upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
271 lines
6.9 KiB
271 lines
6.9 KiB
/*
|
|
* NAND boot for FSL Integrated Flash Controller, NAND Flash Control Machine
|
|
*
|
|
* Copyright 2011 Freescale Semiconductor, Inc.
|
|
* Author: Dipen Dudhat <dipen.dudhat@freescale.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/fsl_ifc.h>
|
|
#include <linux/mtd/nand.h>
|
|
|
|
static inline int is_blank(uchar *addr, int page_size)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < page_size; i++) {
|
|
if (__raw_readb(&addr[i]) != 0xff)
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* For the SPL, don't worry about uncorrectable errors
|
|
* where the main area is all FFs but shouldn't be.
|
|
*/
|
|
return 1;
|
|
}
|
|
|
|
/* returns nonzero if entire page is blank */
|
|
static inline int check_read_ecc(uchar *buf, u32 *eccstat,
|
|
unsigned int bufnum, int page_size)
|
|
{
|
|
u32 reg = eccstat[bufnum / 4];
|
|
int errors = (reg >> ((3 - bufnum % 4) * 8)) & 15;
|
|
|
|
if (errors == 15) { /* uncorrectable */
|
|
/* Blank pages fail hw ECC checks */
|
|
if (is_blank(buf, page_size))
|
|
return 1;
|
|
|
|
puts("ecc error\n");
|
|
for (;;)
|
|
;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline void nand_wait(uchar *buf, int bufnum, int page_size)
|
|
{
|
|
struct fsl_ifc *ifc = IFC_BASE_ADDR;
|
|
u32 status;
|
|
u32 eccstat[4];
|
|
int bufperpage = page_size / 512;
|
|
int bufnum_end, i;
|
|
|
|
bufnum *= bufperpage;
|
|
bufnum_end = bufnum + bufperpage - 1;
|
|
|
|
do {
|
|
status = in_be32(&ifc->ifc_nand.nand_evter_stat);
|
|
} while (!(status & IFC_NAND_EVTER_STAT_OPC));
|
|
|
|
if (status & IFC_NAND_EVTER_STAT_FTOER) {
|
|
puts("flash time out error\n");
|
|
for (;;)
|
|
;
|
|
}
|
|
|
|
for (i = bufnum / 4; i <= bufnum_end / 4; i++)
|
|
eccstat[i] = in_be32(&ifc->ifc_nand.nand_eccstat[i]);
|
|
|
|
for (i = bufnum; i <= bufnum_end; i++) {
|
|
if (check_read_ecc(buf, eccstat, i, page_size))
|
|
break;
|
|
}
|
|
|
|
out_be32(&ifc->ifc_nand.nand_evter_stat, status);
|
|
}
|
|
|
|
static inline int bad_block(uchar *marker, int port_size)
|
|
{
|
|
if (port_size == 8)
|
|
return __raw_readb(marker) != 0xff;
|
|
else
|
|
return __raw_readw((u16 *)marker) != 0xffff;
|
|
}
|
|
|
|
static void nand_load(unsigned int offs, int uboot_size, uchar *dst)
|
|
{
|
|
struct fsl_ifc *ifc = IFC_BASE_ADDR;
|
|
uchar *buf = (uchar *)CONFIG_SYS_NAND_BASE;
|
|
int page_size;
|
|
int port_size;
|
|
int pages_per_blk;
|
|
int blk_size;
|
|
int bad_marker = 0;
|
|
int bufnum_mask, bufnum;
|
|
|
|
int csor, cspr;
|
|
int pos = 0;
|
|
int j = 0;
|
|
|
|
int sram_addr;
|
|
int pg_no;
|
|
|
|
/* Get NAND Flash configuration */
|
|
csor = CONFIG_SYS_NAND_CSOR;
|
|
cspr = CONFIG_SYS_NAND_CSPR;
|
|
|
|
if (!(csor & CSOR_NAND_ECC_DEC_EN)) {
|
|
/* soft ECC in SPL is unimplemented */
|
|
puts("WARNING: soft ECC not checked in SPL\n");
|
|
} else {
|
|
u32 hwcsor;
|
|
|
|
/* make sure board is configured with ECC on boot */
|
|
hwcsor = in_be32(&ifc->csor_cs[0].csor);
|
|
if (!(hwcsor & CSOR_NAND_ECC_DEC_EN))
|
|
puts("WARNING: ECC not checked in SPL, "
|
|
"check board cfg\n");
|
|
}
|
|
|
|
port_size = (cspr & CSPR_PORT_SIZE_16) ? 16 : 8;
|
|
|
|
if (csor & CSOR_NAND_PGS_4K) {
|
|
page_size = 4096;
|
|
bufnum_mask = 1;
|
|
} else if (csor & CSOR_NAND_PGS_2K) {
|
|
page_size = 2048;
|
|
bufnum_mask = 3;
|
|
} else {
|
|
page_size = 512;
|
|
bufnum_mask = 15;
|
|
|
|
if (port_size == 8)
|
|
bad_marker = 5;
|
|
}
|
|
|
|
pages_per_blk =
|
|
32 << ((csor & CSOR_NAND_PB_MASK) >> CSOR_NAND_PB_SHIFT);
|
|
|
|
blk_size = pages_per_blk * page_size;
|
|
|
|
/* Open Full SRAM mapping for spare are access */
|
|
out_be32(&ifc->ifc_nand.ncfgr, 0x0);
|
|
|
|
/* Clear Boot events */
|
|
out_be32(&ifc->ifc_nand.nand_evter_stat, 0xffffffff);
|
|
|
|
/* Program FIR/FCR for Large/Small page */
|
|
if (page_size > 512) {
|
|
out_be32(&ifc->ifc_nand.nand_fir0,
|
|
(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
|
|
(IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
|
|
(IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
|
|
(IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP3_SHIFT) |
|
|
(IFC_FIR_OP_BTRD << IFC_NAND_FIR0_OP4_SHIFT));
|
|
out_be32(&ifc->ifc_nand.nand_fir1, 0x0);
|
|
|
|
out_be32(&ifc->ifc_nand.nand_fcr0,
|
|
(NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT) |
|
|
(NAND_CMD_READSTART << IFC_NAND_FCR0_CMD1_SHIFT));
|
|
} else {
|
|
out_be32(&ifc->ifc_nand.nand_fir0,
|
|
(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
|
|
(IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
|
|
(IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
|
|
(IFC_FIR_OP_BTRD << IFC_NAND_FIR0_OP3_SHIFT));
|
|
out_be32(&ifc->ifc_nand.nand_fir1, 0x0);
|
|
|
|
out_be32(&ifc->ifc_nand.nand_fcr0,
|
|
NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT);
|
|
}
|
|
|
|
/* Program FBCR = 0 for full page read */
|
|
out_be32(&ifc->ifc_nand.nand_fbcr, 0);
|
|
|
|
/* Read and copy u-boot on SDRAM from NAND device, In parallel
|
|
* check for Bad block if found skip it and read continue to
|
|
* next Block
|
|
*/
|
|
while (pos < uboot_size) {
|
|
int i = 0;
|
|
do {
|
|
pg_no = offs / page_size;
|
|
bufnum = pg_no & bufnum_mask;
|
|
sram_addr = bufnum * page_size * 2;
|
|
|
|
out_be32(&ifc->ifc_nand.row0, pg_no);
|
|
out_be32(&ifc->ifc_nand.col0, 0);
|
|
/* start read */
|
|
out_be32(&ifc->ifc_nand.nandseq_strt,
|
|
IFC_NAND_SEQ_STRT_FIR_STRT);
|
|
|
|
/* wait for read to complete */
|
|
nand_wait(&buf[sram_addr], bufnum, page_size);
|
|
|
|
/*
|
|
* If either of the first two pages are marked bad,
|
|
* continue to the next block.
|
|
*/
|
|
if (i++ < 2 &&
|
|
bad_block(&buf[sram_addr + page_size + bad_marker],
|
|
port_size)) {
|
|
puts("skipping\n");
|
|
offs = (offs + blk_size) & ~(blk_size - 1);
|
|
pos &= ~(blk_size - 1);
|
|
break;
|
|
}
|
|
|
|
for (j = 0; j < page_size; j++)
|
|
dst[pos + j] = __raw_readb(&buf[sram_addr + j]);
|
|
|
|
pos += page_size;
|
|
offs += page_size;
|
|
} while ((offs & (blk_size - 1)) && (pos < uboot_size));
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Main entrypoint for NAND Boot. It's necessary that SDRAM is already
|
|
* configured and available since this code loads the main U-boot image
|
|
* from NAND into SDRAM and starts from there.
|
|
*/
|
|
void nand_boot(void)
|
|
{
|
|
__attribute__((noreturn)) void (*uboot)(void);
|
|
|
|
/*
|
|
* Load U-Boot image from NAND into RAM
|
|
*/
|
|
nand_load(CONFIG_SYS_NAND_U_BOOT_OFFS, CONFIG_SYS_NAND_U_BOOT_SIZE,
|
|
(uchar *)CONFIG_SYS_NAND_U_BOOT_DST);
|
|
|
|
#ifdef CONFIG_NAND_ENV_DST
|
|
nand_load(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
|
|
(uchar *)CONFIG_NAND_ENV_DST);
|
|
|
|
#ifdef CONFIG_ENV_OFFSET_REDUND
|
|
nand_load(CONFIG_ENV_OFFSET_REDUND, CONFIG_ENV_SIZE,
|
|
(uchar *)CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE);
|
|
#endif
|
|
#endif
|
|
|
|
/*
|
|
* Jump to U-Boot image
|
|
*/
|
|
/*
|
|
* Clean d-cache and invalidate i-cache, to
|
|
* make sure that no stale data is executed.
|
|
*/
|
|
flush_cache(CONFIG_SYS_NAND_U_BOOT_DST, CONFIG_SYS_NAND_U_BOOT_SIZE);
|
|
uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
|
|
uboot();
|
|
}
|
|
|