upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/drivers/misc/ns87308.c

117 lines
3.4 KiB

/*
* (C) Copyright 2000
* Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <ns87308.h>
void initialise_ns87308 (void)
{
#ifdef CONFIG_SYS_NS87308_PS2MOD
unsigned char data;
/*
* Switch floppy drive to PS/2 mode.
*/
read_pnp_config(SUPOERIO_CONF1, &data);
data &= 0xFB;
write_pnp_config(SUPOERIO_CONF1, data);
#endif
#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_KBC1)
PNP_SET_DEVICE_BASE(LDEV_KBC1, CONFIG_SYS_NS87308_KBC1_BASE);
write_pnp_config(LUN_CONFIG_REG, 0);
write_pnp_config(CBASE_HIGH, 0x00);
write_pnp_config(CBASE_LOW, 0x64);
#endif
#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_MOUSE)
PNP_ACTIVATE_DEVICE(LDEV_MOUSE);
#endif
#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_RTC_APC)
PNP_SET_DEVICE_BASE(LDEV_RTC_APC, CONFIG_SYS_NS87308_RTC_BASE);
#endif
#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_FDC)
PNP_SET_DEVICE_BASE(LDEV_FDC, CONFIG_SYS_NS87308_FDC_BASE);
write_pnp_config(LUN_CONFIG_REG, 0x40);
#endif
#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_RARP)
PNP_SET_DEVICE_BASE(LDEV_PARP, CONFIG_SYS_NS87308_LPT_BASE);
#endif
#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_UART1)
PNP_SET_DEVICE_BASE(LDEV_UART1, CONFIG_SYS_NS87308_UART1_BASE);
#endif
#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_UART2)
PNP_SET_DEVICE_BASE(LDEV_UART2, CONFIG_SYS_NS87308_UART2_BASE);
#endif
#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_GPIO)
PNP_SET_DEVICE_BASE(LDEV_GPIO, CONFIG_SYS_NS87308_GPIO_BASE);
#endif
#if (CONFIG_SYS_NS87308_DEVS & CONFIG_SYS_NS87308_POWRMAN)
#ifndef CONFIG_SYS_NS87308_PWMAN_BASE
PNP_ACTIVATE_DEVICE(LDEV_POWRMAN);
#else
PNP_SET_DEVICE_BASE(LDEV_POWRMAN, CONFIG_SYS_NS87308_PWMAN_BASE);
/*
* Enable all units
*/
write_pm_reg(CONFIG_SYS_NS87308_PWMAN_BASE, PWM_FER1, 0x7d);
write_pm_reg(CONFIG_SYS_NS87308_PWMAN_BASE, PWM_FER2, 0x87);
#ifdef CONFIG_SYS_NS87308_PMC1
write_pm_reg(CONFIG_SYS_NS87308_PWMAN_BASE, PWM_PMC1, CONFIG_SYS_NS87308_PMC1);
#endif
#ifdef CONFIG_SYS_NS87308_PMC2
write_pm_reg(CONFIG_SYS_NS87308_PWMAN_BASE, PWM_PMC2, CONFIG_SYS_NS87308_PMC2);
#endif
#ifdef CONFIG_SYS_NS87308_PMC3
write_pm_reg(CONFIG_SYS_NS87308_PWMAN_BASE, PWM_PMC3, CONFIG_SYS_NS87308_PMC3);
#endif
#endif
#endif
#ifdef CONFIG_SYS_NS87308_CS0_BASE
PNP_PGCS_CSLINE_BASE(0, CONFIG_SYS_NS87308_CS0_BASE);
PNP_PGCS_CSLINE_CONF(0, CONFIG_SYS_NS87308_CS0_CONF);
#endif
#ifdef CONFIG_SYS_NS87308_CS1_BASE
PNP_PGCS_CSLINE_BASE(1, CONFIG_SYS_NS87308_CS1_BASE);
PNP_PGCS_CSLINE_CONF(1, CONFIG_SYS_NS87308_CS1_CONF);
#endif
#ifdef CONFIG_SYS_NS87308_CS2_BASE
PNP_PGCS_CSLINE_BASE(2, CONFIG_SYS_NS87308_CS2_BASE);
PNP_PGCS_CSLINE_CONF(2, CONFIG_SYS_NS87308_CS2_CONF);
#endif
}