upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
380 lines
11 KiB
380 lines
11 KiB
/*
|
|
* (C) Copyright 2003-2005
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* (C) Copyright 2010
|
|
* Sergei Poselenov, Emcraft Systems, sposelenov@emcraft.com.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
* (easy to change)
|
|
*/
|
|
|
|
#define CONFIG_MPC5200 1 /* This is a MPC5200 CPU */
|
|
#define CONFIG_A4M072 1 /* ... on A4M072 board */
|
|
#define CONFIG_MPC5200_DDR 1 /* ... use DDR RAM */
|
|
#define CONFIG_DISPLAY_BOARDINFO
|
|
#define CONFIG_SYS_GENERIC_BOARD
|
|
|
|
#define CONFIG_SYS_TEXT_BASE 0xFE000000
|
|
|
|
#define CONFIG_MISC_INIT_R
|
|
|
|
#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
|
|
|
|
#define CONFIG_HIGH_BATS 1 /* High BATs supported */
|
|
|
|
/*
|
|
* Serial console configuration
|
|
*/
|
|
#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
|
|
#define CONFIG_BAUDRATE 9600 /* ... at 9600 bps */
|
|
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
|
|
/* define to enable silent console */
|
|
#define CONFIG_SILENT_CONSOLE
|
|
#define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */
|
|
|
|
/*
|
|
* PCI Mapping:
|
|
* 0x40000000 - 0x4fffffff - PCI Memory
|
|
* 0x50000000 - 0x50ffffff - PCI IO Space
|
|
*/
|
|
#define CONFIG_PCI
|
|
|
|
#if defined(CONFIG_PCI)
|
|
#define CONFIG_PCI_PNP 1
|
|
#define CONFIG_PCI_SCAN_SHOW 1
|
|
#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1
|
|
|
|
#define CONFIG_PCI_MEM_BUS 0x40000000
|
|
#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
|
|
#define CONFIG_PCI_MEM_SIZE 0x10000000
|
|
|
|
#define CONFIG_PCI_IO_BUS 0x50000000
|
|
#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
|
|
#define CONFIG_PCI_IO_SIZE 0x01000000
|
|
#endif
|
|
|
|
#define CONFIG_SYS_XLB_PIPELINING 1
|
|
|
|
#undef CONFIG_EEPRO100
|
|
|
|
/* Partitions */
|
|
#define CONFIG_MAC_PARTITION
|
|
#define CONFIG_DOS_PARTITION
|
|
|
|
/* USB */
|
|
#define CONFIG_USB_OHCI_NEW
|
|
#define CONFIG_USB_STORAGE
|
|
#define CONFIG_SYS_OHCI_BE_CONTROLLER
|
|
#undef CONFIG_SYS_USB_OHCI_BOARD_INIT
|
|
#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
|
|
#define CONFIG_SYS_USB_OHCI_REGS_BASE MPC5XXX_USB
|
|
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "mpc5200"
|
|
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
|
|
|
|
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_EEPROM
|
|
#define CONFIG_CMD_FAT
|
|
#define CONFIG_CMD_I2C
|
|
#define CONFIG_CMD_IDE
|
|
#define CONFIG_CMD_NFS
|
|
#define CONFIG_CMD_SNTP
|
|
#define CONFIG_CMD_USB
|
|
#define CONFIG_CMD_MII
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_DISPLAY
|
|
|
|
#if defined(CONFIG_PCI)
|
|
#define CONFIG_CMD_PCI
|
|
#endif
|
|
|
|
#if (CONFIG_SYS_TEXT_BASE == 0xFE000000) /* Boot low with 32 MB Flash */
|
|
#define CONFIG_SYS_LOWBOOT 1
|
|
#define CONFIG_SYS_LOWBOOT32 1
|
|
#endif
|
|
|
|
/*
|
|
* Autobooting
|
|
*/
|
|
#define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */
|
|
|
|
#define CONFIG_SYS_AUTOLOAD "n"
|
|
|
|
#define CONFIG_AUTOBOOT_KEYED
|
|
#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n", bootdelay
|
|
#define CONFIG_AUTOBOOT_DELAY_STR "asdfg"
|
|
|
|
#undef CONFIG_BOOTARGS
|
|
#define CONFIG_PREBOOT "run try_update"
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"bk=run add_mtd ; run add_consolespec ; bootm 200000\0" \
|
|
"cf1=diskboot 200000 0:1\0" \
|
|
"bootcmd_cf1=run bcf1\0" \
|
|
"bcf=setenv bootargs root=/dev/hda3\0" \
|
|
"bootcmd_nfs=run bnfs\0" \
|
|
"norargs=setenv bootargs root=/dev/mtdblock3 rootfstype=cramfs "\
|
|
"panic=1\0" \
|
|
"bootcmd_nor=cp.b ${kernel_addr} 200000 100000;" \
|
|
"run norargs addip; run bk\0" \
|
|
"bnfs=nfs 200000 ${rootpath}/boot/uImage;" \
|
|
"run nfsargs addip ; run bk\0" \
|
|
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
|
"nfsroot=${serverip}:${rootpath}\0" \
|
|
"try_update=usb start;sleep 2;usb start;sleep 1;" \
|
|
"fatload usb 0 2F0000 PCPUUPDT 2FF;usb stop;" \
|
|
"source 2F0000\0" \
|
|
"env_addr=FE060000\0" \
|
|
"kernel_addr=FE100000\0" \
|
|
"rootfs_addr=FE200000\0" \
|
|
"add_mtd=setenv bootargs ${bootargs} mtdparts=" \
|
|
"phys_mapped_flash:384k(u),640k(e),1m(k),30m(r)\0" \
|
|
"bcf1=run cf1; run bcf; run addip; run bk\0" \
|
|
"add_consolespec=setenv bootargs ${bootargs} " \
|
|
"console=/dev/null quiet\0" \
|
|
"addip=if test -n ${ethaddr};" \
|
|
"then if test -n ${ipaddr};" \
|
|
"then setenv bootargs ${bootargs} " \
|
|
"ip=${ipaddr}:${serverip}:${gatewayip}:"\
|
|
"${netmask}:${hostname}:${netdev}:off;" \
|
|
"fi;" \
|
|
"else;" \
|
|
"setenv bootargs ${bootargs} no_ethaddr;" \
|
|
"fi\0" \
|
|
"hostname=CPUP0\0" \
|
|
"ethaddr=00:00:00:00:00:00\0" \
|
|
"netdev=eth0\0" \
|
|
"bootcmd=run bootcmd_nor\0" \
|
|
""
|
|
/*
|
|
* IPB Bus clocking configuration.
|
|
*/
|
|
#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
|
|
|
|
/*
|
|
* I2C configuration
|
|
*/
|
|
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
|
|
#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */
|
|
|
|
#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
|
|
#define CONFIG_SYS_I2C_SLAVE 0x7F
|
|
|
|
/*
|
|
* EEPROM configuration
|
|
*/
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* 1010010x */
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
|
|
#define CONFIG_SYS_EEPROM_WREN 1
|
|
#define CONFIG_SYS_EEPROM_WP GPIO_PSC2_4
|
|
|
|
/*
|
|
* Flash configuration
|
|
*/
|
|
#define CONFIG_SYS_FLASH_BASE 0xFE000000
|
|
#define CONFIG_SYS_FLASH_SIZE 0x02000000
|
|
#if !defined(CONFIG_SYS_LOWBOOT)
|
|
#error "CONFIG_SYS_LOWBOOT not defined?"
|
|
#else /* CONFIG_SYS_LOWBOOT */
|
|
#if defined(CONFIG_SYS_LOWBOOT32)
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00060000)
|
|
#endif
|
|
#endif /* CONFIG_SYS_LOWBOOT */
|
|
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max num of sects on one chip */
|
|
#define CONFIG_FLASH_CFI_DRIVER
|
|
#define CONFIG_SYS_FLASH_CFI
|
|
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
|
|
#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_CS0_START}
|
|
#define CONFIG_SYS_FLASH_BANKS_SIZES {CONFIG_SYS_CS0_SIZE}
|
|
|
|
/*
|
|
* Environment settings
|
|
*/
|
|
#define CONFIG_ENV_IS_IN_FLASH 1
|
|
#define CONFIG_ENV_SIZE 0x10000
|
|
#define CONFIG_ENV_SECT_SIZE 0x20000
|
|
#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
|
|
#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
|
|
|
|
#define CONFIG_ENV_OVERWRITE 1
|
|
|
|
/*
|
|
* Memory map
|
|
*/
|
|
#define CONFIG_SYS_MBAR 0xF0000000
|
|
#define CONFIG_SYS_SDRAM_BASE 0x00000000
|
|
#define CONFIG_SYS_DEFAULT_MBAR 0x80000000
|
|
|
|
/* Use SRAM until RAM will be available */
|
|
#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM
|
|
#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */
|
|
|
|
|
|
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
|
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
|
|
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
|
|
# define CONFIG_SYS_RAMBOOT 1
|
|
#endif
|
|
|
|
#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */
|
|
#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
|
|
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
|
|
|
/*
|
|
* Ethernet configuration
|
|
*/
|
|
#define CONFIG_MPC5xxx_FEC 1
|
|
#define CONFIG_MPC5xxx_FEC_MII100
|
|
/*
|
|
* Define CONFIG_MPC5xxx_FEC_MII10 to force FEC at 10Mb
|
|
*/
|
|
/* #define CONFIG_MPC5xxx_FEC_MII10 */
|
|
#define CONFIG_PHY_ADDR 0x1f
|
|
#define CONFIG_PHY_TYPE 0x79c874 /* AMD Phy Controller */
|
|
|
|
/*
|
|
* GPIO configuration
|
|
*/
|
|
#define CONFIG_SYS_GPS_PORT_CONFIG 0x18000004
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CONFIG_SYS_HUSH_PARSER
|
|
#define CONFIG_CMDLINE_EDITING 1
|
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
#else
|
|
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#endif
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
|
|
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
|
|
#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
|
|
|
|
#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
|
|
#endif
|
|
|
|
|
|
/*
|
|
* Various low-level settings
|
|
*/
|
|
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
|
|
#define CONFIG_SYS_HID0_FINAL HID0_ICE
|
|
/* Flash at CSBoot, CS0 */
|
|
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
|
|
#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
|
|
#define CONFIG_SYS_BOOTCS_CFG 0x0002DD00
|
|
#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE
|
|
#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE
|
|
/* External SRAM at CS1 */
|
|
#define CONFIG_SYS_CS1_START 0x62000000
|
|
#define CONFIG_SYS_CS1_SIZE 0x00400000
|
|
#define CONFIG_SYS_CS1_CFG 0x00009930
|
|
#define CONFIG_SYS_SRAM_BASE CONFIG_SYS_CS1_START
|
|
#define CONFIG_SYS_SRAM_SIZE CONFIG_SYS_CS1_SIZE
|
|
/* LED display at CS7 */
|
|
#define CONFIG_SYS_CS7_START 0x6a000000
|
|
#define CONFIG_SYS_CS7_SIZE (64*1024)
|
|
#define CONFIG_SYS_CS7_CFG 0x0000bf30
|
|
|
|
#define CONFIG_SYS_CS_BURST 0x00000000
|
|
#define CONFIG_SYS_CS_DEADCYCLE 0x33333003
|
|
|
|
#define CONFIG_SYS_RESET_ADDRESS 0xff000000
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* USB stuff
|
|
*-----------------------------------------------------------------------
|
|
*/
|
|
#define CONFIG_USB_CLOCK 0x0001BBBB
|
|
#define CONFIG_USB_CONFIG 0x00001000 /* 0x4000 for SE mode */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* IDE/ATA stuff Supports IDE harddisk
|
|
*-----------------------------------------------------------------------
|
|
*/
|
|
|
|
#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
|
|
|
|
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
|
|
#undef CONFIG_IDE_LED /* LED for ide not supported */
|
|
|
|
#define CONFIG_IDE_PREINIT
|
|
|
|
#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
|
|
#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 2 drives per IDE bus */
|
|
|
|
#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
|
|
|
|
#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA
|
|
|
|
/* Offset for data I/O */
|
|
#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060)
|
|
|
|
/* Offset for normal register accesses */
|
|
#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET)
|
|
|
|
/* Offset for alternate registers */
|
|
#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C)
|
|
|
|
/* Interval between registers */
|
|
#define CONFIG_SYS_ATA_STRIDE 4
|
|
|
|
#define CONFIG_ATAPI 1
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Open firmware flat tree support
|
|
*-----------------------------------------------------------------------
|
|
*/
|
|
#define CONFIG_OF_LIBFDT 1
|
|
#define CONFIG_OF_BOARD_SETUP 1
|
|
|
|
#define OF_CPU "PowerPC,5200@0"
|
|
#define OF_SOC "soc5200@f0000000"
|
|
#define OF_TBCLK (bd->bi_busfreq / 4)
|
|
#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000"
|
|
|
|
/* Support for the 7-segment display */
|
|
#define CONFIG_SYS_DISP_CHR_RAM CONFIG_SYS_CS7_START
|
|
#define CONFIG_SHOW_ACTIVITY /* used for display realization */
|
|
|
|
#define CONFIG_SHOW_BOOT_PROGRESS
|
|
|
|
#endif /* __CONFIG_H */
|
|
|