upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
367 lines
8.9 KiB
367 lines
8.9 KiB
/*
|
|
* (C) Copyright 2008
|
|
* Texas Instruments, <www.ti.com>
|
|
*
|
|
* Author :
|
|
* Manikandan Pillai <mani.pillai@ti.com>
|
|
*
|
|
* Derived from Beagle Board and 3430 SDP code by
|
|
* Richard Woodruff <r-woodruff2@ti.com>
|
|
* Syed Mohammed Khasim <khasim@ti.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/mem.h> /* get mem tables */
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <i2c.h>
|
|
|
|
extern omap3_sysinfo sysinfo;
|
|
static struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
|
|
|
|
#ifdef CONFIG_DISPLAY_CPUINFO
|
|
static char *rev_s[CPU_3XX_MAX_REV] = {
|
|
"1.0",
|
|
"2.0",
|
|
"2.1",
|
|
"3.0",
|
|
"3.1",
|
|
"UNKNOWN",
|
|
"UNKNOWN",
|
|
"3.1.2"};
|
|
|
|
/* this is the revision table for 37xx CPUs */
|
|
static char *rev_s_37xx[CPU_37XX_MAX_REV] = {
|
|
"1.0",
|
|
"1.1",
|
|
"1.2"};
|
|
#endif /* CONFIG_DISPLAY_CPUINFO */
|
|
|
|
/*****************************************************************
|
|
* dieid_num_r(void) - read and set die ID
|
|
*****************************************************************/
|
|
void dieid_num_r(void)
|
|
{
|
|
struct ctrl_id *id_base = (struct ctrl_id *)OMAP34XX_ID_L4_IO_BASE;
|
|
char *uid_s, die_id[34];
|
|
u32 id[4];
|
|
|
|
memset(die_id, 0, sizeof(die_id));
|
|
|
|
uid_s = getenv("dieid#");
|
|
|
|
if (uid_s == NULL) {
|
|
id[3] = readl(&id_base->die_id_0);
|
|
id[2] = readl(&id_base->die_id_1);
|
|
id[1] = readl(&id_base->die_id_2);
|
|
id[0] = readl(&id_base->die_id_3);
|
|
sprintf(die_id, "%08x%08x%08x%08x", id[0], id[1], id[2], id[3]);
|
|
setenv("dieid#", die_id);
|
|
uid_s = die_id;
|
|
}
|
|
|
|
printf("Die ID #%s\n", uid_s);
|
|
}
|
|
|
|
/******************************************
|
|
* get_cpu_type(void) - extract cpu info
|
|
******************************************/
|
|
u32 get_cpu_type(void)
|
|
{
|
|
return readl(&ctrl_base->ctrl_omap_stat);
|
|
}
|
|
|
|
/******************************************
|
|
* get_cpu_id(void) - extract cpu id
|
|
* returns 0 for ES1.0, cpuid otherwise
|
|
******************************************/
|
|
u32 get_cpu_id(void)
|
|
{
|
|
struct ctrl_id *id_base;
|
|
u32 cpuid = 0;
|
|
|
|
/*
|
|
* On ES1.0 the IDCODE register is not exposed on L4
|
|
* so using CPU ID to differentiate between ES1.0 and > ES1.0.
|
|
*/
|
|
__asm__ __volatile__("mrc p15, 0, %0, c0, c0, 0":"=r"(cpuid));
|
|
if ((cpuid & 0xf) == 0x0) {
|
|
return 0;
|
|
} else {
|
|
/* Decode the IDs on > ES1.0 */
|
|
id_base = (struct ctrl_id *) OMAP34XX_ID_L4_IO_BASE;
|
|
|
|
cpuid = readl(&id_base->idcode);
|
|
}
|
|
|
|
return cpuid;
|
|
}
|
|
|
|
/******************************************
|
|
* get_cpu_family(void) - extract cpu info
|
|
******************************************/
|
|
u32 get_cpu_family(void)
|
|
{
|
|
u16 hawkeye;
|
|
u32 cpu_family;
|
|
u32 cpuid = get_cpu_id();
|
|
|
|
if (cpuid == 0)
|
|
return CPU_OMAP34XX;
|
|
|
|
hawkeye = (cpuid >> HAWKEYE_SHIFT) & 0xffff;
|
|
switch (hawkeye) {
|
|
case HAWKEYE_OMAP34XX:
|
|
cpu_family = CPU_OMAP34XX;
|
|
break;
|
|
case HAWKEYE_AM35XX:
|
|
cpu_family = CPU_AM35XX;
|
|
break;
|
|
case HAWKEYE_OMAP36XX:
|
|
cpu_family = CPU_OMAP36XX;
|
|
break;
|
|
default:
|
|
cpu_family = CPU_OMAP34XX;
|
|
}
|
|
|
|
return cpu_family;
|
|
}
|
|
|
|
/******************************************
|
|
* get_cpu_rev(void) - extract version info
|
|
******************************************/
|
|
u32 get_cpu_rev(void)
|
|
{
|
|
u32 cpuid = get_cpu_id();
|
|
|
|
if (cpuid == 0)
|
|
return CPU_3XX_ES10;
|
|
else
|
|
return (cpuid >> CPU_3XX_ID_SHIFT) & 0xf;
|
|
}
|
|
|
|
/*****************************************************************
|
|
* get_sku_id(void) - read sku_id to get info on max clock rate
|
|
*****************************************************************/
|
|
u32 get_sku_id(void)
|
|
{
|
|
struct ctrl_id *id_base = (struct ctrl_id *)OMAP34XX_ID_L4_IO_BASE;
|
|
return readl(&id_base->sku_id) & SKUID_CLK_MASK;
|
|
}
|
|
|
|
/***************************************************************************
|
|
* get_gpmc0_base() - Return current address hardware will be
|
|
* fetching from. The below effectively gives what is correct, its a bit
|
|
* mis-leading compared to the TRM. For the most general case the mask
|
|
* needs to be also taken into account this does work in practice.
|
|
* - for u-boot we currently map:
|
|
* -- 0 to nothing,
|
|
* -- 4 to flash
|
|
* -- 8 to enent
|
|
* -- c to wifi
|
|
****************************************************************************/
|
|
u32 get_gpmc0_base(void)
|
|
{
|
|
u32 b;
|
|
|
|
b = readl(&gpmc_cfg->cs[0].config7);
|
|
b &= 0x1F; /* keep base [5:0] */
|
|
b = b << 24; /* ret 0x0b000000 */
|
|
return b;
|
|
}
|
|
|
|
/*******************************************************************
|
|
* get_gpmc0_width() - See if bus is in x8 or x16 (mainly for nand)
|
|
*******************************************************************/
|
|
u32 get_gpmc0_width(void)
|
|
{
|
|
return WIDTH_16BIT;
|
|
}
|
|
|
|
/*************************************************************************
|
|
* get_board_rev() - setup to pass kernel board revision information
|
|
* returns:(bit[0-3] sub version, higher bit[7-4] is higher version)
|
|
*************************************************************************/
|
|
u32 get_board_rev(void)
|
|
{
|
|
return 0x20;
|
|
}
|
|
|
|
/********************************************************
|
|
* get_base(); get upper addr of current execution
|
|
*******************************************************/
|
|
u32 get_base(void)
|
|
{
|
|
u32 val;
|
|
|
|
__asm__ __volatile__("mov %0, pc \n":"=r"(val)::"memory");
|
|
val &= 0xF0000000;
|
|
val >>= 28;
|
|
return val;
|
|
}
|
|
|
|
/********************************************************
|
|
* is_running_in_flash() - tell if currently running in
|
|
* FLASH.
|
|
*******************************************************/
|
|
u32 is_running_in_flash(void)
|
|
{
|
|
if (get_base() < 4)
|
|
return 1; /* in FLASH */
|
|
|
|
return 0; /* running in SRAM or SDRAM */
|
|
}
|
|
|
|
/********************************************************
|
|
* is_running_in_sram() - tell if currently running in
|
|
* SRAM.
|
|
*******************************************************/
|
|
u32 is_running_in_sram(void)
|
|
{
|
|
if (get_base() == 4)
|
|
return 1; /* in SRAM */
|
|
|
|
return 0; /* running in FLASH or SDRAM */
|
|
}
|
|
|
|
/********************************************************
|
|
* is_running_in_sdram() - tell if currently running in
|
|
* SDRAM.
|
|
*******************************************************/
|
|
u32 is_running_in_sdram(void)
|
|
{
|
|
if (get_base() > 4)
|
|
return 1; /* in SDRAM */
|
|
|
|
return 0; /* running in SRAM or FLASH */
|
|
}
|
|
|
|
/***************************************************************
|
|
* get_boot_type() - Is this an XIP type device or a stream one
|
|
* bits 4-0 specify type. Bit 5 says mem/perif
|
|
***************************************************************/
|
|
u32 get_boot_type(void)
|
|
{
|
|
return (readl(&ctrl_base->status) & SYSBOOT_MASK);
|
|
}
|
|
|
|
/*************************************************************
|
|
* get_device_type(): tell if GP/HS/EMU/TST
|
|
*************************************************************/
|
|
u32 get_device_type(void)
|
|
{
|
|
return ((readl(&ctrl_base->status) & (DEVICE_MASK)) >> 8);
|
|
}
|
|
|
|
#ifdef CONFIG_DISPLAY_CPUINFO
|
|
/**
|
|
* Print CPU information
|
|
*/
|
|
int print_cpuinfo (void)
|
|
{
|
|
char *cpu_family_s, *cpu_s, *sec_s, *max_clk;
|
|
|
|
switch (get_cpu_family()) {
|
|
case CPU_OMAP34XX:
|
|
cpu_family_s = "OMAP";
|
|
switch (get_cpu_type()) {
|
|
case OMAP3503:
|
|
cpu_s = "3503";
|
|
break;
|
|
case OMAP3515:
|
|
cpu_s = "3515";
|
|
break;
|
|
case OMAP3525:
|
|
cpu_s = "3525";
|
|
break;
|
|
case OMAP3530:
|
|
cpu_s = "3530";
|
|
break;
|
|
default:
|
|
cpu_s = "35XX";
|
|
break;
|
|
}
|
|
if ((get_cpu_rev() >= CPU_3XX_ES31) &&
|
|
(get_sku_id() == SKUID_CLK_720MHZ))
|
|
max_clk = "720 mHz";
|
|
else
|
|
max_clk = "600 mHz";
|
|
|
|
break;
|
|
case CPU_AM35XX:
|
|
cpu_family_s = "AM";
|
|
switch (get_cpu_type()) {
|
|
case AM3505:
|
|
cpu_s = "3505";
|
|
break;
|
|
case AM3517:
|
|
cpu_s = "3517";
|
|
break;
|
|
default:
|
|
cpu_s = "35XX";
|
|
break;
|
|
}
|
|
max_clk = "600 Mhz";
|
|
break;
|
|
case CPU_OMAP36XX:
|
|
cpu_family_s = "OMAP";
|
|
switch (get_cpu_type()) {
|
|
case OMAP3730:
|
|
cpu_s = "3630/3730";
|
|
break;
|
|
default:
|
|
cpu_s = "36XX/37XX";
|
|
break;
|
|
}
|
|
max_clk = "1 Ghz";
|
|
break;
|
|
default:
|
|
cpu_family_s = "OMAP";
|
|
cpu_s = "35XX";
|
|
max_clk = "600 Mhz";
|
|
}
|
|
|
|
switch (get_device_type()) {
|
|
case TST_DEVICE:
|
|
sec_s = "TST";
|
|
break;
|
|
case EMU_DEVICE:
|
|
sec_s = "EMU";
|
|
break;
|
|
case HS_DEVICE:
|
|
sec_s = "HS";
|
|
break;
|
|
case GP_DEVICE:
|
|
sec_s = "GP";
|
|
break;
|
|
default:
|
|
sec_s = "?";
|
|
}
|
|
|
|
if (CPU_OMAP36XX == get_cpu_family())
|
|
printf("%s%s-%s ES%s, CPU-OPP2, L3-165MHz, Max CPU Clock %s\n",
|
|
cpu_family_s, cpu_s, sec_s,
|
|
rev_s_37xx[get_cpu_rev()], max_clk);
|
|
else
|
|
printf("%s%s-%s ES%s, CPU-OPP2, L3-165MHz, Max CPU Clock %s\n",
|
|
cpu_family_s, cpu_s, sec_s,
|
|
rev_s[get_cpu_rev()], max_clk);
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_DISPLAY_CPUINFO */
|
|
|