upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
289 lines
6.3 KiB
289 lines
6.3 KiB
/*
|
|
* Copyright 2009,2012 Freescale Semiconductor, Inc.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <hwconfig.h>
|
|
#include <command.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/immap_85xx.h>
|
|
#include <asm/mpc85xx_gpio.h>
|
|
#include <asm/fsl_serdes.h>
|
|
#include <asm/io.h>
|
|
#include <miiphy.h>
|
|
#include <libfdt.h>
|
|
#include <fdt_support.h>
|
|
#include <fsl_mdio.h>
|
|
#include <tsec.h>
|
|
#include <vsc7385.h>
|
|
#include <netdev.h>
|
|
#include <mmc.h>
|
|
#include <malloc.h>
|
|
#include <i2c.h>
|
|
|
|
#if defined(CONFIG_PCI)
|
|
#include <asm/fsl_pci.h>
|
|
#include <pci.h>
|
|
#endif
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#if defined(CONFIG_PCI)
|
|
void pci_init_board(void)
|
|
{
|
|
fsl_pcie_init_board(0);
|
|
}
|
|
|
|
void ft_pci_board_setup(void *blob)
|
|
{
|
|
FT_FSL_PCI_SETUP;
|
|
}
|
|
#endif
|
|
|
|
#define BOARD_PERI_RST_SET (VSC7385_RST_SET | SLIC_RST_SET | \
|
|
SGMII_PHY_RST_SET | PCIE_RST_SET | \
|
|
RGMII_PHY_RST_SET)
|
|
|
|
#define SYSCLK_MASK 0x00200000
|
|
#define BOARDREV_MASK 0x10100000
|
|
#define BOARDREV_B 0x10100000
|
|
#define BOARDREV_C 0x00100000
|
|
#define BOARDREV_D 0x00000000
|
|
|
|
#define SYSCLK_66 66666666
|
|
#define SYSCLK_50 50000000
|
|
#define SYSCLK_100 100000000
|
|
|
|
unsigned long get_board_sys_clk(ulong dummy)
|
|
{
|
|
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
u32 ddr_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO;
|
|
|
|
ddr_ratio >>= MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
|
|
switch (ddr_ratio) {
|
|
case 0x0C:
|
|
return SYSCLK_66;
|
|
case 0x0A:
|
|
case 0x08:
|
|
return SYSCLK_100;
|
|
default:
|
|
puts("ERROR: unknown DDR ratio\n");
|
|
return SYSCLK_100;
|
|
}
|
|
}
|
|
|
|
unsigned long get_board_ddr_clk(ulong dummy)
|
|
{
|
|
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
u32 ddr_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO;
|
|
|
|
ddr_ratio >>= MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
|
|
switch (ddr_ratio) {
|
|
case 0x0C:
|
|
case 0x0A:
|
|
return SYSCLK_66;
|
|
case 0x08:
|
|
return SYSCLK_100;
|
|
default:
|
|
puts("ERROR: unknown DDR ratio\n");
|
|
return SYSCLK_100;
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_MMC
|
|
int board_early_init_f(void)
|
|
{
|
|
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
|
|
setbits_be32(&gur->pmuxcr,
|
|
(MPC85xx_PMUXCR_SDHC_CD |
|
|
MPC85xx_PMUXCR_SDHC_WP));
|
|
|
|
/* All the device are enable except for SRIO12 */
|
|
setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_SRIO);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#define GPIO_DIR 0x0f3a0000
|
|
#define GPIO_ODR 0x00000000
|
|
#define GPIO_DAT 0x001a0000
|
|
|
|
int checkboard(void)
|
|
{
|
|
ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR + 0xC00);
|
|
|
|
/*
|
|
* GPIO
|
|
* 0 - 3: CarryBoard Input;
|
|
* 4 - 7: CarryBoard Output;
|
|
* 8 : Mux as SDHC_CD (card detection)
|
|
* 9 : Mux as SDHC_WP
|
|
* 10 : Clear Watchdog timer
|
|
* 11 : LED Input
|
|
* 12 : Output to 1
|
|
* 13 : Open Drain
|
|
* 14 : LED Output
|
|
* 15 : Switch Input
|
|
*
|
|
* Set GPIOs 11, 12, 14 to 1.
|
|
*/
|
|
out_be32(&pgpio->gpodr, GPIO_ODR);
|
|
mpc85xx_gpio_set(0xffffffff, GPIO_DIR, GPIO_DAT);
|
|
|
|
puts("Board: Freescale COM Express P2020\n");
|
|
return 0;
|
|
}
|
|
|
|
#define M41ST85W_I2C_BUS 1
|
|
#define M41ST85W_I2C_ADDR 0x68
|
|
#define M41ST85W_ERROR(fmt, args...) printf("ERROR: M41ST85W: " fmt, ##args)
|
|
|
|
static void m41st85w_clear_bit(u8 reg, u8 mask, const char *name)
|
|
{
|
|
u8 data;
|
|
|
|
if (i2c_read(M41ST85W_I2C_ADDR, reg, 1, &data, 1)) {
|
|
M41ST85W_ERROR("unable to read %s bit\n", name);
|
|
return;
|
|
}
|
|
|
|
if (data & mask) {
|
|
data &= ~mask;
|
|
if (i2c_write(M41ST85W_I2C_ADDR, reg, 1, &data, 1)) {
|
|
M41ST85W_ERROR("unable to clear %s bit\n", name);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
#define M41ST85W_REG_SEC2 0x01
|
|
#define M41ST85W_REG_SEC2_ST 0x80
|
|
|
|
#define M41ST85W_REG_ALHOUR 0x0c
|
|
#define M41ST85W_REG_ALHOUR_HT 0x40
|
|
|
|
/*
|
|
* The P2020COME board has a STMicro M41ST85W RTC/watchdog
|
|
* at i2c bus 1 address 0x68.
|
|
*/
|
|
static void start_rtc(void)
|
|
{
|
|
unsigned int bus = i2c_get_bus_num();
|
|
|
|
if (i2c_set_bus_num(M41ST85W_I2C_BUS)) {
|
|
M41ST85W_ERROR("unable to set i2c bus\n");
|
|
goto out;
|
|
}
|
|
|
|
/* ensure ST (stop) and HT (halt update) bits are cleared */
|
|
m41st85w_clear_bit(M41ST85W_REG_SEC2, M41ST85W_REG_SEC2_ST, "ST");
|
|
m41st85w_clear_bit(M41ST85W_REG_ALHOUR, M41ST85W_REG_ALHOUR_HT, "HT");
|
|
|
|
out:
|
|
/* reset the i2c bus */
|
|
i2c_set_bus_num(bus);
|
|
}
|
|
|
|
int board_early_init_r(void)
|
|
{
|
|
start_rtc();
|
|
return 0;
|
|
}
|
|
|
|
#define M41ST85W_REG_WATCHDOG 0x09
|
|
#define M41ST85W_REG_WATCHDOG_WDS 0x80
|
|
#define M41ST85W_REG_WATCHDOG_BMB0 0x04
|
|
|
|
void board_reset(void)
|
|
{
|
|
u8 data = M41ST85W_REG_WATCHDOG_WDS | M41ST85W_REG_WATCHDOG_BMB0;
|
|
|
|
/* set the hardware watchdog timeout to 1/16 second, then hang */
|
|
i2c_set_bus_num(M41ST85W_I2C_BUS);
|
|
i2c_write(M41ST85W_I2C_ADDR, M41ST85W_REG_WATCHDOG, 1, &data, 1);
|
|
|
|
while (1)
|
|
/* hang */;
|
|
}
|
|
|
|
#ifdef CONFIG_TSEC_ENET
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
struct fsl_pq_mdio_info mdio_info;
|
|
struct tsec_info_struct tsec_info[4];
|
|
int num = 0;
|
|
|
|
#ifdef CONFIG_TSEC1
|
|
SET_STD_TSEC_INFO(tsec_info[num], 1);
|
|
num++;
|
|
#endif
|
|
#ifdef CONFIG_TSEC2
|
|
SET_STD_TSEC_INFO(tsec_info[num], 2);
|
|
num++;
|
|
#endif
|
|
#ifdef CONFIG_TSEC3
|
|
SET_STD_TSEC_INFO(tsec_info[num], 3);
|
|
if (is_serdes_configured(SGMII_TSEC3)) {
|
|
puts("eTSEC3 is in sgmii mode.");
|
|
tsec_info[num].flags |= TSEC_SGMII;
|
|
}
|
|
num++;
|
|
#endif
|
|
if (!num) {
|
|
printf("No TSECs initialized\n");
|
|
return 0;
|
|
}
|
|
|
|
mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
|
|
mdio_info.name = DEFAULT_MII_NAME;
|
|
fsl_pq_mdio_init(bis, &mdio_info);
|
|
|
|
tsec_eth_init(bis, tsec_info, num);
|
|
|
|
return pci_eth_init(bis);
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_OF_BOARD_SETUP)
|
|
void ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
phys_addr_t base;
|
|
phys_size_t size;
|
|
|
|
ft_cpu_setup(blob, bd);
|
|
|
|
base = getenv_bootm_low();
|
|
size = getenv_bootm_size();
|
|
|
|
#if defined(CONFIG_PCI)
|
|
ft_pci_board_setup(blob);
|
|
#endif
|
|
|
|
fdt_fixup_memory(blob, (u64)base, (u64)size);
|
|
|
|
#ifdef CONFIG_HAS_FSL_DR_USB
|
|
fdt_fixup_dr_usb(blob, bd);
|
|
#endif
|
|
}
|
|
#endif
|
|
|