upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/doc/README.OXC

814 B

This document contains different information about the port
of U-Boot for the OXC board designed by Lucent Technologies,
Inc.

1. Showing activity

U-Boot for the OXC board can show its current status using
the Active LED. This feature is configured by the following
options:

CONFIG_SHOW_ACTIVITY

When this option is on, the Active LED is blinking fast
when U-Boot runs in the idle loop (i.e. waits for user
commands from serial console) and blinking slow when it
downloads an image over network. When U-Boot loads an image
over serial line the Active LED does not blink and its state
is random (i.e. either constant on or constant off).

CONFIG_SHOW_BOOT_PROGRESS

When this option is on, U-Boot switches the Active LED
off before booting an image and switches it on if booting
failed due to some reasons.