upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/arch/arm/mach-davinci/Kconfig

159 lines
3.0 KiB

if ARCH_DAVINCI
choice
prompt "DaVinci board select"
optional
config TARGET_IPAM390
bool "IPAM390 board"
select MACH_DAVINCI_DA850_EVM
select SOC_DA850
select SUPPORT_SPL
config TARGET_DA850EVM
bool "DA850 EVM board"
select MACH_DAVINCI_DA850_EVM
select SOC_DA850
select SUPPORT_SPL
config TARGET_EA20
bool "EA20 board"
select MACH_DAVINCI_DA850_EVM
select SOC_DA850
select BOARD_LATE_INIT
config TARGET_OMAPL138_LCDK
bool "OMAPL138 LCDK"
select SOC_DA8XX
select SUPPORT_SPL
config TARGET_CALIMAIN
bool "Calimain board"
select SOC_DA850
config TARGET_LEGOEV3
bool "LEGO MINDSTORMS EV3"
select MACH_DAVINCI_DA850_EVM
select SOC_DA850
endchoice
config SYS_SOC
default "davinci"
config DA850_LOWLEVEL
bool "Enable Lowlevel DA850 initialization"
depends on SOC_DA850
config SYS_DA850_PLL_INIT
bool
config SYS_DA850_DDR_INIT
bool
config SOC_DA850
bool
select SOC_DA8XX
config SOC_DA8XX
bool
select SYS_DA850_PLL_INIT if SUPPORT_SPL || DA850_LOWLEVEL
select SYS_DA850_DDR_INIT if SUPPORT_SPL || DA850_LOWLEVEL
config MACH_DAVINCI_DA850_EVM
bool
if SYS_DA850_PLL_INIT
comment "DA850 PLL Initialization Parameters"
config SYS_DV_CLKMODE
int "PLLCTL Clock Mode"
default 0
help
Set PLLCTL Clock Mode bit as External Clock or On Chip oscillator
config SYS_DA850_PLL0_POSTDIV
int "PLLC0 PLL Post-Divider"
default 1
help
Value written to PLLC0 PLL Post-Divider Control Register
config SYS_DA850_PLL0_PLLDIV1
hex "PLLC0 Divider 1"
default 0x8000
help
Value written to PLLC0 Divider 1 register
config SYS_DA850_PLL0_PLLDIV2
hex "PLLC0 Divider 2"
default 0x8001
help
Value written to PLLC0 Divider 2 register
config SYS_DA850_PLL0_PLLDIV3
hex "PLLC0 Divider 3"
default 0x8002
help
Value written to PLLC0 Divider 3 register
config SYS_DA850_PLL0_PLLDIV4
hex "PLLC0 Divider 4"
default 0x8003
help
Value written to PLLC0 Divider 4 register
config SYS_DA850_PLL0_PLLDIV5
hex "PLLC0 Divider 5"
default 0x8002
help
Value written to PLLC0 Divider 5 register
config SYS_DA850_PLL0_PLLDIV6
hex "PLLC0 Divider 6"
default 0x8000
help
Value written to PLLC0 Divider 6 register
config SYS_DA850_PLL0_PLLDIV7
hex "PLLC0 Divider 7"
default 0x8005
help
Value written to PLLC0 Divider 7 register
config SYS_DA850_PLL1_POSTDIV
hex "PLLC1 PLL Post-Divider"
default 1
help
Value written to PLLC1 PLL Post-Divider Control Register
config SYS_DA850_PLL1_PLLDIV1
hex "PLLC1 Divider 2"
default 0x8000
help
Value written to PLLC1 Divider 1 register
config SYS_DA850_PLL1_PLLDIV2
hex "PLLC1 Divider 2"
default 0x8001
help
Value written to PLLC1 Divider 2 register
config SYS_DA850_PLL1_PLLDIV3
hex "PLLC1 Divider 3"
default 0x8002
help
Value written to PLLC1 Divider 3 register
endif
source "board/Barix/ipam390/Kconfig"
source "board/davinci/da8xxevm/Kconfig"
source "board/davinci/ea20/Kconfig"
source "board/omicron/calimain/Kconfig"
source "board/lego/ev3/Kconfig"
config SPL_LDSCRIPT
default "board/$(BOARDDIR)/u-boot-spl-ipam390.lds" if TARGET_IPAM390
default "board/$(BOARDDIR)/u-boot-spl-da850evm.lds"
endif