upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/renesas/rsk7269/rsk7269.c

73 lines
1.7 KiB

/*
* Copyright (C) 2012 Renesas Electronics Europe Ltd.
* Copyright (C) 2012 Phil Edworthy
* Copyright (C) 2008 Renesas Solutions Corp.
* Copyright (C) 2008 Nobuhiro Iwamatsu
*
* Based on u-boot/board/rsk7264/rsk7264.c
*
* This file is released under the terms of GPL v2 and any later version.
* See the file COPYING in the root directory of the source tree for details.
*/
#include <common.h>
#include <net.h>
#include <netdev.h>
#include <asm/io.h>
#include <asm/processor.h>
DECLARE_GLOBAL_DATA_PTR;
int checkboard(void)
{
puts("BOARD: Renesas RSK7269\n");
return 0;
}
int board_init(void)
{
return 0;
}
int dram_init(void)
{
gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
printf("DRAM: %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));
return 0;
}
void led_set_state(unsigned short value)
{
}
/*
* The RSK board has the SMSC89218 wired up 'incorrectly'.
* Byte-swapping is necessary, and so poor performance is inevitable.
* This problem cannot evade by the swap function of CHIP, this can
* evade by software Byte-swapping.
* And this has problem by FIFO access only. pkt_data_pull/pkt_data_push
* functions necessary to solve this problem.
*/
u32 pkt_data_pull(struct eth_device *dev, u32 addr)
{
volatile u16 *addr_16 = (u16 *)(dev->iobase + addr);
return (u32)((swab16(*addr_16) << 16) & 0xFFFF0000)\
| swab16(*(addr_16 + 1));
}
void pkt_data_push(struct eth_device *dev, u32 addr, u32 val)
{
addr += dev->iobase;
*(volatile u16 *)(addr + 2) = swab16((u16)val);
*(volatile u16 *)(addr) = swab16((u16)(val >> 16));
}
int board_eth_init(bd_t *bis)
{
int rc = 0;
#ifdef CONFIG_SMC911X
rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
#endif
return rc;
}