upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
138 lines
4.2 KiB
138 lines
4.2 KiB
/*
|
|
* Xilinx SPI driver
|
|
*
|
|
* XPS/AXI bus interface
|
|
*
|
|
* based on bfin_spi.c, by way of altera_spi.c
|
|
* Copyright (c) 2005-2008 Analog Devices Inc.
|
|
* Copyright (c) 2010 Thomas Chou <thomas@wytron.com.tw>
|
|
* Copyright (c) 2010 Graeme Smecher <graeme.smecher@mail.mcgill.ca>
|
|
* Copyright (c) 2012 Stephan Linz <linz@li-pro.net>
|
|
*
|
|
* Licensed under the GPL-2 or later.
|
|
*
|
|
* [0]: http://www.xilinx.com/support/documentation
|
|
*
|
|
* [S]: [0]/ip_documentation/xps_spi.pdf
|
|
* [0]/ip_documentation/axi_spi_ds742.pdf
|
|
*/
|
|
#ifndef _XILINX_SPI_
|
|
#define _XILINX_SPI_
|
|
|
|
#include <asm/types.h>
|
|
#include <asm/io.h>
|
|
|
|
/*
|
|
* Xilinx SPI Register Definition
|
|
*
|
|
* [1]: [0]/ip_documentation/xps_spi.pdf
|
|
* page 8, Register Descriptions
|
|
* [2]: [0]/ip_documentation/axi_spi_ds742.pdf
|
|
* page 7, Register Overview Table
|
|
*/
|
|
struct xilinx_spi_reg {
|
|
u32 __space0__[7];
|
|
u32 dgier; /* Device Global Interrupt Enable Register (DGIER) */
|
|
u32 ipisr; /* IP Interrupt Status Register (IPISR) */
|
|
u32 __space1__;
|
|
u32 ipier; /* IP Interrupt Enable Register (IPIER) */
|
|
u32 __space2__[5];
|
|
u32 srr; /* Softare Reset Register (SRR) */
|
|
u32 __space3__[7];
|
|
u32 spicr; /* SPI Control Register (SPICR) */
|
|
u32 spisr; /* SPI Status Register (SPISR) */
|
|
u32 spidtr; /* SPI Data Transmit Register (SPIDTR) */
|
|
u32 spidrr; /* SPI Data Receive Register (SPIDRR) */
|
|
u32 spissr; /* SPI Slave Select Register (SPISSR) */
|
|
u32 spitfor; /* SPI Transmit FIFO Occupancy Register (SPITFOR) */
|
|
u32 spirfor; /* SPI Receive FIFO Occupancy Register (SPIRFOR) */
|
|
};
|
|
|
|
/* Device Global Interrupt Enable Register (dgier), [1] p15, [2] p15 */
|
|
#define DGIER_GIE (1 << 31)
|
|
|
|
/* IP Interrupt Status Register (ipisr), [1] p15, [2] p15 */
|
|
#define IPISR_DRR_NOT_EMPTY (1 << 8)
|
|
#define IPISR_SLAVE_SELECT (1 << 7)
|
|
#define IPISR_TXF_HALF_EMPTY (1 << 6)
|
|
#define IPISR_DRR_OVERRUN (1 << 5)
|
|
#define IPISR_DRR_FULL (1 << 4)
|
|
#define IPISR_DTR_UNDERRUN (1 << 3)
|
|
#define IPISR_DTR_EMPTY (1 << 2)
|
|
#define IPISR_SLAVE_MODF (1 << 1)
|
|
#define IPISR_MODF (1 << 0)
|
|
|
|
/* IP Interrupt Enable Register (ipier), [1] p17, [2] p18 */
|
|
#define IPIER_DRR_NOT_EMPTY (1 << 8)
|
|
#define IPIER_SLAVE_SELECT (1 << 7)
|
|
#define IPIER_TXF_HALF_EMPTY (1 << 6)
|
|
#define IPIER_DRR_OVERRUN (1 << 5)
|
|
#define IPIER_DRR_FULL (1 << 4)
|
|
#define IPIER_DTR_UNDERRUN (1 << 3)
|
|
#define IPIER_DTR_EMPTY (1 << 2)
|
|
#define IPIER_SLAVE_MODF (1 << 1)
|
|
#define IPIER_MODF (1 << 0)
|
|
|
|
/* Softare Reset Register (srr), [1] p9, [2] p8 */
|
|
#define SRR_RESET_CODE 0x0000000A
|
|
|
|
/* SPI Control Register (spicr), [1] p9, [2] p8 */
|
|
#define SPICR_LSB_FIRST (1 << 9)
|
|
#define SPICR_MASTER_INHIBIT (1 << 8)
|
|
#define SPICR_MANUAL_SS (1 << 7)
|
|
#define SPICR_RXFIFO_RESEST (1 << 6)
|
|
#define SPICR_TXFIFO_RESEST (1 << 5)
|
|
#define SPICR_CPHA (1 << 4)
|
|
#define SPICR_CPOL (1 << 3)
|
|
#define SPICR_MASTER_MODE (1 << 2)
|
|
#define SPICR_SPE (1 << 1)
|
|
#define SPICR_LOOP (1 << 0)
|
|
|
|
/* SPI Status Register (spisr), [1] p11, [2] p10 */
|
|
#define SPISR_SLAVE_MODE_SELECT (1 << 5)
|
|
#define SPISR_MODF (1 << 4)
|
|
#define SPISR_TX_FULL (1 << 3)
|
|
#define SPISR_TX_EMPTY (1 << 2)
|
|
#define SPISR_RX_FULL (1 << 1)
|
|
#define SPISR_RX_EMPTY (1 << 0)
|
|
|
|
/* SPI Data Transmit Register (spidtr), [1] p12, [2] p12 */
|
|
#define SPIDTR_8BIT_MASK (0xff << 0)
|
|
#define SPIDTR_16BIT_MASK (0xffff << 0)
|
|
#define SPIDTR_32BIT_MASK (0xffffffff << 0)
|
|
|
|
/* SPI Data Receive Register (spidrr), [1] p12, [2] p12 */
|
|
#define SPIDRR_8BIT_MASK (0xff << 0)
|
|
#define SPIDRR_16BIT_MASK (0xffff << 0)
|
|
#define SPIDRR_32BIT_MASK (0xffffffff << 0)
|
|
|
|
/* SPI Slave Select Register (spissr), [1] p13, [2] p13 */
|
|
#define SPISSR_MASK(cs) (1 << (cs))
|
|
#define SPISSR_ACT(cs) ~SPISSR_MASK(cs)
|
|
#define SPISSR_OFF ~0UL
|
|
|
|
/* SPI Transmit FIFO Occupancy Register (spitfor), [1] p13, [2] p14 */
|
|
#define SPITFOR_OCYVAL_POS 0
|
|
#define SPITFOR_OCYVAL_MASK (0xf << SPITFOR_OCYVAL_POS)
|
|
|
|
/* SPI Receive FIFO Occupancy Register (spirfor), [1] p14, [2] p14 */
|
|
#define SPIRFOR_OCYVAL_POS 0
|
|
#define SPIRFOR_OCYVAL_MASK (0xf << SPIRFOR_OCYVAL_POS)
|
|
|
|
/* SPI Software Reset Register (ssr) */
|
|
#define SPISSR_RESET_VALUE 0x0a
|
|
|
|
struct xilinx_spi_slave {
|
|
struct spi_slave slave;
|
|
struct xilinx_spi_reg *regs;
|
|
unsigned int freq;
|
|
unsigned int mode;
|
|
};
|
|
|
|
static inline struct xilinx_spi_slave *to_xilinx_spi_slave(
|
|
struct spi_slave *slave)
|
|
{
|
|
return container_of(slave, struct xilinx_spi_slave, slave);
|
|
}
|
|
|
|
#endif /* _XILINX_SPI_ */
|
|
|