upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/arch/arm/include/asm/arch-armada100/armada100.h

76 lines
2.5 KiB

/*
* (C) Copyright 2010
* Marvell Semiconductor <www.marvell.com>
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
* Contributor: Mahavir Jain <mjain@marvell.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301 USA
*/
#ifndef _ASM_ARCH_ARMADA100_H
#define _ASM_ARCH_ARMADA100_H
#if defined (CONFIG_ARMADA100)
/* Common APB clock register bit definitions */
#define APBC_APBCLK (1<<0) /* APB Bus Clock Enable */
#define APBC_FNCLK (1<<1) /* Functional Clock Enable */
#define APBC_RST (1<<2) /* Reset Generation */
/* Functional Clock Selection Mask */
#define APBC_FNCLKSEL(x) (((x) & 0xf) << 4)
/* Fast Ethernet Controller Clock register definition */
#define FE_CLK_RST 0x1
#define FE_CLK_ENA 0x8
/* SSP2 Clock Control */
#define SSP2_APBCLK 0x01
#define SSP2_FNCLK 0x02
/* USB Clock/reset control bits */
#define USB_SPH_AXICLK_EN 0x10
#define USB_SPH_AXI_RST 0x02
/* MPMU Clocks */
#define APB2_26M_EN (1 << 20)
#define AP_26M (1 << 4)
/* Register Base Addresses */
#define ARMD1_DRAM_BASE 0xB0000000
#define ARMD1_FEC_BASE 0xC0800000
#define ARMD1_TIMER_BASE 0xD4014000
#define ARMD1_APBC1_BASE 0xD4015000
#define ARMD1_APBC2_BASE 0xD4015800
#define ARMD1_UART1_BASE 0xD4017000
#define ARMD1_UART2_BASE 0xD4018000
#define ARMD1_GPIO_BASE 0xD4019000
#define ARMD1_SSP1_BASE 0xD401B000
#define ARMD1_SSP2_BASE 0xD401C000
#define ARMD1_MFPR_BASE 0xD401E000
#define ARMD1_SSP3_BASE 0xD401F000
#define ARMD1_SSP4_BASE 0xD4020000
#define ARMD1_SSP5_BASE 0xD4021000
#define ARMD1_UART3_BASE 0xD4026000
#define ARMD1_MPMU_BASE 0xD4050000
#define ARMD1_USB_HOST_BASE 0xD4209000
#define ARMD1_APMU_BASE 0xD4282800
#define ARMD1_CPU_BASE 0xD4282C00
#endif /* CONFIG_ARMADA100 */
#endif /* _ASM_ARCH_ARMADA100_H */