upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/arch/x86/lib/pinctrl_ich6.c

215 lines
5.3 KiB

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2016 Google, Inc
*/
#include <common.h>
#include <dm.h>
#include <errno.h>
#include <fdtdec.h>
#include <pch.h>
#include <pci.h>
#include <asm/cpu.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/pci.h>
#include <dm/pinctrl.h>
DECLARE_GLOBAL_DATA_PTR;
#define GPIO_USESEL_OFFSET(x) (x)
#define GPIO_IOSEL_OFFSET(x) (x + 4)
#define GPIO_LVL_OFFSET(x) ((x) ? (x) + 8 : 0xc)
#define GPI_INV 0x2c
#define IOPAD_MODE_MASK 0x7
#define IOPAD_PULL_ASSIGN_SHIFT 7
#define IOPAD_PULL_ASSIGN_MASK (0x3 << IOPAD_PULL_ASSIGN_SHIFT)
#define IOPAD_PULL_STRENGTH_SHIFT 9
#define IOPAD_PULL_STRENGTH_MASK (0x3 << IOPAD_PULL_STRENGTH_SHIFT)
static int ich6_pinctrl_set_value(uint16_t base, unsigned offset, int value)
{
if (value)
setio_32(base, 1UL << offset);
else
clrio_32(base, 1UL << offset);
return 0;
}
static int ich6_pinctrl_set_function(uint16_t base, unsigned offset, int func)
{
if (func)
setio_32(base, 1UL << offset);
else
clrio_32(base, 1UL << offset);
return 0;
}
static int ich6_pinctrl_set_direction(uint16_t base, unsigned offset, int dir)
{
if (!dir)
setio_32(base, 1UL << offset);
else
clrio_32(base, 1UL << offset);
return 0;
}
static int ich6_pinctrl_cfg_pin(s32 gpiobase, s32 iobase, int pin_node)
{
bool is_gpio, invert;
u32 gpio_offset[2];
int pad_offset;
int dir, val;
int ret;
/*
* GPIO node is not mandatory, so we only do the pinmuxing if the
* node exists.
*/
ret = fdtdec_get_int_array(gd->fdt_blob, pin_node, "gpio-offset",
gpio_offset, 2);
if (!ret) {
/* Do we want to force the GPIO mode? */
is_gpio = fdtdec_get_bool(gd->fdt_blob, pin_node, "mode-gpio");
if (is_gpio)
ich6_pinctrl_set_function(GPIO_USESEL_OFFSET(gpiobase) +
gpio_offset[0], gpio_offset[1],
1);
dir = fdtdec_get_int(gd->fdt_blob, pin_node, "direction", -1);
if (dir != -1)
ich6_pinctrl_set_direction(GPIO_IOSEL_OFFSET(gpiobase) +
gpio_offset[0], gpio_offset[1],
dir);
val = fdtdec_get_int(gd->fdt_blob, pin_node, "output-value",
-1);
if (val != -1)
ich6_pinctrl_set_value(GPIO_LVL_OFFSET(gpiobase) +
gpio_offset[0], gpio_offset[1],
val);
invert = fdtdec_get_bool(gd->fdt_blob, pin_node, "invert");
if (invert)
setio_32(gpiobase + GPI_INV, 1 << gpio_offset[1]);
debug("gpio %#x bit %d, is_gpio %d, dir %d, val %d, invert %d\n",
gpio_offset[0], gpio_offset[1], is_gpio, dir, val,
invert);
}
/* if iobase is present, let's configure the pad */
if (iobase != -1) {
ulong iobase_addr;
/*
* The offset for the same pin for the IOBASE and GPIOBASE are
* different, so instead of maintaining a lookup table,
* the device tree should provide directly the correct
* value for both mapping.
*/
pad_offset = fdtdec_get_int(gd->fdt_blob, pin_node,
"pad-offset", -1);
if (pad_offset == -1)
return 0;
/* compute the absolute pad address */
iobase_addr = iobase + pad_offset;
/*
* Do we need to set a specific function mode?
* If someone put also 'mode-gpio', this option will
* be just ignored by the controller
*/
val = fdtdec_get_int(gd->fdt_blob, pin_node, "mode-func", -1);
if (val != -1)
clrsetbits_le32(iobase_addr, IOPAD_MODE_MASK, val);
/* Configure the pull-up/down if needed */
val = fdtdec_get_int(gd->fdt_blob, pin_node, "pull-assign", -1);
if (val != -1)
clrsetbits_le32(iobase_addr,
IOPAD_PULL_ASSIGN_MASK,
val << IOPAD_PULL_ASSIGN_SHIFT);
val = fdtdec_get_int(gd->fdt_blob, pin_node, "pull-strength",
-1);
if (val != -1)
clrsetbits_le32(iobase_addr,
IOPAD_PULL_STRENGTH_MASK,
val << IOPAD_PULL_STRENGTH_SHIFT);
debug("%s: pad cfg [0x%x]: %08x\n", __func__, pad_offset,
readl(iobase_addr));
}
return 0;
}
static int ich6_pinctrl_probe(struct udevice *dev)
{
struct udevice *pch;
int pin_node;
int ret;
u32 gpiobase;
u32 iobase = -1;
debug("%s: start\n", __func__);
ret = uclass_first_device(UCLASS_PCH, &pch);
if (ret)
return ret;
if (!pch)
return -ENODEV;
/*
* Get the memory/io base address to configure every pins.
* IOBASE is used to configure the mode/pads
* GPIOBASE is used to configure the direction and default value
*/
ret = pch_get_gpio_base(pch, &gpiobase);
if (ret) {
debug("%s: invalid GPIOBASE address (%08x)\n", __func__,
gpiobase);
return -EINVAL;
}
/*
* Get the IOBASE, this is not mandatory as this is not
* supported by all the CPU
*/
ret = pch_get_io_base(pch, &iobase);
if (ret && ret != -ENOSYS) {
debug("%s: invalid IOBASE address (%08x)\n", __func__, iobase);
return -EINVAL;
}
for (pin_node = fdt_first_subnode(gd->fdt_blob, dev_of_offset(dev));
pin_node > 0;
pin_node = fdt_next_subnode(gd->fdt_blob, pin_node)) {
/* Configure the pin */
ret = ich6_pinctrl_cfg_pin(gpiobase, iobase, pin_node);
if (ret != 0) {
debug("%s: invalid configuration for the pin %d\n",
__func__, pin_node);
return ret;
}
}
debug("%s: done\n", __func__);
return 0;
}
static const struct udevice_id ich6_pinctrl_match[] = {
{ .compatible = "intel,x86-pinctrl", .data = X86_SYSCON_PINCONF },
{ /* sentinel */ }
};
U_BOOT_DRIVER(ich6_pinctrl) = {
.name = "ich6_pinctrl",
.id = UCLASS_SYSCON,
.of_match = ich6_pinctrl_match,
.probe = ich6_pinctrl_probe,
};