upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support

You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Wenyou Yang e7c831543a clk: at91: utmi: Set the reference clock frequency ... By default, it is assumed that the UTMI clock is generated from a 12 MHz reference clock (MAINCK). If it's not the case, the FREQ field of the SFR_UTMICKTRIM has to be updated to generate the UTMI clock in the proper way. The UTMI clock has a fixed rate of 480 MHz. In fact, there is no multiplier we can configure. The multiplier is managed internally, depending on the reference clock frequency, to achieve the target of 480 MHz. The patch is cloned from the patch of mailing-list: [PATCH v2] clk: at91: utmi: set the mainck rate Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> [trini: Depend on SPL_DM] Signed-off-by: Tom Rini <trini@konsulko.com>		7 years ago
..
Kconfig	clk: at91: utmi: Set the reference clock frequency	7 years ago
Makefile	…
clk-generated.c	dm: Use dm.h header when driver mode is used	7 years ago
clk-h32mx.c	dm: Use dm.h header when driver mode is used	7 years ago
clk-main.c	dm: Use dm.h header when driver mode is used	7 years ago
clk-master.c	dm: Use dm.h header when driver mode is used	7 years ago
clk-peripheral.c	dm: Use dm.h header when driver mode is used	7 years ago
clk-plla.c	dm: Use dm.h header when driver mode is used	7 years ago
clk-slow.c	dm: Use dm.h header when driver mode is used	7 years ago
clk-system.c	dm: Use dm.h header when driver mode is used	7 years ago
clk-utmi.c	clk: at91: utmi: Set the reference clock frequency	7 years ago
pmc.c	clk: Modify xlate() method for livetree	7 years ago
pmc.h	clk: at91: utmi: Set the reference clock frequency	7 years ago
sckc.c	dm: Use dm.h header when driver mode is used	7 years ago