upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/freescale/mx53smd/mx53smd.c

223 lines
6.2 KiB

/*
* (C) Copyright 2011 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/mx5x_pins.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/iomux.h>
#include <asm/errno.h>
#include <netdev.h>
#include <mmc.h>
#include <fsl_esdhc.h>
#include <asm/gpio.h>
DECLARE_GLOBAL_DATA_PTR;
int dram_init(void)
{
u32 size1, size2;
size1 = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
size2 = get_ram_size((void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE);
gd->ram_size = size1 + size2;
return 0;
}
void dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
}
static void setup_iomux_uart(void)
{
/* UART1 RXD */
mxc_request_iomux(MX53_PIN_CSI0_D11, IOMUX_CONFIG_ALT2);
mxc_iomux_set_pad(MX53_PIN_CSI0_D11,
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU |
PAD_CTL_ODE_OPENDRAIN_ENABLE);
mxc_iomux_set_input(MX53_UART1_IPP_UART_RXD_MUX_SELECT_INPUT, 0x1);
/* UART1 TXD */
mxc_request_iomux(MX53_PIN_CSI0_D10, IOMUX_CONFIG_ALT2);
mxc_iomux_set_pad(MX53_PIN_CSI0_D10,
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU |
PAD_CTL_ODE_OPENDRAIN_ENABLE);
}
static void setup_iomux_fec(void)
{
/*FEC_MDIO*/
mxc_request_iomux(MX53_PIN_FEC_MDIO, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX53_PIN_FEC_MDIO,
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
PAD_CTL_22K_PU | PAD_CTL_ODE_OPENDRAIN_ENABLE);
mxc_iomux_set_input(MX53_FEC_FEC_MDI_SELECT_INPUT, 0x1);
/*FEC_MDC*/
mxc_request_iomux(MX53_PIN_FEC_MDC, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX53_PIN_FEC_MDC, PAD_CTL_DRV_HIGH);
/* FEC RXD1 */
mxc_request_iomux(MX53_PIN_FEC_RXD1, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX53_PIN_FEC_RXD1,
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
/* FEC RXD0 */
mxc_request_iomux(MX53_PIN_FEC_RXD0, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX53_PIN_FEC_RXD0,
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
/* FEC TXD1 */
mxc_request_iomux(MX53_PIN_FEC_TXD1, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX53_PIN_FEC_TXD1, PAD_CTL_DRV_HIGH);
/* FEC TXD0 */
mxc_request_iomux(MX53_PIN_FEC_TXD0, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX53_PIN_FEC_TXD0, PAD_CTL_DRV_HIGH);
/* FEC TX_EN */
mxc_request_iomux(MX53_PIN_FEC_TX_EN, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX53_PIN_FEC_TX_EN, PAD_CTL_DRV_HIGH);
/* FEC TX_CLK */
mxc_request_iomux(MX53_PIN_FEC_REF_CLK, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX53_PIN_FEC_REF_CLK,
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
/* FEC RX_ER */
mxc_request_iomux(MX53_PIN_FEC_RX_ER, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX53_PIN_FEC_RX_ER,
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
/* FEC CRS */
mxc_request_iomux(MX53_PIN_FEC_CRS_DV, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX53_PIN_FEC_CRS_DV,
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE);
}
#ifdef CONFIG_FSL_ESDHC
struct fsl_esdhc_cfg esdhc_cfg[1] = {
{MMC_SDHC1_BASE_ADDR, 1},
};
int board_mmc_getcd(struct mmc *mmc)
{
mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1);
gpio_direction_input(77);
return !gpio_get_value(77); /* GPIO3_13 */
}
int board_mmc_init(bd_t *bis)
{
u32 index;
s32 status = 0;
for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) {
switch (index) {
case 0:
mxc_request_iomux(MX53_PIN_SD1_CMD, IOMUX_CONFIG_ALT0);
mxc_request_iomux(MX53_PIN_SD1_CLK, IOMUX_CONFIG_ALT0);
mxc_request_iomux(MX53_PIN_SD1_DATA0,
IOMUX_CONFIG_ALT0);
mxc_request_iomux(MX53_PIN_SD1_DATA1,
IOMUX_CONFIG_ALT0);
mxc_request_iomux(MX53_PIN_SD1_DATA2,
IOMUX_CONFIG_ALT0);
mxc_request_iomux(MX53_PIN_SD1_DATA3,
IOMUX_CONFIG_ALT0);
mxc_request_iomux(MX53_PIN_EIM_DA13,
IOMUX_CONFIG_ALT1);
mxc_iomux_set_pad(MX53_PIN_SD1_CMD,
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU);
mxc_iomux_set_pad(MX53_PIN_SD1_CLK,
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
PAD_CTL_DRV_HIGH);
mxc_iomux_set_pad(MX53_PIN_SD1_DATA0,
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
mxc_iomux_set_pad(MX53_PIN_SD1_DATA1,
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
mxc_iomux_set_pad(MX53_PIN_SD1_DATA2,
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
mxc_iomux_set_pad(MX53_PIN_SD1_DATA3,
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE |
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
break;
default:
printf("Warning: you configured more ESDHC controller"
"(%d) as supported by the board(1)\n",
CONFIG_SYS_FSL_ESDHC_NUM);
return status;
}
status |= fsl_esdhc_initialize(bis, &esdhc_cfg[index]);
}
return status;
}
#endif
int board_early_init_f(void)
{
setup_iomux_uart();
setup_iomux_fec();
return 0;
}
int board_init(void)
{
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
return 0;
}
int checkboard(void)
{
puts("Board: MX53SMD\n");
return 0;
}