upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
141 lines
4.1 KiB
141 lines
4.1 KiB
/*
|
|
* (C) Copyright 2004
|
|
* Tolunay Orkun, Nextio Inc., torkun@nextio.com
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/processor.h>
|
|
#include <i2c.h>
|
|
#include <miiphy.h>
|
|
#include <ppc4xx_enet.h>
|
|
|
|
/*
|
|
* board_early_init_f: do early board initialization
|
|
*
|
|
*/
|
|
int board_early_init_f(void)
|
|
{
|
|
/*-------------------------------------------------------------------------+
|
|
| Interrupt controller setup for the Walnut board.
|
|
| Note: IRQ 0-15 405GP internally generated; active high; level sensitive
|
|
| IRQ 16 405GP internally generated; active low; level sensitive
|
|
| IRQ 17-24 RESERVED
|
|
| IRQ 25 (EXT IRQ 0) FPGA; active high; level sensitive
|
|
| IRQ 26 (EXT IRQ 1) SMI; active high; level sensitive
|
|
| IRQ 27 (EXT IRQ 2) Not Used
|
|
| IRQ 28 (EXT IRQ 3) PCI SLOT 3; active low; level sensitive
|
|
| IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
|
|
| IRQ 30 (EXT IRQ 5) PCI SLOT 1; active low; level sensitive
|
|
| IRQ 31 (EXT IRQ 6) PCI SLOT 0; active low; level sensitive
|
|
| Note for Walnut board:
|
|
| An interrupt taken for the FPGA (IRQ 25) indicates that either
|
|
| the Mouse, Keyboard, IRDA, or External Expansion caused the
|
|
| interrupt. The FPGA must be read to determine which device
|
|
| caused the interrupt. The default setting of the FPGA clears
|
|
|
|
|
+-------------------------------------------------------------------------*/
|
|
|
|
mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
|
|
mtdcr (uicer, 0x00000000); /* disable all ints */
|
|
mtdcr (uiccr, 0x00000000); /* set all to be non-critical */
|
|
mtdcr (uicpr, 0xFFFFFF83); /* set int polarities */
|
|
mtdcr (uictr, 0x10000000); /* set int trigger levels */
|
|
mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
|
|
mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
|
|
|
|
mtebc (epcr, 0xa8400000); /* EBC always driven */
|
|
|
|
return 0; /* success */
|
|
}
|
|
|
|
/*
|
|
* checkboard: identify/verify the board we are running
|
|
*
|
|
* Remark: we just assume it is correct board here!
|
|
*
|
|
*/
|
|
int checkboard(void)
|
|
{
|
|
printf("BOARD: Cogent CSB472\n");
|
|
|
|
return 0; /* success */
|
|
}
|
|
|
|
/*
|
|
* initram: Determine the size of mounted DRAM
|
|
*
|
|
* Size is determined by reading SDRAM configuration registers as
|
|
* configured by initialization code
|
|
*
|
|
*/
|
|
long initdram (int board_type)
|
|
{
|
|
ulong tot_size;
|
|
ulong bank_size;
|
|
ulong tmp;
|
|
|
|
tot_size = 0;
|
|
|
|
mtdcr (memcfga, mem_mb0cf);
|
|
tmp = mfdcr (memcfgd);
|
|
if (tmp & 0x00000001) {
|
|
bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
|
|
tot_size += bank_size;
|
|
}
|
|
|
|
mtdcr (memcfga, mem_mb1cf);
|
|
tmp = mfdcr (memcfgd);
|
|
if (tmp & 0x00000001) {
|
|
bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
|
|
tot_size += bank_size;
|
|
}
|
|
|
|
mtdcr (memcfga, mem_mb2cf);
|
|
tmp = mfdcr (memcfgd);
|
|
if (tmp & 0x00000001) {
|
|
bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
|
|
tot_size += bank_size;
|
|
}
|
|
|
|
mtdcr (memcfga, mem_mb3cf);
|
|
tmp = mfdcr (memcfgd);
|
|
if (tmp & 0x00000001) {
|
|
bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
|
|
tot_size += bank_size;
|
|
}
|
|
|
|
return tot_size;
|
|
}
|
|
|
|
/*
|
|
* last_stage_init: final configurations (such as PHY etc)
|
|
*
|
|
*/
|
|
int last_stage_init(void)
|
|
{
|
|
/* initialize the PHY */
|
|
miiphy_reset(CONFIG_PHY_ADDR);
|
|
miiphy_write(CONFIG_PHY_ADDR, PHY_BMCR,
|
|
PHY_BMCR_AUTON | PHY_BMCR_RST_NEG); /* AUTO neg */
|
|
miiphy_write(CONFIG_PHY_ADDR, PHY_FCSCR, 0x0d08); /* LEDs */
|
|
|
|
return 0; /* success */
|
|
}
|
|
|