
}
bus->read = tsec_phy_read;
bus->write = tsec_phy_write;
bus->reset = fsl_pq_mdio_reset;
sprintf(bus->name, info->name);
bus->priv = info->regs;
return mdio_register(bus);
}