upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/freescale/mpc8323erdb/mpc8323erdb.c

222 lines
5.7 KiB

/*
* Copyright (C) 2007 Freescale Semiconductor, Inc.
*
* Michael Barkowski <michael.barkowski@freescale.com>
* Based on mpc832xmds file by Dave Liu <daveliu@freescale.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <common.h>
#include <ioports.h>
#include <mpc83xx.h>
#include <i2c.h>
#include <miiphy.h>
#include <command.h>
#include <libfdt.h>
#if defined(CONFIG_PCI)
#include <pci.h>
#endif
#include <asm/mmu.h>
const qe_iop_conf_t qe_iop_conf_tab[] = {
/* UCC3 */
{1, 0, 1, 0, 1}, /* TxD0 */
{1, 1, 1, 0, 1}, /* TxD1 */
{1, 2, 1, 0, 1}, /* TxD2 */
{1, 3, 1, 0, 1}, /* TxD3 */
{1, 9, 1, 0, 1}, /* TxER */
{1, 12, 1, 0, 1}, /* TxEN */
{3, 24, 2, 0, 1}, /* TxCLK->CLK10 */
{1, 4, 2, 0, 1}, /* RxD0 */
{1, 5, 2, 0, 1}, /* RxD1 */
{1, 6, 2, 0, 1}, /* RxD2 */
{1, 7, 2, 0, 1}, /* RxD3 */
{1, 8, 2, 0, 1}, /* RxER */
{1, 10, 2, 0, 1}, /* RxDV */
{0, 13, 2, 0, 1}, /* RxCLK->CLK9 */
{1, 11, 2, 0, 1}, /* COL */
{1, 13, 2, 0, 1}, /* CRS */
/* UCC2 */
{0, 18, 1, 0, 1}, /* TxD0 */
{0, 19, 1, 0, 1}, /* TxD1 */
{0, 20, 1, 0, 1}, /* TxD2 */
{0, 21, 1, 0, 1}, /* TxD3 */
{0, 27, 1, 0, 1}, /* TxER */
{0, 30, 1, 0, 1}, /* TxEN */
{3, 23, 2, 0, 1}, /* TxCLK->CLK3 */
{0, 22, 2, 0, 1}, /* RxD0 */
{0, 23, 2, 0, 1}, /* RxD1 */
{0, 24, 2, 0, 1}, /* RxD2 */
{0, 25, 2, 0, 1}, /* RxD3 */
{0, 26, 1, 0, 1}, /* RxER */
{0, 28, 2, 0, 1}, /* Rx_DV */
{3, 21, 2, 0, 1}, /* RxCLK->CLK16 */
{0, 29, 2, 0, 1}, /* COL */
{0, 31, 2, 0, 1}, /* CRS */
{3, 4, 3, 0, 2}, /* MDIO */
{3, 5, 1, 0, 2}, /* MDC */
{0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */
};
int fixed_sdram(void);
phys_size_t initdram(int board_type)
{
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
u32 msize = 0;
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
return -1;
/* DDR SDRAM - Main SODIMM */
im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
msize = fixed_sdram();
/* return total bus SDRAM size(bytes) -- DDR */
return (msize * 1024 * 1024);
}
/*************************************************************************
* fixed sdram init -- doesn't use serial presence detect.
************************************************************************/
int fixed_sdram(void)
{
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
u32 msize = 0;
u32 ddr_size;
u32 ddr_size_log2;
msize = CONFIG_SYS_DDR_SIZE;
for (ddr_size = msize << 20, ddr_size_log2 = 0;
(ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) {
if (ddr_size & 1) {
return -1;
}
}
im->sysconf.ddrlaw[0].ar =
LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL;
im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS;
im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
__asm__ __volatile__ ("sync");
udelay(200);
im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
__asm__ __volatile__ ("sync");
return msize;
}
int checkboard(void)
{
puts("Board: Freescale MPC8323ERDB\n");
return 0;
}
static struct pci_region pci_regions[] = {
{
bus_start: CONFIG_SYS_PCI1_MEM_BASE,
phys_start: CONFIG_SYS_PCI1_MEM_PHYS,
size: CONFIG_SYS_PCI1_MEM_SIZE,
flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
},
{
bus_start: CONFIG_SYS_PCI1_MMIO_BASE,
phys_start: CONFIG_SYS_PCI1_MMIO_PHYS,
size: CONFIG_SYS_PCI1_MMIO_SIZE,
flags: PCI_REGION_MEM
},
{
bus_start: CONFIG_SYS_PCI1_IO_BASE,
phys_start: CONFIG_SYS_PCI1_IO_PHYS,
size: CONFIG_SYS_PCI1_IO_SIZE,
flags: PCI_REGION_IO
}
};
void pci_init_board(void)
{
volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
struct pci_region *reg[] = { pci_regions };
/* Enable all 3 PCI_CLK_OUTPUTs. */
clk->occr |= 0xe0000000;
/* Configure PCI Local Access Windows */
pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR;
pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB;
pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR;
pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
mpc83xx_pci_init(1, reg);
}
#if defined(CONFIG_OF_BOARD_SETUP)
int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif
return 0;
}
#endif
#if defined(CONFIG_SYS_I2C_MAC_OFFSET)
int mac_read_from_eeprom(void)
{
uchar buf[28];
char str[18];
int i = 0;
unsigned int crc = 0;
unsigned char enetvar[32];
/* Read MAC addresses from EEPROM */
if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, CONFIG_SYS_I2C_MAC_OFFSET, buf, 28)) {
printf("\nEEPROM @ 0x%02x read FAILED!!!\n",
CONFIG_SYS_I2C_EEPROM_ADDR);
} else {
uint32_t crc_buf;
memcpy(&crc_buf, &buf[24], sizeof(uint32_t));
if (crc32(crc, buf, 24) == crc_buf) {
printf("Reading MAC from EEPROM\n");
for (i = 0; i < 4; i++) {
if (memcmp(&buf[i * 6], "\0\0\0\0\0\0", 6)) {
sprintf(str,
"%02X:%02X:%02X:%02X:%02X:%02X",
buf[i * 6], buf[i * 6 + 1],
buf[i * 6 + 2], buf[i * 6 + 3],
buf[i * 6 + 4], buf[i * 6 + 5]);
sprintf((char *)enetvar,
i ? "eth%daddr" : "ethaddr", i);
setenv((char *)enetvar, str);
}
}
}
}
return 0;
}
#endif /* CONFIG_I2C_MAC_OFFSET */