upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
134 lines
3.0 KiB
134 lines
3.0 KiB
/*
|
|
* Copyright (C) 2013 Renesas Solutions Corp.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
|
|
#define CONFIG_SPI_ADDR 0x00000000
|
|
#define PHYADDR(_addr) ((_addr & 0x1fffffff) | 0x40000000)
|
|
#define CONFIG_RAM_BOOT_PHYS PHYADDR(CONFIG_SYS_TEXT_BASE)
|
|
|
|
#define SPIWDMADR 0xFE001018
|
|
#define SPIWDMCNTR 0xFE001020
|
|
#define SPIDMCOR 0xFE001028
|
|
#define SPIDMINTSR 0xFE001188
|
|
#define SPIDMINTMR 0xFE001190
|
|
|
|
#define SPIDMINTSR_DMEND 0x00000004
|
|
|
|
#define TBR 0xFE002000
|
|
#define RBR 0xFE002000
|
|
|
|
#define CR1 0xFE002008
|
|
#define CR2 0xFE002010
|
|
#define CR3 0xFE002018
|
|
#define CR4 0xFE002020
|
|
#define CR7 0xFE002038
|
|
#define CR8 0xFE002040
|
|
|
|
/* CR1 */
|
|
#define SPI_TBE 0x80
|
|
#define SPI_TBF 0x40
|
|
#define SPI_RBE 0x20
|
|
#define SPI_RBF 0x10
|
|
#define SPI_PFONRD 0x08
|
|
#define SPI_SSDB 0x04
|
|
#define SPI_SSD 0x02
|
|
#define SPI_SSA 0x01
|
|
|
|
/* CR2 */
|
|
#define SPI_RSTF 0x80
|
|
#define SPI_LOOPBK 0x40
|
|
#define SPI_CPOL 0x20
|
|
#define SPI_CPHA 0x10
|
|
#define SPI_L1M0 0x08
|
|
|
|
/* CR4 */
|
|
#define SPI_TBEI 0x80
|
|
#define SPI_TBFI 0x40
|
|
#define SPI_RBEI 0x20
|
|
#define SPI_RBFI 0x10
|
|
#define SPI_SpiS0 0x02
|
|
#define SPI_SSS 0x01
|
|
|
|
/* CR7 */
|
|
#define CR7_IDX_OR12 0x12
|
|
#define OR12_ADDR32 0x00000001
|
|
|
|
#define spi_write(val, addr) (*(volatile unsigned long *)(addr)) = val
|
|
#define spi_read(addr) (*(volatile unsigned long *)(addr))
|
|
|
|
/* M25P80 */
|
|
#define M25_READ 0x03
|
|
#define M25_READ_4BYTE 0x13
|
|
|
|
extern void bss_start(void);
|
|
|
|
#define __uses_spiboot2 __attribute__((section(".spiboot2.text")))
|
|
static void __uses_spiboot2 spi_reset(void)
|
|
{
|
|
int timeout = 0x00100000;
|
|
|
|
/* Make sure the last transaction is finalized */
|
|
spi_write(0x00, CR3);
|
|
spi_write(0x02, CR1);
|
|
while (!(spi_read(CR4) & SPI_SpiS0)) {
|
|
if (timeout-- < 0)
|
|
break;
|
|
}
|
|
spi_write(0x00, CR1);
|
|
|
|
spi_write(spi_read(CR2) | SPI_RSTF, CR2); /* fifo reset */
|
|
spi_write(spi_read(CR2) & ~SPI_RSTF, CR2);
|
|
|
|
spi_write(0, SPIDMCOR);
|
|
}
|
|
|
|
static void __uses_spiboot2 spi_read_flash(void *buf, unsigned long addr,
|
|
unsigned long len)
|
|
{
|
|
spi_write(CR7_IDX_OR12, CR7);
|
|
if (spi_read(CR8) & OR12_ADDR32) {
|
|
/* 4-bytes address mode */
|
|
spi_write(M25_READ_4BYTE, TBR);
|
|
spi_write((addr >> 24) & 0xFF, TBR); /* ADDR31-24 */
|
|
} else {
|
|
/* 3-bytes address mode */
|
|
spi_write(M25_READ, TBR);
|
|
}
|
|
spi_write((addr >> 16) & 0xFF, TBR); /* ADDR23-16 */
|
|
spi_write((addr >> 8) & 0xFF, TBR); /* ADDR15-8 */
|
|
spi_write(addr & 0xFF, TBR); /* ADDR7-0 */
|
|
|
|
spi_write(SPIDMINTSR_DMEND, SPIDMINTSR);
|
|
spi_write((unsigned long)buf, SPIWDMADR);
|
|
spi_write(len & 0xFFFFFFE0, SPIWDMCNTR);
|
|
spi_write(1, SPIDMCOR);
|
|
|
|
spi_write(0xff, CR3);
|
|
spi_write(spi_read(CR1) | SPI_SSDB, CR1);
|
|
spi_write(spi_read(CR1) | SPI_SSA, CR1);
|
|
|
|
while (!(spi_read(SPIDMINTSR) & SPIDMINTSR_DMEND))
|
|
;
|
|
|
|
/* Nagate SP0-SS0 */
|
|
spi_write(0, CR1);
|
|
}
|
|
|
|
void __uses_spiboot2 spiboot_main(void)
|
|
{
|
|
/*
|
|
* This code rounds len up for SPIWDMCNTR. We should set it to 0 in
|
|
* lower 5-bits.
|
|
*/
|
|
void (*_start)(void) = (void *)CONFIG_SYS_TEXT_BASE;
|
|
volatile unsigned long len = (bss_start - _start + 31) & 0xffffffe0;
|
|
|
|
spi_reset();
|
|
spi_read_flash((void *)CONFIG_RAM_BOOT_PHYS, CONFIG_SPI_ADDR, len);
|
|
|
|
_start();
|
|
}
|
|
|