upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
298 lines
7.5 KiB
298 lines
7.5 KiB
/*
|
|
* Board specific setup info
|
|
*
|
|
* (C) Copyright 2003
|
|
* Texas Instruments, <www.ti.com>
|
|
* Kshitij Gupta <Kshitij@ti.com>
|
|
*
|
|
* Modified for the NS9750 DevBoard by
|
|
* (C) Copyright 2004 by FS Forth-Systeme GmbH.
|
|
* Markus Pietrek <mpietrek@fsforth.de>
|
|
* @References: [1] NS9750 Hardware Reference/December 2003
|
|
* [2] ns9750_a.cmd from MAJIC configuration
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <version.h>
|
|
|
|
#if defined(CONFIG_NS9750DEV)
|
|
# ifdef CONFIG_INIT_CRITICAL
|
|
# include <./ns9750_sys.h>
|
|
# include <./ns9750_mem.h>
|
|
# endif
|
|
#endif
|
|
|
|
/***********************************************************************
|
|
* @Function: write_register_block
|
|
* @Return: nothing
|
|
* @Descr: Copies the register block of register_offset:register value to
|
|
* the registers at base r0. The block is assumed to start in RAM at r1
|
|
* and end at r2. The linked RAM base address of U-Boot is assumed to be
|
|
* in r5 while the ROM base address we are running from is r6
|
|
* Uses r3 and r4 as tempory registers
|
|
***********************************************************************/
|
|
|
|
.macro write_register_block
|
|
@@ map the addresses to high memory
|
|
sub r1, r1, r5
|
|
add r1, r1, r6
|
|
sub r2, r2, r5
|
|
add r2, r2, r6
|
|
|
|
@@ copy all
|
|
1:
|
|
@@ Write register/value pair starting at [r1] to register base r0
|
|
ldr r3, [r1], #4
|
|
ldr r4, [r1], #4
|
|
str r4, [r0,r3]
|
|
cmp r1, r2
|
|
blt 1b
|
|
.endm
|
|
|
|
_TEXT_BASE:
|
|
.word TEXT_BASE @ sdram load addr from config.mk
|
|
_PHYS_FLASH:
|
|
.word PHYS_FLASH_1 @ real flash address (without mirroring)
|
|
_CAS_LATENCY:
|
|
.word 0x00022000 @ for CAS2 latency
|
|
|
|
#ifdef CONFIG_INIT_CRITICAL
|
|
.globl platformsetup
|
|
platformsetup:
|
|
|
|
/* U-Boot may be linked to RAM at 0x780000. But this code will run in
|
|
flash from 0x0. But in order to enable RAM we have to disable the
|
|
mirror bit, therefore we have to jump to our real flash address
|
|
beginning at PHYS_FLASH_1 (CS4 Base). Therefore,
|
|
_run_at_real_flash_address may be 0x500003b0 while be linked to
|
|
0x7803b0. So we must modify our linked addresses */
|
|
|
|
@@ branch to high memory address, away from 0x0
|
|
ldr r5, _TEXT_BASE
|
|
ldr r6, _PHYS_FLASH
|
|
ldr r0, =_run_at_real_flash_address
|
|
sub r0, r0, r5
|
|
add r0, r0, r6
|
|
mov pc, r0
|
|
nop @ for pipelining
|
|
|
|
_run_at_real_flash_address:
|
|
@@ now we are running > PHYS_FLASH_1, safe to enable memory controller
|
|
|
|
@@ Write Memory Configuration Registers
|
|
|
|
ldr r0, _NS9750_MEM_MODULE_BASE
|
|
ldr r1, =_MEM_CONFIG_START
|
|
ldr r2, =_MEM_CONFIG_END
|
|
|
|
write_register_block
|
|
|
|
@@ Give SDRAM some time to settle
|
|
@@ @TODO. According to [2] it should be 2 AHB cycles. Check
|
|
|
|
ldr r1, =0x50
|
|
_sdram_settle:
|
|
subs r1, r1, #1
|
|
bne _sdram_settle
|
|
|
|
_enable_mappings:
|
|
@@ Enable SDRAM Mode
|
|
|
|
ldr r1, =_MEM_MODE_START
|
|
ldr r2, =_MEM_MODE_END
|
|
|
|
write_register_block
|
|
|
|
ldr r3, _CAS_LATENCY @ perform one read from SDRAM
|
|
ldr r3, [r3]
|
|
|
|
@@ Enable SDRAM and memory mappings
|
|
|
|
ldr r1, =_MEM_ENABLE_START
|
|
ldr r2, =_MEM_ENABLE_END
|
|
|
|
write_register_block
|
|
|
|
@@ Activate AHB monitor
|
|
|
|
ldr r0, =NS9750_SYS_MODULE_BASE
|
|
ldr r1, =_AHB_MONITOR_START
|
|
ldr r2, =_AHB_MONITOR_END
|
|
|
|
write_register_block
|
|
_relocate_lr:
|
|
/* lr and ip (from cpu_init_crit) are still based on 0x0, relocate it to
|
|
PHYS_FLASH. */
|
|
mov r1, ip
|
|
add r1, r1, r6
|
|
mov ip, r1
|
|
|
|
mov r1, lr
|
|
add r1, r1, r6
|
|
mov lr, r1
|
|
|
|
@@ back to arch calling code
|
|
mov pc, lr
|
|
|
|
.ltorg
|
|
|
|
_NS9750_MEM_MODULE_BASE:
|
|
.word NS9750_MEM_MODULE_BASE
|
|
|
|
_MEM_CONFIG_START:
|
|
/* Table of 2 32bit entries. First word is register address offset
|
|
relative to NS9750_MEM_MODULE_BASE, second one is value. They are
|
|
written in order of appearance */
|
|
|
|
@@ Register values taken from [2]
|
|
.word NS9750_MEM_CTRL
|
|
.word NS9750_MEM_CTRL_E
|
|
|
|
.word NS9750_MEM_DYN_REFRESH
|
|
.word (0x6 & NS9750_MEM_DYN_REFRESH_MA)
|
|
|
|
.word NS9750_MEM_DYN_READ_CFG
|
|
.word (0x1 & NS9750_MEM_DYN_READ_CFG_MA)
|
|
|
|
.word NS9750_MEM_DYN_TRP
|
|
.word (0x1 & NS9750_MEM_DYN_TRP_MA)
|
|
|
|
.word NS9750_MEM_DYN_TRAS
|
|
.word (0x4 & NS9750_MEM_DYN_TRAS_MA)
|
|
|
|
.word NS9750_MEM_DYN_TAPR
|
|
.word (0x1 & NS9750_MEM_DYN_TRAS_MA)
|
|
|
|
.word NS9750_MEM_DYN_TDAL
|
|
.word (0x5 & NS9750_MEM_DYN_TDAL_MA)
|
|
|
|
.word NS9750_MEM_DYN_TWR
|
|
.word (0x1 & NS9750_MEM_DYN_TWR_MA)
|
|
|
|
.word NS9750_MEM_DYN_TRC
|
|
.word (0x6 & NS9750_MEM_DYN_TRC_MA)
|
|
|
|
.word NS9750_MEM_DYN_TRFC
|
|
.word (0x6 & NS9750_MEM_DYN_TRFC_MA)
|
|
|
|
.word NS9750_MEM_DYN_TRRD
|
|
.word (0x1 & NS9750_MEM_DYN_TRRD_MA)
|
|
|
|
.word NS9750_MEM_DYN_TMRD
|
|
.word (0x1 & NS9750_MEM_DYN_TMRD_MA)
|
|
|
|
@@ CS 4
|
|
.word NS9750_MEM_DYN_CFG(0)
|
|
.word (NS9750_MEM_DYN_CFG_AM | \
|
|
(0x280 & NS9750_MEM_DYN_CFG_AM_MA))
|
|
|
|
.word NS9750_MEM_DYN_RAS_CAS(0)
|
|
.word ((0x200 & NS9750_MEM_DYN_RAS_CAS_CAS_MA) | \
|
|
(0x03 & NS9750_MEM_DYN_RAS_CAS_RAS_MA))
|
|
|
|
@@ CS 5
|
|
.word NS9750_MEM_DYN_CFG(1)
|
|
.word (NS9750_MEM_DYN_CFG_AM | \
|
|
(0x280 & NS9750_MEM_DYN_CFG_AM_MA))
|
|
|
|
.word NS9750_MEM_DYN_RAS_CAS(1)
|
|
.word ((0x200 & NS9750_MEM_DYN_RAS_CAS_CAS_MA) | \
|
|
(0x03 & NS9750_MEM_DYN_RAS_CAS_RAS_MA))
|
|
|
|
@@ CS 6
|
|
.word NS9750_MEM_DYN_CFG(2)
|
|
.word (NS9750_MEM_DYN_CFG_AM | \
|
|
(0x280 & NS9750_MEM_DYN_CFG_AM_MA))
|
|
|
|
.word NS9750_MEM_DYN_RAS_CAS(2)
|
|
.word ((0x200 & NS9750_MEM_DYN_RAS_CAS_CAS_MA) | \
|
|
(0x03 & NS9750_MEM_DYN_RAS_CAS_RAS_MA))
|
|
|
|
@@ CS 7
|
|
.word NS9750_MEM_DYN_CFG(3)
|
|
.word (NS9750_MEM_DYN_CFG_AM | \
|
|
(0x280 & NS9750_MEM_DYN_CFG_AM_MA))
|
|
|
|
.word NS9750_MEM_DYN_RAS_CAS(3)
|
|
.word ((0x200 & NS9750_MEM_DYN_RAS_CAS_CAS_MA) | \
|
|
(0x03 & NS9750_MEM_DYN_RAS_CAS_RAS_MA))
|
|
|
|
.word NS9750_MEM_DYN_CTRL
|
|
.word (NS9750_MEM_DYN_CTRL_I_PALL | \
|
|
NS9750_MEM_DYN_CTRL_SR | \
|
|
NS9750_MEM_DYN_CTRL_CE )
|
|
|
|
.word NS9750_MEM_DYN_REFRESH
|
|
.word (0x1 & NS9750_MEM_DYN_REFRESH_MA)
|
|
@@ No further register settings after refresh
|
|
_MEM_CONFIG_END:
|
|
|
|
_MEM_MODE_START:
|
|
.word NS9750_MEM_DYN_REFRESH
|
|
.word (0x30 & NS9750_MEM_DYN_REFRESH_MA)
|
|
|
|
.word NS9750_MEM_DYN_CTRL
|
|
.word (NS9750_MEM_DYN_CTRL_I_MODE | \
|
|
NS9750_MEM_DYN_CTRL_SR | \
|
|
NS9750_MEM_DYN_CTRL_CE )
|
|
_MEM_MODE_END:
|
|
|
|
_MEM_ENABLE_START:
|
|
.word NS9750_MEM_DYN_CTRL
|
|
.word (NS9750_MEM_DYN_CTRL_I_NORMAL | \
|
|
NS9750_MEM_DYN_CTRL_SR | \
|
|
NS9750_MEM_DYN_CTRL_CE )
|
|
|
|
@@ CS 4
|
|
.word NS9750_MEM_DYN_CFG(0)
|
|
.word (NS9750_MEM_DYN_CFG_BDMC | \
|
|
NS9750_MEM_DYN_CFG_AM | \
|
|
(0x280 & NS9750_MEM_DYN_CFG_AM_MA))
|
|
|
|
@@ CS 5
|
|
.word NS9750_MEM_DYN_CFG(1)
|
|
.word (NS9750_MEM_DYN_CFG_BDMC | \
|
|
NS9750_MEM_DYN_CFG_AM | \
|
|
(0x280 & NS9750_MEM_DYN_CFG_AM_MA))
|
|
|
|
@@ CS 6
|
|
.word NS9750_MEM_DYN_CFG(2)
|
|
.word (NS9750_MEM_DYN_CFG_BDMC | \
|
|
NS9750_MEM_DYN_CFG_AM | \
|
|
(0x280 & NS9750_MEM_DYN_CFG_AM_MA))
|
|
|
|
@@ CS 7
|
|
.word NS9750_MEM_DYN_CFG(3)
|
|
.word (NS9750_MEM_DYN_CFG_BDMC | \
|
|
NS9750_MEM_DYN_CFG_AM | \
|
|
(0x280 & NS9750_MEM_DYN_CFG_AM_MA))
|
|
_MEM_ENABLE_END:
|
|
|
|
_AHB_MONITOR_START:
|
|
.word NS9750_SYS_AHB_TIMEOUT
|
|
.word 0x01000100 @ @TODO not calculated yet
|
|
|
|
.word NS9750_SYS_AHB_MON
|
|
.word (NS9750_SYS_AHB_MON_BMTC_GEN_IRQ | \
|
|
NS9750_SYS_AHB_MON_BATC_GEN_IRQ)
|
|
_AHB_MONITOR_END:
|
|
|
|
#endif /* CONFIG_INIT_CRITICAL */
|
|
|