upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/common/spl/spl_spi.c

140 lines
3.4 KiB

/*
* Copyright (C) 2011 OMICRON electronics GmbH
*
* based on drivers/mtd/nand/nand_spl_load.c
*
* Copyright (C) 2011
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <spi.h>
#include <spi_flash.h>
#include <errno.h>
#include <spl.h>
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_SPL_OS_BOOT
/*
* Load the kernel, check for a valid header we can parse, and if found load
* the kernel and then device tree.
*/
static int spi_load_image_os(struct spl_image_info *spl_image,
struct spi_flash *flash,
struct image_header *header)
{
int err;
/* Read for a header, parse or error out. */
spi_flash_read(flash, CONFIG_SYS_SPI_KERNEL_OFFS, 0x40,
(void *)header);
if (image_get_magic(header) != IH_MAGIC)
return -1;
err = spl_parse_image_header(spl_image, header);
if (err)
return err;
spi_flash_read(flash, CONFIG_SYS_SPI_KERNEL_OFFS,
spl_image->size, (void *)spl_image->load_addr);
/* Read device tree. */
spi_flash_read(flash, CONFIG_SYS_SPI_ARGS_OFFS,
CONFIG_SYS_SPI_ARGS_SIZE,
(void *)CONFIG_SYS_SPL_ARGS_ADDR);
return 0;
}
#endif
static ulong spl_spi_fit_read(struct spl_load_info *load, ulong sector,
ulong count, void *buf)
{
struct spi_flash *flash = load->dev;
ulong ret;
ret = spi_flash_read(flash, sector, count, buf);
if (!ret)
return count;
else
return 0;
}
/*
* The main entry for SPI booting. It's necessary that SDRAM is already
* configured and available since this code loads the main U-Boot image
* from SPI into SDRAM and starts it from there.
*/
static int spl_spi_load_image(struct spl_image_info *spl_image,
struct spl_boot_device *bootdev)
{
int err = 0;
unsigned payload_offs = CONFIG_SYS_SPI_U_BOOT_OFFS;
struct spi_flash *flash;
struct image_header *header;
/*
* Load U-Boot image from SPI flash into RAM
*/
flash = spi_flash_probe(CONFIG_SF_DEFAULT_BUS,
CONFIG_SF_DEFAULT_CS,
CONFIG_SF_DEFAULT_SPEED,
CONFIG_SF_DEFAULT_MODE);
if (!flash) {
puts("SPI probe failed.\n");
return -ENODEV;
}
/* use CONFIG_SYS_TEXT_BASE as temporary storage area */
header = (struct image_header *)(CONFIG_SYS_TEXT_BASE);
#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
payload_offs = fdtdec_get_config_int(gd->fdt_blob,
"u-boot,spl-payload-offset",
payload_offs);
#endif
#ifdef CONFIG_SPL_OS_BOOT
if (spl_start_uboot() || spi_load_image_os(spl_image, flash, header))
#endif
{
/* Load u-boot, mkimage header is 64 bytes. */
err = spi_flash_read(flash, payload_offs, 0x40,
(void *)header);
if (err) {
debug("%s: Failed to read from SPI flash (err=%d)\n",
__func__, err);
return err;
}
if (IS_ENABLED(CONFIG_SPL_LOAD_FIT) &&
image_get_magic(header) == FDT_MAGIC) {
struct spl_load_info load;
debug("Found FIT\n");
load.dev = flash;
load.priv = NULL;
load.filename = NULL;
load.bl_len = 1;
load.read = spl_spi_fit_read;
err = spl_load_simple_fit(spl_image, &load,
payload_offs,
header);
} else {
err = spl_parse_image_header(spl_image, header);
if (err)
return err;
err = spi_flash_read(flash, payload_offs,
spl_image->size,
(void *)spl_image->load_addr);
}
}
return err;
}
/* Use priorty 1 so that boards can override this */
SPL_LOAD_IMAGE_METHOD("SPI", 1, BOOT_DEVICE_SPI, spl_spi_load_image);