upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/arch/powerpc/cpu/mpc824x/drivers/epic/epic1.c

517 lines
15 KiB

/**************************************************
*
* copyright @ motorola, 1999
*
*************************************************/
#include <mpc824x.h>
#include <common.h>
#include "epic.h"
#define PRINT(format, args...) printf(format , ## args)
typedef void (*VOIDFUNCPTR) (void); /* ptr to function returning void */
struct SrcVecTable SrcVecTable[MAXVEC] = /* Addr/Vector cross-reference tbl */
{
{ EPIC_EX_INT0_VEC_REG, "External Direct/Serial Source 0"},
{ EPIC_EX_INT1_VEC_REG, "External Direct/Serial Source 1"},
{ EPIC_EX_INT2_VEC_REG, "External Direct/Serial Source 2"},
{ EPIC_EX_INT3_VEC_REG, "External Direct/Serial Source 3"},
{ EPIC_EX_INT4_VEC_REG, "External Direct/Serial Source 4"},
{ EPIC_SR_INT5_VEC_REG, "External Serial Source 5"},
{ EPIC_SR_INT6_VEC_REG, "External Serial Source 6"},
{ EPIC_SR_INT7_VEC_REG, "External Serial Source 7"},
{ EPIC_SR_INT8_VEC_REG, "External Serial Source 8"},
{ EPIC_SR_INT9_VEC_REG, "External Serial Source 9"},
{ EPIC_SR_INT10_VEC_REG, "External Serial Source 10"},
{ EPIC_SR_INT11_VEC_REG, "External Serial Source 11"},
{ EPIC_SR_INT12_VEC_REG, "External Serial Source 12"},
{ EPIC_SR_INT13_VEC_REG, "External Serial Source 13"},
{ EPIC_SR_INT14_VEC_REG, "External Serial Source 14"},
{ EPIC_SR_INT15_VEC_REG, "External Serial Source 15"},
{ EPIC_I2C_INT_VEC_REG, "Internal I2C Source"},
{ EPIC_DMA0_INT_VEC_REG, "Internal DMA0 Source"},
{ EPIC_DMA1_INT_VEC_REG, "Internal DMA1 Source"},
{ EPIC_MSG_INT_VEC_REG, "Internal Message Source"},
};
VOIDFUNCPTR intVecTbl[MAXVEC]; /* Interrupt vector table */
/****************************************************************************
* epicInit - Initialize the EPIC registers
*
* This routine resets the Global Configuration Register, thus it:
* - Disables all interrupts
* - Sets epic registers to reset values
* - Sets the value of the Processor Current Task Priority to the
* highest priority (0xF).
* epicInit then sets the EPIC operation mode to Mixed Mode (vs. Pass
* Through or 8259 compatible mode).
*
* If IRQType (input) is Direct IRQs:
* - IRQType is written to the SIE bit of the EPIC Interrupt
* Configuration register (ICR).
* - clkRatio is ignored.
* If IRQType is Serial IRQs:
* - both IRQType and clkRatio will be written to the ICR register
*/
void epicInit
(
unsigned int IRQType, /* Direct or Serial */
unsigned int clkRatio /* Clk Ratio for Serial IRQs */
)
{
ULONG tmp;
tmp = sysEUMBBARRead(EPIC_GLOBAL_REG);
tmp |= 0xa0000000; /* Set the Global Conf. register */
sysEUMBBARWrite(EPIC_GLOBAL_REG, tmp);
/*
* Wait for EPIC to reset - CLH
*/
while( (sysEUMBBARRead(EPIC_GLOBAL_REG) & 0x80000000) == 1);
sysEUMBBARWrite(EPIC_GLOBAL_REG, 0x20000000);
tmp = sysEUMBBARRead(EPIC_INT_CONF_REG); /* Read interrupt conf. reg */
if (IRQType == EPIC_DIRECT_IRQ) /* direct mode */
sysEUMBBARWrite(EPIC_INT_CONF_REG, tmp & 0xf7ffffff);
else /* Serial mode */
{
tmp = (clkRatio << 28) | 0x08000000; /* Set clock ratio */
sysEUMBBARWrite(EPIC_INT_CONF_REG, tmp);
}
while (epicIntAck() != 0xff) /* Clear all pending interrupts */
epicEOI();
}
/****************************************************************************
* epicIntEnable - Enable an interrupt source
*
* This routine clears the mask bit of an external, an internal or
* a Timer register to enable the interrupt.
*
* RETURNS: None
*/
void epicIntEnable(int intVec)
{
ULONG tmp;
ULONG srAddr;
srAddr = SrcVecTable[intVec].srcAddr; /* Retrieve src Vec/Prio register */
tmp = sysEUMBBARRead(srAddr);
tmp &= ~EPIC_VEC_PRI_MASK; /* Clear the mask bit */
tmp |= (EPIC_VEC_PRI_DFLT_PRI << 16); /* Set priority to Default - CLH */
tmp |= intVec; /* Set Vector number */
sysEUMBBARWrite(srAddr, tmp);
return;
}
/****************************************************************************
* epicIntDisable - Disable an interrupt source
*
* This routine sets the mask bit of an external, an internal or
* a Timer register to disable the interrupt.
*
* RETURNS: OK or ERROR
*
*/
void epicIntDisable
(
int intVec /* Interrupt vector number */
)
{
ULONG tmp, srAddr;
srAddr = SrcVecTable[intVec].srcAddr;
tmp = sysEUMBBARRead(srAddr);
tmp |= 0x80000000; /* Set the mask bit */
sysEUMBBARWrite(srAddr, tmp);
return;
}
/****************************************************************************
* epicIntSourceConfig - Set properties of an interrupt source
*
* This function sets interrupt properites (Polarity, Sense, Interrupt
* Prority, and Interrupt Vector) of an Interrupt Source. The properties
* can be set when the current source is not in-request or in-service,
* which is determined by the Activity bit. This routine return ERROR
* if the the Activity bit is 1 (in-request or in-service).
*
* This function assumes that the Source Vector/Priority register (input)
* is a valid address.
*
* RETURNS: OK or ERROR
*/
int epicIntSourceConfig
(
int Vect, /* interrupt source vector number */
int Polarity, /* interrupt source polarity */
int Sense, /* interrupt source Sense */
int Prio /* interrupt source priority */
)
{
ULONG tmp, newVal;
ULONG actBit, srAddr;
srAddr = SrcVecTable[Vect].srcAddr;
tmp = sysEUMBBARRead(srAddr);
actBit = (tmp & 40000000) >> 30; /* retrieve activity bit - bit 30 */
if (actBit == 1)
return ERROR;
tmp &= 0xff30ff00; /* Erase previously set P,S,Prio,Vector bits */
newVal = (Polarity << 23) | (Sense << 22) | (Prio << 16) | Vect;
sysEUMBBARWrite(srAddr, tmp | newVal );
return (OK);
}
/****************************************************************************
* epicIntAck - acknowledge an interrupt
*
* This function reads the Interrupt acknowldge register and return
* the vector number of the highest pending interrupt.
*
* RETURNS: Interrupt Vector number.
*/
unsigned int epicIntAck(void)
{
return(sysEUMBBARRead( EPIC_PROC_INT_ACK_REG ));
}
/****************************************************************************
* epicEOI - signal an end of interrupt
*
* This function writes 0x0 to the EOI register to signal end of interrupt.
* It is usually called after an interrupt routine is served.
*
* RETURNS: None
*/
void epicEOI(void)
{
sysEUMBBARWrite(EPIC_PROC_EOI_REG, 0x0);
}
/****************************************************************************
* epicCurTaskPrioSet - sets the priority of the Processor Current Task
*
* This function should be called after epicInit() to lower the priority
* of the processor current task.
*
* RETURNS: OK or ERROR
*/
int epicCurTaskPrioSet
(
int prioNum /* New priority value */
)
{
if ( (prioNum < 0) || (prioNum > 0xF))
return ERROR;
sysEUMBBARWrite(EPIC_PROC_CTASK_PRI_REG, prioNum);
return OK;
}
/************************************************************************
* function: epicIntTaskGet
*
* description: Get value of processor current interrupt task priority register
*
* note:
***********************************************************************/
unsigned char epicIntTaskGet()
{
/* get the interrupt task priority register */
ULONG reg;
unsigned char rec;
reg = sysEUMBBARRead( EPIC_PROC_CTASK_PRI_REG );
rec = ( reg & 0x0F );
return rec;
}
/**************************************************************
* function: epicISR
*
* description: EPIC service routine called by the core exception
* at 0x500
*
* note:
**************************************************************/
unsigned int epicISR(void)
{
return 0;
}
/************************************************************
* function: epicModeGet
*
* description: query EPIC mode, return 0 if pass through mode
* return 1 if mixed mode
*
* note:
*************************************************************/
unsigned int epicModeGet(void)
{
ULONG val;
val = sysEUMBBARRead( EPIC_GLOBAL_REG );
return (( val & 0x20000000 ) >> 29);
}
/*********************************************
* function: epicConfigGet
*
* description: Get the EPIC interrupt Configuration
* return 0 if not error, otherwise return 1
*
* note:
********************************************/
void epicConfigGet( unsigned int *clkRatio, unsigned int *serEnable)
{
ULONG val;
val = sysEUMBBARRead( EPIC_INT_CONF_REG );
*clkRatio = ( val & 0x70000000 ) >> 28;
*serEnable = ( val & 0x8000000 ) >> 27;
}
/*******************************************************************
* sysEUMBBARRead - Read a 32-bit EUMBBAR register
*
* This routine reads the content of a register in the Embedded
* Utilities Memory Block, and swaps to big endian before returning
* the value.
*
* RETURNS: The content of the specified EUMBBAR register.
*/
ULONG sysEUMBBARRead
(
ULONG regNum
)
{
ULONG temp;
temp = *(ULONG *) (CONFIG_SYS_EUMB_ADDR + regNum);
return ( LONGSWAP(temp));
}
/*******************************************************************
* sysEUMBBARWrite - Write a 32-bit EUMBBAR register
*
* This routine swaps the value to little endian then writes it to
* a register in the Embedded Utilities Memory Block address space.
*
* RETURNS: N/A
*/
void sysEUMBBARWrite
(
ULONG regNum, /* EUMBBAR register address */
ULONG regVal /* Value to be written */
)
{
*(ULONG *) (CONFIG_SYS_EUMB_ADDR + regNum) = LONGSWAP(regVal);
return ;
}
/********************************************************
* function: epicVendorId
*
* description: return the EPIC Vendor Identification
* register:
*
* siliccon version, device id, and vendor id
*
* note:
********************************************************/
void epicVendorId
(
unsigned int *step,
unsigned int *devId,
unsigned int *venId
)
{
ULONG val;
val = sysEUMBBARRead( EPIC_VENDOR_ID_REG );
*step = ( val & 0x00FF0000 ) >> 16;
*devId = ( val & 0x0000FF00 ) >> 8;
*venId = ( val & 0x000000FF );
}
/**************************************************
* function: epicFeatures
*
* description: return the number of IRQ supported,
* number of CPU, and the version of the
* OpenEPIC
*
* note:
*************************************************/
void epicFeatures
(
unsigned int *noIRQs,
unsigned int *noCPUs,
unsigned int *verId
)
{
ULONG val;
val = sysEUMBBARRead( EPIC_FEATURES_REG );
*noIRQs = ( val & 0x07FF0000 ) >> 16;
*noCPUs = ( val & 0x00001F00 ) >> 8;
*verId = ( val & 0x000000FF );
}
/*********************************************************
* function: epciTmFrequncySet
*
* description: Set the timer frequency reporting register
********************************************************/
void epicTmFrequencySet( unsigned int frq )
{
sysEUMBBARWrite(EPIC_TM_FREQ_REG, frq);
}
/*******************************************************
* function: epicTmFrequncyGet
*
* description: Get the current value of the Timer Frequency
* Reporting register
*
******************************************************/
unsigned int epicTmFrequencyGet(void)
{
return( sysEUMBBARRead(EPIC_TM_FREQ_REG)) ;
}
/****************************************************
* function: epicTmBaseSet
*
* description: Set the #n global timer base count register
* return 0 if no error, otherwise return 1.
*
* note:
****************************************************/
unsigned int epicTmBaseSet
(
ULONG srcAddr, /* Address of the Timer Base register */
unsigned int cnt, /* Base count */
unsigned int inhibit /* 1 - count inhibit */
)
{
unsigned int val = 0x80000000;
/* First inhibit counting the timer */
sysEUMBBARWrite(srcAddr, val) ;
/* set the new value */
val = (cnt & 0x7fffffff) | ((inhibit & 0x1) << 31);
sysEUMBBARWrite(srcAddr, val) ;
return 0;
}
/***********************************************************************
* function: epicTmBaseGet
*
* description: Get the current value of the global timer base count register
* return 0 if no error, otherwise return 1.
*
* note:
***********************************************************************/
unsigned int epicTmBaseGet( ULONG srcAddr, unsigned int *val )
{
*val = sysEUMBBARRead( srcAddr );
*val = *val & 0x7fffffff;
return 0;
}
/***********************************************************
* function: epicTmCountGet
*
* description: Get the value of a given global timer
* current count register
* return 0 if no error, otherwise return 1
* note:
**********************************************************/
unsigned int epicTmCountGet( ULONG srcAddr, unsigned int *val )
{
*val = sysEUMBBARRead( srcAddr );
*val = *val & 0x7fffffff;
return 0;
}
/***********************************************************
* function: epicTmInhibit
*
* description: Stop counting of a given global timer
* return 0 if no error, otherwise return 1
*
* note:
***********************************************************/
unsigned int epicTmInhibit( unsigned int srcAddr )
{
ULONG val;
val = sysEUMBBARRead( srcAddr );
val |= 0x80000000;
sysEUMBBARWrite( srcAddr, val );
return 0;
}
/******************************************************************
* function: epicTmEnable
*
* description: Enable counting of a given global timer
* return 0 if no error, otherwise return 1
*
* note:
*****************************************************************/
unsigned int epicTmEnable( ULONG srcAddr )
{
ULONG val;
val = sysEUMBBARRead( srcAddr );
val &= 0x7fffffff;
sysEUMBBARWrite( srcAddr, val );
return 0;
}
void epicSourcePrint(int Vect)
{
ULONG srcVal;
srcVal = sysEUMBBARRead(SrcVecTable[Vect].srcAddr);
PRINT("%s\n", SrcVecTable[Vect].srcName);
PRINT("Address = 0x%lx\n", SrcVecTable[Vect].srcAddr);
PRINT("Vector = %ld\n", (srcVal & 0x000000FF) );
PRINT("Mask = %ld\n", srcVal >> 31);
PRINT("Activitiy = %ld\n", (srcVal & 40000000) >> 30);
PRINT("Polarity = %ld\n", (srcVal & 0x00800000) >> 23);
PRINT("Sense = %ld\n", (srcVal & 0x00400000) >> 22);
PRINT("Priority = %ld\n", (srcVal & 0x000F0000) >> 16);
}