upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
343 lines
8.5 KiB
343 lines
8.5 KiB
/*
|
|
* NVIDIA Tegra SPI-SLINK controller
|
|
*
|
|
* Copyright (c) 2010-2013 NVIDIA Corporation
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This software is licensed under the terms of the GNU General Public
|
|
* License version 2, as published by the Free Software Foundation, and
|
|
* may be copied, distributed, and modified under those terms.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <malloc.h>
|
|
#include <asm/io.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch-tegra/clk_rst.h>
|
|
#include <asm/arch-tegra/tegra_slink.h>
|
|
#include <spi.h>
|
|
#include <fdtdec.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
struct tegra_spi_ctrl {
|
|
struct slink_tegra *regs;
|
|
unsigned int freq;
|
|
unsigned int mode;
|
|
int periph_id;
|
|
int valid;
|
|
};
|
|
|
|
struct tegra_spi_slave {
|
|
struct spi_slave slave;
|
|
struct tegra_spi_ctrl *ctrl;
|
|
};
|
|
|
|
static struct tegra_spi_ctrl spi_ctrls[CONFIG_TEGRA_SLINK_CTRLS];
|
|
|
|
static inline struct tegra_spi_slave *to_tegra_spi(struct spi_slave *slave)
|
|
{
|
|
return container_of(slave, struct tegra_spi_slave, slave);
|
|
}
|
|
|
|
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
|
|
{
|
|
if (bus >= CONFIG_TEGRA_SLINK_CTRLS || cs > 3 || !spi_ctrls[bus].valid)
|
|
return 0;
|
|
else
|
|
return 1;
|
|
}
|
|
|
|
struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
|
|
unsigned int max_hz, unsigned int mode)
|
|
{
|
|
struct tegra_spi_slave *spi;
|
|
|
|
debug("%s: bus: %u, cs: %u, max_hz: %u, mode: %u\n", __func__,
|
|
bus, cs, max_hz, mode);
|
|
|
|
if (!spi_cs_is_valid(bus, cs)) {
|
|
printf("SPI error: unsupported bus %d / chip select %d\n",
|
|
bus, cs);
|
|
return NULL;
|
|
}
|
|
|
|
if (max_hz > TEGRA_SPI_MAX_FREQ) {
|
|
printf("SPI error: unsupported frequency %d Hz. Max frequency"
|
|
" is %d Hz\n", max_hz, TEGRA_SPI_MAX_FREQ);
|
|
return NULL;
|
|
}
|
|
|
|
spi = malloc(sizeof(struct tegra_spi_slave));
|
|
if (!spi) {
|
|
printf("SPI error: malloc of SPI structure failed\n");
|
|
return NULL;
|
|
}
|
|
spi->slave.bus = bus;
|
|
spi->slave.cs = cs;
|
|
spi->ctrl = &spi_ctrls[bus];
|
|
if (!spi->ctrl) {
|
|
printf("SPI error: could not find controller for bus %d\n",
|
|
bus);
|
|
return NULL;
|
|
}
|
|
|
|
if (max_hz < spi->ctrl->freq) {
|
|
debug("%s: limiting frequency from %u to %u\n", __func__,
|
|
spi->ctrl->freq, max_hz);
|
|
spi->ctrl->freq = max_hz;
|
|
}
|
|
spi->ctrl->mode = mode;
|
|
|
|
return &spi->slave;
|
|
}
|
|
|
|
void spi_free_slave(struct spi_slave *slave)
|
|
{
|
|
struct tegra_spi_slave *spi = to_tegra_spi(slave);
|
|
|
|
free(spi);
|
|
}
|
|
|
|
void spi_init(void)
|
|
{
|
|
struct tegra_spi_ctrl *ctrl;
|
|
int i;
|
|
#ifdef CONFIG_OF_CONTROL
|
|
int node = 0;
|
|
int count;
|
|
int node_list[CONFIG_TEGRA_SLINK_CTRLS];
|
|
|
|
count = fdtdec_find_aliases_for_id(gd->fdt_blob, "spi",
|
|
COMPAT_NVIDIA_TEGRA20_SLINK,
|
|
node_list,
|
|
CONFIG_TEGRA_SLINK_CTRLS);
|
|
for (i = 0; i < count; i++) {
|
|
ctrl = &spi_ctrls[i];
|
|
node = node_list[i];
|
|
|
|
ctrl->regs = (struct slink_tegra *)fdtdec_get_addr(gd->fdt_blob,
|
|
node, "reg");
|
|
if ((fdt_addr_t)ctrl->regs == FDT_ADDR_T_NONE) {
|
|
debug("%s: no slink register found\n", __func__);
|
|
continue;
|
|
}
|
|
ctrl->freq = fdtdec_get_int(gd->fdt_blob, node,
|
|
"spi-max-frequency", 0);
|
|
if (!ctrl->freq) {
|
|
debug("%s: no slink max frequency found\n", __func__);
|
|
continue;
|
|
}
|
|
|
|
ctrl->periph_id = clock_decode_periph_id(gd->fdt_blob, node);
|
|
if (ctrl->periph_id == PERIPH_ID_NONE) {
|
|
debug("%s: could not decode periph id\n", __func__);
|
|
continue;
|
|
}
|
|
ctrl->valid = 1;
|
|
|
|
debug("%s: found controller at %p, freq = %u, periph_id = %d\n",
|
|
__func__, ctrl->regs, ctrl->freq, ctrl->periph_id);
|
|
}
|
|
#else
|
|
for (i = 0; i < CONFIG_TEGRA_SLINK_CTRLS; i++) {
|
|
ctrl = &spi_ctrls[i];
|
|
u32 base_regs[] = {
|
|
NV_PA_SLINK1_BASE,
|
|
NV_PA_SLINK2_BASE,
|
|
NV_PA_SLINK3_BASE,
|
|
NV_PA_SLINK4_BASE,
|
|
NV_PA_SLINK5_BASE,
|
|
NV_PA_SLINK6_BASE,
|
|
};
|
|
int periph_ids[] = {
|
|
PERIPH_ID_SBC1,
|
|
PERIPH_ID_SBC2,
|
|
PERIPH_ID_SBC3,
|
|
PERIPH_ID_SBC4,
|
|
PERIPH_ID_SBC5,
|
|
PERIPH_ID_SBC6,
|
|
};
|
|
ctrl->regs = (struct slink_tegra *)base_regs[i];
|
|
ctrl->freq = TEGRA_SPI_MAX_FREQ;
|
|
ctrl->periph_id = periph_ids[i];
|
|
ctrl->valid = 1;
|
|
|
|
debug("%s: found controller at %p, freq = %u, periph_id = %d\n",
|
|
__func__, ctrl->regs, ctrl->freq, ctrl->periph_id);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
int spi_claim_bus(struct spi_slave *slave)
|
|
{
|
|
struct tegra_spi_slave *spi = to_tegra_spi(slave);
|
|
struct slink_tegra *regs = spi->ctrl->regs;
|
|
u32 reg;
|
|
|
|
/* Change SPI clock to correct frequency, PLLP_OUT0 source */
|
|
clock_start_periph_pll(spi->ctrl->periph_id, CLOCK_ID_PERIPH,
|
|
spi->ctrl->freq);
|
|
|
|
/* Clear stale status here */
|
|
reg = SLINK_STAT_RDY | SLINK_STAT_RXF_FLUSH | SLINK_STAT_TXF_FLUSH | \
|
|
SLINK_STAT_RXF_UNR | SLINK_STAT_TXF_OVF;
|
|
writel(reg, ®s->status);
|
|
debug("%s: STATUS = %08x\n", __func__, readl(®s->status));
|
|
|
|
/* Set master mode and sw controlled CS */
|
|
reg = readl(®s->command);
|
|
reg |= SLINK_CMD_M_S | SLINK_CMD_CS_SOFT;
|
|
writel(reg, ®s->command);
|
|
debug("%s: COMMAND = %08x\n", __func__, readl(®s->command));
|
|
|
|
return 0;
|
|
}
|
|
|
|
void spi_release_bus(struct spi_slave *slave)
|
|
{
|
|
}
|
|
|
|
void spi_cs_activate(struct spi_slave *slave)
|
|
{
|
|
struct tegra_spi_slave *spi = to_tegra_spi(slave);
|
|
struct slink_tegra *regs = spi->ctrl->regs;
|
|
|
|
/* CS is negated on Tegra, so drive a 1 to get a 0 */
|
|
setbits_le32(®s->command, SLINK_CMD_CS_VAL);
|
|
}
|
|
|
|
void spi_cs_deactivate(struct spi_slave *slave)
|
|
{
|
|
struct tegra_spi_slave *spi = to_tegra_spi(slave);
|
|
struct slink_tegra *regs = spi->ctrl->regs;
|
|
|
|
/* CS is negated on Tegra, so drive a 0 to get a 1 */
|
|
clrbits_le32(®s->command, SLINK_CMD_CS_VAL);
|
|
}
|
|
|
|
int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
|
|
const void *data_out, void *data_in, unsigned long flags)
|
|
{
|
|
struct tegra_spi_slave *spi = to_tegra_spi(slave);
|
|
struct slink_tegra *regs = spi->ctrl->regs;
|
|
u32 reg, tmpdout, tmpdin = 0;
|
|
const u8 *dout = data_out;
|
|
u8 *din = data_in;
|
|
int num_bytes;
|
|
int ret;
|
|
|
|
debug("%s: slave %u:%u dout %p din %p bitlen %u\n",
|
|
__func__, slave->bus, slave->cs, dout, din, bitlen);
|
|
if (bitlen % 8)
|
|
return -1;
|
|
num_bytes = bitlen / 8;
|
|
|
|
ret = 0;
|
|
|
|
reg = readl(®s->status);
|
|
writel(reg, ®s->status); /* Clear all SPI events via R/W */
|
|
debug("%s entry: STATUS = %08x\n", __func__, reg);
|
|
|
|
reg = readl(®s->status2);
|
|
writel(reg, ®s->status2); /* Clear all STATUS2 events via R/W */
|
|
debug("%s entry: STATUS2 = %08x\n", __func__, reg);
|
|
|
|
debug("%s entry: COMMAND = %08x\n", __func__, readl(®s->command));
|
|
|
|
clrsetbits_le32(®s->command2, SLINK_CMD2_SS_EN_MASK,
|
|
SLINK_CMD2_TXEN | SLINK_CMD2_RXEN |
|
|
(slave->cs << SLINK_CMD2_SS_EN_SHIFT));
|
|
debug("%s entry: COMMAND2 = %08x\n", __func__, readl(®s->command2));
|
|
|
|
if (flags & SPI_XFER_BEGIN)
|
|
spi_cs_activate(slave);
|
|
|
|
/* handle data in 32-bit chunks */
|
|
while (num_bytes > 0) {
|
|
int bytes;
|
|
int is_read = 0;
|
|
int tm, i;
|
|
|
|
tmpdout = 0;
|
|
bytes = (num_bytes > 4) ? 4 : num_bytes;
|
|
|
|
if (dout != NULL) {
|
|
for (i = 0; i < bytes; ++i)
|
|
tmpdout = (tmpdout << 8) | dout[i];
|
|
dout += bytes;
|
|
}
|
|
|
|
num_bytes -= bytes;
|
|
|
|
clrsetbits_le32(®s->command, SLINK_CMD_BIT_LENGTH_MASK,
|
|
bytes * 8 - 1);
|
|
writel(tmpdout, ®s->tx_fifo);
|
|
setbits_le32(®s->command, SLINK_CMD_GO);
|
|
|
|
/*
|
|
* Wait for SPI transmit FIFO to empty, or to time out.
|
|
* The RX FIFO status will be read and cleared last
|
|
*/
|
|
for (tm = 0, is_read = 0; tm < SPI_TIMEOUT; ++tm) {
|
|
u32 status;
|
|
|
|
status = readl(®s->status);
|
|
|
|
/* We can exit when we've had both RX and TX activity */
|
|
if (is_read && (status & SLINK_STAT_TXF_EMPTY))
|
|
break;
|
|
|
|
if ((status & (SLINK_STAT_BSY | SLINK_STAT_RDY)) !=
|
|
SLINK_STAT_RDY)
|
|
tm++;
|
|
|
|
else if (!(status & SLINK_STAT_RXF_EMPTY)) {
|
|
tmpdin = readl(®s->rx_fifo);
|
|
is_read = 1;
|
|
|
|
/* swap bytes read in */
|
|
if (din != NULL) {
|
|
for (i = bytes - 1; i >= 0; --i) {
|
|
din[i] = tmpdin & 0xff;
|
|
tmpdin >>= 8;
|
|
}
|
|
din += bytes;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (tm >= SPI_TIMEOUT)
|
|
ret = tm;
|
|
|
|
/* clear ACK RDY, etc. bits */
|
|
writel(readl(®s->status), ®s->status);
|
|
}
|
|
|
|
if (flags & SPI_XFER_END)
|
|
spi_cs_deactivate(slave);
|
|
|
|
debug("%s: transfer ended. Value=%08x, status = %08x\n",
|
|
__func__, tmpdin, readl(®s->status));
|
|
|
|
if (ret) {
|
|
printf("%s: timeout during SPI transfer, tm %d\n",
|
|
__func__, ret);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|