upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/drivers/i2c/ihs_i2c.c

463 lines
11 KiB

/*
* (C) Copyright 2013
* Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <i2c.h>
#ifdef CONFIG_DM_I2C
#include <dm.h>
#include <fpgamap.h>
#include "../misc/gdsys_soc.h"
#else
#include <gdsys_fpga.h>
#endif
#include <asm/unaligned.h>
#ifdef CONFIG_DM_I2C
struct ihs_i2c_priv {
uint speed;
phys_addr_t addr;
};
enum {
REG_INTERRUPT_STATUS = 0x00,
REG_INTERRUPT_ENABLE_CONTROL = 0x02,
REG_WRITE_MAILBOX_EXT = 0x04,
REG_WRITE_MAILBOX = 0x06,
REG_READ_MAILBOX_EXT = 0x08,
REG_READ_MAILBOX = 0x0A,
};
#else /* !CONFIG_DM_I2C */
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_SYS_I2C_IHS_DUAL
#define I2C_SET_REG(fld, val) \
do { \
if (I2C_ADAP_HWNR & 0x10) \
FPGA_SET_REG(I2C_ADAP_HWNR & 0xf, i2c1.fld, val); \
else \
FPGA_SET_REG(I2C_ADAP_HWNR, i2c0.fld, val); \
} while (0)
#else
#define I2C_SET_REG(fld, val) \
FPGA_SET_REG(I2C_ADAP_HWNR, i2c0.fld, val)
#endif
#ifdef CONFIG_SYS_I2C_IHS_DUAL
#define I2C_GET_REG(fld, val) \
do { \
if (I2C_ADAP_HWNR & 0x10) \
FPGA_GET_REG(I2C_ADAP_HWNR & 0xf, i2c1.fld, val); \
else \
FPGA_GET_REG(I2C_ADAP_HWNR, i2c0.fld, val); \
} while (0)
#else
#define I2C_GET_REG(fld, val) \
FPGA_GET_REG(I2C_ADAP_HWNR, i2c0.fld, val)
#endif
#endif /* CONFIG_DM_I2C */
enum {
I2CINT_ERROR_EV = BIT(13),
I2CINT_TRANSMIT_EV = BIT(14),
I2CINT_RECEIVE_EV = BIT(15),
};
enum {
I2CMB_READ = 0 << 10,
I2CMB_WRITE = 1 << 10,
I2CMB_1BYTE = 0 << 11,
I2CMB_2BYTE = 1 << 11,
I2CMB_DONT_HOLD_BUS = 0 << 13,
I2CMB_HOLD_BUS = 1 << 13,
I2CMB_NATIVE = 2 << 14,
};
enum {
I2COP_WRITE = 0,
I2COP_READ = 1,
};
#ifdef CONFIG_DM_I2C
static int wait_for_int(struct udevice *dev, int read)
#else
static int wait_for_int(bool read)
#endif
{
u16 val;
uint ctr = 0;
#ifdef CONFIG_DM_I2C
struct ihs_i2c_priv *priv = dev_get_priv(dev);
struct udevice *fpga;
gdsys_soc_get_fpga(dev, &fpga);
#endif
#ifdef CONFIG_DM_I2C
fpgamap_read16(fpga, priv->addr + REG_INTERRUPT_STATUS, &val);
#else
I2C_GET_REG(interrupt_status, &val);
#endif
/* Wait until error or receive/transmit interrupt was raised */
while (!(val & (I2CINT_ERROR_EV
| (read ? I2CINT_RECEIVE_EV : I2CINT_TRANSMIT_EV)))) {
udelay(10);
if (ctr++ > 5000)
return 1;
#ifdef CONFIG_DM_I2C
fpgamap_read16(fpga, priv->addr + REG_INTERRUPT_STATUS, &val);
#else
I2C_GET_REG(interrupt_status, &val);
#endif
}
return (val & I2CINT_ERROR_EV) ? 1 : 0;
}
#ifdef CONFIG_DM_I2C
static int ihs_i2c_transfer(struct udevice *dev, uchar chip,
uchar *buffer, int len, int read, bool is_last)
#else
static int ihs_i2c_transfer(uchar chip, uchar *buffer, int len, bool read,
bool is_last)
#endif
{
u16 val;
#ifdef CONFIG_DM_I2C
struct ihs_i2c_priv *priv = dev_get_priv(dev);
struct udevice *fpga;
gdsys_soc_get_fpga(dev, &fpga);
#endif
/* Clear interrupt status */
#ifdef CONFIG_DM_I2C
fpgamap_write16(fpga, priv->addr + REG_INTERRUPT_STATUS,
I2CINT_ERROR_EV | I2CINT_RECEIVE_EV | I2CINT_TRANSMIT_EV);
fpgamap_read16(fpga, priv->addr + REG_INTERRUPT_STATUS, &val);
#else
I2C_SET_REG(interrupt_status, I2CINT_ERROR_EV
| I2CINT_RECEIVE_EV | I2CINT_TRANSMIT_EV);
I2C_GET_REG(interrupt_status, &val);
#endif
/* If we want to write and have data, write the bytes to the mailbox */
if (!read && len) {
val = buffer[0];
if (len > 1)
val |= buffer[1] << 8;
#ifdef CONFIG_DM_I2C
fpgamap_write16(fpga, priv->addr + REG_WRITE_MAILBOX_EXT, val);
#else
I2C_SET_REG(write_mailbox_ext, val);
#endif
}
#ifdef CONFIG_DM_I2C
fpgamap_write16(fpga, priv->addr + REG_WRITE_MAILBOX,
I2CMB_NATIVE
| (read ? I2CMB_READ : I2CMB_WRITE)
| (chip << 1)
| ((len > 1) ? I2CMB_2BYTE : I2CMB_1BYTE)
| (!is_last ? I2CMB_HOLD_BUS : I2CMB_DONT_HOLD_BUS));
#else
I2C_SET_REG(write_mailbox,
I2CMB_NATIVE
| (read ? 0 : I2CMB_WRITE)
| (chip << 1)
| ((len > 1) ? I2CMB_2BYTE : 0)
| (is_last ? 0 : I2CMB_HOLD_BUS));
#endif
#ifdef CONFIG_DM_I2C
if (wait_for_int(dev, read))
#else
if (wait_for_int(read))
#endif
return 1;
/* If we want to read, get the bytes from the mailbox */
if (read) {
#ifdef CONFIG_DM_I2C
fpgamap_read16(fpga, priv->addr + REG_READ_MAILBOX_EXT, &val);
#else
I2C_GET_REG(read_mailbox_ext, &val);
#endif
buffer[0] = val & 0xff;
if (len > 1)
buffer[1] = val >> 8;
}
return 0;
}
#ifdef CONFIG_DM_I2C
static int ihs_i2c_send_buffer(struct udevice *dev, uchar chip, u8 *data, int len, bool hold_bus, int read)
#else
static int ihs_i2c_send_buffer(uchar chip, u8 *data, int len, bool hold_bus,
int read)
#endif
{
while (len) {
int transfer = min(len, 2);
bool is_last = len <= transfer;
#ifdef CONFIG_DM_I2C
if (ihs_i2c_transfer(dev, chip, data, transfer, read,
hold_bus ? false : is_last))
return 1;
#else
if (ihs_i2c_transfer(chip, data, transfer, read,
hold_bus ? false : is_last))
return 1;
#endif
data += transfer;
len -= transfer;
}
return 0;
}
#ifdef CONFIG_DM_I2C
static int ihs_i2c_address(struct udevice *dev, uchar chip, u8 *addr, int alen,
bool hold_bus)
#else
static int ihs_i2c_address(uchar chip, u8 *addr, int alen, bool hold_bus)
#endif
{
#ifdef CONFIG_DM_I2C
return ihs_i2c_send_buffer(dev, chip, addr, alen, hold_bus, I2COP_WRITE);
#else
return ihs_i2c_send_buffer(chip, addr, alen, hold_bus, I2COP_WRITE);
#endif
}
#ifdef CONFIG_DM_I2C
static int ihs_i2c_access(struct udevice *dev, uchar chip, u8 *addr,
int alen, uchar *buffer, int len, int read)
#else
static int ihs_i2c_access(struct i2c_adapter *adap, uchar chip, u8 *addr,
int alen, uchar *buffer, int len, int read)
#endif
{
/* Don't hold the bus if length of data to send/receive is zero */
#ifdef CONFIG_DM_I2C
if (len <= 0 || ihs_i2c_address(dev, chip, addr, alen, len))
return 1;
#else
if (len <= 0 || ihs_i2c_address(chip, addr, alen, len))
return 1;
#endif
#ifdef CONFIG_DM_I2C
return ihs_i2c_send_buffer(dev, chip, buffer, len, false, read);
#else
return ihs_i2c_send_buffer(chip, buffer, len, false, read);
#endif
}
#ifdef CONFIG_DM_I2C
int ihs_i2c_probe(struct udevice *bus)
{
struct ihs_i2c_priv *priv = dev_get_priv(bus);
int addr;
addr = dev_read_u32_default(bus, "reg", -1);
priv->addr = addr;
return 0;
}
static int ihs_i2c_set_bus_speed(struct udevice *bus, uint speed)
{
struct ihs_i2c_priv *priv = dev_get_priv(bus);
if (speed != priv->speed && priv->speed != 0)
return 1;
priv->speed = speed;
return 0;
}
static int ihs_i2c_xfer(struct udevice *bus, struct i2c_msg *msg, int nmsgs)
{
struct i2c_msg *dmsg, *omsg, dummy;
memset(&dummy, 0, sizeof(struct i2c_msg));
/* We expect either two messages (one with an offset and one with the
* actucal data) or one message (just data)
*/
if (nmsgs > 2 || nmsgs == 0) {
debug("%s: Only one or two messages are supported.", __func__);
return -1;
}
omsg = nmsgs == 1 ? &dummy : msg;
dmsg = nmsgs == 1 ? msg : msg + 1;
if (dmsg->flags & I2C_M_RD)
return ihs_i2c_access(bus, dmsg->addr, omsg->buf,
omsg->len, dmsg->buf, dmsg->len,
I2COP_READ);
else
return ihs_i2c_access(bus, dmsg->addr, omsg->buf,
omsg->len, dmsg->buf, dmsg->len,
I2COP_WRITE);
}
static int ihs_i2c_probe_chip(struct udevice *bus, u32 chip_addr,
u32 chip_flags)
{
uchar buffer[2];
if (ihs_i2c_transfer(bus, chip_addr, buffer, 0, I2COP_READ, true))
return 1;
return 0;
}
static const struct dm_i2c_ops ihs_i2c_ops = {
.xfer = ihs_i2c_xfer,
.probe_chip = ihs_i2c_probe_chip,
.set_bus_speed = ihs_i2c_set_bus_speed,
};
static const struct udevice_id ihs_i2c_ids[] = {
{ .compatible = "gdsys,ihs_i2cmaster", },
{ /* sentinel */ }
};
U_BOOT_DRIVER(i2c_ihs) = {
.name = "i2c_ihs",
.id = UCLASS_I2C,
.of_match = ihs_i2c_ids,
.probe = ihs_i2c_probe,
.priv_auto_alloc_size = sizeof(struct ihs_i2c_priv),
.ops = &ihs_i2c_ops,
};
#else /* CONFIG_DM_I2C */
static void ihs_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr)
{
#ifdef CONFIG_SYS_I2C_INIT_BOARD
/*
* Call board specific i2c bus reset routine before accessing the
* environment, which might be in a chip on that bus. For details
* about this problem see doc/I2C_Edge_Conditions.
*/
i2c_init_board();
#endif
}
static int ihs_i2c_probe(struct i2c_adapter *adap, uchar chip)
{
uchar buffer[2];
if (ihs_i2c_transfer(chip, buffer, 0, I2COP_READ, true))
return 1;
return 0;
}
static int ihs_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
int alen, uchar *buffer, int len)
{
u8 addr_bytes[4];
put_unaligned_le32(addr, addr_bytes);
return ihs_i2c_access(adap, chip, addr_bytes, alen, buffer, len,
I2COP_READ);
}
static int ihs_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr,
int alen, uchar *buffer, int len)
{
u8 addr_bytes[4];
put_unaligned_le32(addr, addr_bytes);
return ihs_i2c_access(adap, chip, addr_bytes, alen, buffer, len,
I2COP_WRITE);
}
static unsigned int ihs_i2c_set_bus_speed(struct i2c_adapter *adap,
unsigned int speed)
{
if (speed != adap->speed)
return 1;
return speed;
}
/*
* Register IHS i2c adapters
*/
#ifdef CONFIG_SYS_I2C_IHS_CH0
U_BOOT_I2C_ADAP_COMPLETE(ihs0, ihs_i2c_init, ihs_i2c_probe,
ihs_i2c_read, ihs_i2c_write,
ihs_i2c_set_bus_speed,
CONFIG_SYS_I2C_IHS_SPEED_0,
CONFIG_SYS_I2C_IHS_SLAVE_0, 0)
#ifdef CONFIG_SYS_I2C_IHS_DUAL
U_BOOT_I2C_ADAP_COMPLETE(ihs0_1, ihs_i2c_init, ihs_i2c_probe,
ihs_i2c_read, ihs_i2c_write,
ihs_i2c_set_bus_speed,
CONFIG_SYS_I2C_IHS_SPEED_0_1,
CONFIG_SYS_I2C_IHS_SLAVE_0_1, 16)
#endif
#endif
#ifdef CONFIG_SYS_I2C_IHS_CH1
U_BOOT_I2C_ADAP_COMPLETE(ihs1, ihs_i2c_init, ihs_i2c_probe,
ihs_i2c_read, ihs_i2c_write,
ihs_i2c_set_bus_speed,
CONFIG_SYS_I2C_IHS_SPEED_1,
CONFIG_SYS_I2C_IHS_SLAVE_1, 1)
#ifdef CONFIG_SYS_I2C_IHS_DUAL
U_BOOT_I2C_ADAP_COMPLETE(ihs1_1, ihs_i2c_init, ihs_i2c_probe,
ihs_i2c_read, ihs_i2c_write,
ihs_i2c_set_bus_speed,
CONFIG_SYS_I2C_IHS_SPEED_1_1,
CONFIG_SYS_I2C_IHS_SLAVE_1_1, 17)
#endif
#endif
#ifdef CONFIG_SYS_I2C_IHS_CH2
U_BOOT_I2C_ADAP_COMPLETE(ihs2, ihs_i2c_init, ihs_i2c_probe,
ihs_i2c_read, ihs_i2c_write,
ihs_i2c_set_bus_speed,
CONFIG_SYS_I2C_IHS_SPEED_2,
CONFIG_SYS_I2C_IHS_SLAVE_2, 2)
#ifdef CONFIG_SYS_I2C_IHS_DUAL
U_BOOT_I2C_ADAP_COMPLETE(ihs2_1, ihs_i2c_init, ihs_i2c_probe,
ihs_i2c_read, ihs_i2c_write,
ihs_i2c_set_bus_speed,
CONFIG_SYS_I2C_IHS_SPEED_2_1,
CONFIG_SYS_I2C_IHS_SLAVE_2_1, 18)
#endif
#endif
#ifdef CONFIG_SYS_I2C_IHS_CH3
U_BOOT_I2C_ADAP_COMPLETE(ihs3, ihs_i2c_init, ihs_i2c_probe,
ihs_i2c_read, ihs_i2c_write,
ihs_i2c_set_bus_speed,
CONFIG_SYS_I2C_IHS_SPEED_3,
CONFIG_SYS_I2C_IHS_SLAVE_3, 3)
#ifdef CONFIG_SYS_I2C_IHS_DUAL
U_BOOT_I2C_ADAP_COMPLETE(ihs3_1, ihs_i2c_init, ihs_i2c_probe,
ihs_i2c_read, ihs_i2c_write,
ihs_i2c_set_bus_speed,
CONFIG_SYS_I2C_IHS_SPEED_3_1,
CONFIG_SYS_I2C_IHS_SLAVE_3_1, 19)
#endif
#endif
#endif /* CONFIG_DM_I2C */