upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
66 lines
1.6 KiB
66 lines
1.6 KiB
# Copyright (C) 2018 EETS GmbH - http://www.eets.ch/
|
|
#
|
|
# SPDX-License-Identifier: GPL-2.0+
|
|
#
|
|
|
|
if TARGET_PDU001
|
|
|
|
config SYS_BOARD
|
|
default "pdu001"
|
|
|
|
config SYS_VENDOR
|
|
default "eets"
|
|
|
|
config SYS_SOC
|
|
default "am33xx"
|
|
|
|
config SYS_CONFIG_NAME
|
|
default "pdu001"
|
|
|
|
config CONS_INDEX
|
|
int "UART used for console"
|
|
range 1 6
|
|
default 4
|
|
help
|
|
The AM335x SoC has a total of 6 UARTs (UART0 to UART5 as referenced
|
|
in documentation, etc) available to it. The best choice for the
|
|
PDU001 is UART3 as it is wired to the header K2; enter 4 here to
|
|
use UART3. UART0 is connected to the EIA-485 transceiver. If you
|
|
really need to use it, you are advised to remove the transceiver U14
|
|
from the board. UART1 is wired to the backplane and therefore
|
|
accessible from there or by the backplane connector K1 of the PDU.
|
|
Any other UART then UART3 (enter 4 here), UART1 (enter 2 here) or
|
|
UART0 (enter 1 here) are not sensible since they are not wired to
|
|
any connector and therefore difficult to access.
|
|
|
|
choice
|
|
prompt "State of Run LED"
|
|
default PDU001_RUN_LED_RED
|
|
help
|
|
The PDU001 has a bi-color (red/green) LED labeled 'Run' which
|
|
can be used to indicate the operating state of the board. By
|
|
default it will be lit red by U-Boot. Later in the start-up
|
|
process it can be changed to green (or heartbeat or anything else)
|
|
by the kernel or some other software.
|
|
|
|
config RUN_LED_RED
|
|
bool
|
|
prompt "Red"
|
|
help
|
|
Lit Run LED red.
|
|
|
|
config RUN_LED_GREEN
|
|
bool
|
|
prompt "Green"
|
|
help
|
|
Lit Run LED green.
|
|
|
|
config RUN_LED_OFF
|
|
bool
|
|
prompt "Off"
|
|
help
|
|
Do not lit Run LED.
|
|
|
|
endchoice
|
|
|
|
endif
|
|
|