upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
99 lines
3.2 KiB
99 lines
3.2 KiB
/*
|
|
* Copyright 2010-2011 Freescale Semiconductor, Inc.
|
|
* Author: Roy Zang <tie-fei.zang@freescale.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
*
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <ns16550.h>
|
|
#include <asm/io.h>
|
|
#include <nand.h>
|
|
#include <asm/fsl_law.h>
|
|
|
|
/* Fixed sdram init -- doesn't use serial presence detect. */
|
|
void sdram_init(void)
|
|
{
|
|
ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR;
|
|
|
|
set_next_law(0, LAW_SIZE_2G, LAW_TRGT_IF_DDR_1);
|
|
|
|
out_be32(&ddr->cs0_bnds, CONFIG_SYS_DDR_CS0_BNDS);
|
|
out_be32(&ddr->cs0_config, CONFIG_SYS_DDR_CS0_CONFIG);
|
|
out_be32(&ddr->cs1_bnds, CONFIG_SYS_DDR_CS1_BNDS);
|
|
out_be32(&ddr->cs1_config, CONFIG_SYS_DDR_CS1_CONFIG);
|
|
out_be32(&ddr->timing_cfg_3, CONFIG_SYS_DDR_TIMING_3);
|
|
out_be32(&ddr->timing_cfg_0, CONFIG_SYS_DDR_TIMING_0);
|
|
out_be32(&ddr->timing_cfg_1, CONFIG_SYS_DDR_TIMING_1);
|
|
out_be32(&ddr->timing_cfg_2, CONFIG_SYS_DDR_TIMING_2);
|
|
out_be32(&ddr->sdram_cfg_2, CONFIG_SYS_DDR_CONTROL2);
|
|
out_be32(&ddr->sdram_mode, CONFIG_SYS_DDR_MODE_1);
|
|
out_be32(&ddr->sdram_mode_2, CONFIG_SYS_DDR_MODE_2);
|
|
out_be32(&ddr->sdram_interval, CONFIG_SYS_DDR_INTERVAL);
|
|
out_be32(&ddr->sdram_data_init, CONFIG_SYS_DDR_DATA_INIT);
|
|
out_be32(&ddr->sdram_clk_cntl, CONFIG_SYS_DDR_CLK_CTRL);
|
|
out_be32(&ddr->timing_cfg_4, CONFIG_SYS_DDR_TIMING_4);
|
|
out_be32(&ddr->timing_cfg_5, CONFIG_SYS_DDR_TIMING_5);
|
|
out_be32(&ddr->ddr_zq_cntl, CONFIG_SYS_DDR_ZQ_CNTL);
|
|
out_be32(&ddr->ddr_wrlvl_cntl, CONFIG_SYS_DDR_WRLVL_CNTL);
|
|
out_be32(&ddr->ddr_cdr1, CONFIG_SYS_DDR_CDR_1);
|
|
out_be32(&ddr->ddr_cdr2, CONFIG_SYS_DDR_CDR_2);
|
|
out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_CONTROL);
|
|
}
|
|
|
|
void board_init_f(ulong bootflag)
|
|
{
|
|
u32 plat_ratio, bus_clk;
|
|
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
|
|
|
|
/* initialize selected port with appropriate baud rate */
|
|
plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
|
|
plat_ratio >>= 1;
|
|
bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
|
|
NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
|
|
bus_clk / 16 / CONFIG_BAUDRATE);
|
|
|
|
puts("\nNAND boot... ");
|
|
/* Initialize the DDR3 */
|
|
sdram_init();
|
|
/* copy code to RAM and jump to it - this should not return */
|
|
/* NOTE - code has to be copied out of NAND buffer before
|
|
* other blocks can be read.
|
|
*/
|
|
relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC_SP, 0,
|
|
CONFIG_SYS_NAND_U_BOOT_RELOC);
|
|
}
|
|
|
|
void board_init_r(gd_t *gd, ulong dest_addr)
|
|
{
|
|
nand_boot();
|
|
}
|
|
|
|
void putc(char c)
|
|
{
|
|
if (c == '\n')
|
|
NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r');
|
|
|
|
NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c);
|
|
}
|
|
|
|
void puts(const char *str)
|
|
{
|
|
while (*str)
|
|
putc(*str++);
|
|
}
|
|
|