upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/arch/arm/include/asm/arch-mx28/sys_proto.h

74 lines
2.3 KiB

/*
* Freescale i.MX28 MX28 specific functions
*
* Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
* on behalf of DENX Software Engineering GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#ifndef __MX28_H__
#define __MX28_H__
int mx28_reset_block(struct mx28_register_32 *reg);
int mx28_wait_mask_set(struct mx28_register_32 *reg,
uint32_t mask,
int timeout);
int mx28_wait_mask_clr(struct mx28_register_32 *reg,
uint32_t mask,
int timeout);
int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int));
#ifdef CONFIG_SPL_BUILD
#include <asm/arch/iomux-mx28.h>
void mx28_common_spl_init(const iomux_cfg_t *iomux_setup,
const unsigned int iomux_size);
#endif
struct mx28_pair {
uint8_t boot_pads;
uint8_t boot_mask;
const char *mode;
};
static const struct mx28_pair mx28_boot_modes[] = {
{ 0x00, 0x0f, "USB #0" },
{ 0x01, 0x1f, "I2C #0, master, 3V3" },
{ 0x11, 0x1f, "I2C #0, master, 1V8" },
{ 0x02, 0x1f, "SSP SPI #2, master, 3V3 NOR" },
{ 0x12, 0x1f, "SSP SPI #2, master, 1V8 NOR" },
{ 0x03, 0x1f, "SSP SPI #3, master, 3V3 NOR" },
{ 0x13, 0x1f, "SSP SPI #3, master, 1V8 NOR" },
{ 0x04, 0x1f, "NAND, 3V3" },
{ 0x14, 0x1f, "NAND, 1V8" },
{ 0x08, 0x1f, "SSP SPI #3, master, 3V3 EEPROM" },
{ 0x18, 0x1f, "SSP SPI #3, master, 1V8 EEPROM" },
{ 0x09, 0x1f, "SSP SD/MMC #0, 3V3" },
{ 0x19, 0x1f, "SSP SD/MMC #0, 1V8" },
{ 0x0a, 0x1f, "SSP SD/MMC #1, 3V3" },
{ 0x1a, 0x1f, "SSP SD/MMC #1, 1V8" },
{ 0x00, 0x00, "Reserved/Unknown/Wrong" },
};
struct mx28_spl_data {
uint8_t boot_mode_idx;
uint32_t mem_dram_size;
};
int mx28_dram_init(void);
#endif /* __MX28_H__ */