upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support

You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Wu, Josh bdfd59aa0f at91: atmel_nand: Update driver to support Programmable Multibit ECC controller ... The Programmable Multibit ECC (PMECC) controller is a programmable binary BCH(Bose, Chaudhuri and Hocquenghem) encoder and decoder. This controller can be used to support both SLC and MLC NAND Flash devices. It supports to generate ECC to correct 2, 4, 8, 12 or 24 bits of error per sector of data. To use PMECC in this driver, the user needs to set the PMECC correction capability, the sector size and ROM lookup table offsets in board config file. This driver is ported from Linux kernel atmel_nand PMECC patch. The main difference is in this version it uses registers structure access hardware instead of using macros. It is tested in 9x5 serial boards. Signed-off-by: Josh Wu <josh.wu@atmel.com> [rebase] Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>		13 years ago
..
nand	at91: atmel_nand: Update driver to support Programmable Multibit ECC controller	13 years ago
onenand	…
spi	sf: spansion: Add support for S25FL256S	13 years ago
ubi	…
Makefile	…
at45.c	…
cfi_flash.c	mtd/cfi_flash: fix write problems for Numonyx P33/30 32 MBit flashs	13 years ago
cfi_mtd.c	…
dataflash.c	…
ftsmc020.c	…
jedec_flash.c	…
mtdconcat.c	…
mtdcore.c	…
mtdpart.c	…
mw_eeprom.c	…
st_smi.c	MTD: SPEAr SMI: Add write support for length < 4 bytes	13 years ago