upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/drivers/i2c/ast_i2c.c

357 lines
8.0 KiB

/*
* Copyright (C) 2012-2020 ASPEED Technology Inc.
* Copyright 2016 IBM Corporation
* Copyright 2017 Google, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <clk.h>
#include <dm.h>
#include <errno.h>
#include <fdtdec.h>
#include <i2c.h>
#include <asm/io.h>
#include <asm/arch/scu_ast2500.h>
#include "ast_i2c.h"
#define I2C_TIMEOUT_US 100000
#define I2C_SLEEP_STEP_US 20
#define HIGHSPEED_TTIMEOUT 3
DECLARE_GLOBAL_DATA_PTR;
/*
* Device private data
*/
struct ast_i2c_priv {
/* This device's clock */
struct clk clk;
/* Device registers */
struct ast_i2c_regs *regs;
/* I2C speed in Hz */
int speed;
};
/*
* Given desired divider ratio, return the value that needs to be set
* in Clock and AC Timing Control register
*/
static u32 get_clk_reg_val(ulong divider_ratio)
{
ulong inc = 0, div;
ulong scl_low, scl_high, data;
for (div = 0; divider_ratio >= 16; div++) {
inc |= (divider_ratio & 1);
divider_ratio >>= 1;
}
divider_ratio += inc;
scl_low = (divider_ratio >> 1) - 1;
scl_high = divider_ratio - scl_low - 2;
data = I2CD_CACTC_BASE
| (scl_high << I2CD_TCKHIGH_SHIFT)
| (scl_low << I2CD_TCKLOW_SHIFT)
| (div << I2CD_BASE_DIV_SHIFT);
return data;
}
static void ast_i2c_clear_interrupts(struct udevice *dev)
{
struct ast_i2c_priv *priv = dev_get_priv(dev);
writel(~0, &priv->regs->isr);
}
static void ast_i2c_init_bus(struct udevice *dev)
{
struct ast_i2c_priv *priv = dev_get_priv(dev);
/* Reset device */
writel(0, &priv->regs->fcr);
/* Enable Master Mode. Assuming single-master */
writel(I2CD_MASTER_EN
| I2CD_M_SDA_LOCK_EN
| I2CD_MULTI_MASTER_DIS | I2CD_M_SCL_DRIVE_EN,
&priv->regs->fcr);
/* Enable Interrupts */
writel(I2CD_INTR_TX_ACK
| I2CD_INTR_TX_NAK
| I2CD_INTR_RX_DONE
| I2CD_INTR_BUS_RECOVER_DONE
| I2CD_INTR_NORMAL_STOP
| I2CD_INTR_ABNORMAL, &priv->regs->icr);
}
static int ast_i2c_ofdata_to_platdata(struct udevice *dev)
{
struct ast_i2c_priv *priv = dev_get_priv(dev);
int ret;
priv->regs = devfdt_get_addr_ptr(dev);
if (IS_ERR(priv->regs))
return PTR_ERR(priv->regs);
ret = clk_get_by_index(dev, 0, &priv->clk);
if (ret < 0) {
debug("%s: Can't get clock for %s: %d\n", __func__, dev->name,
ret);
return ret;
}
return 0;
}
static int ast_i2c_probe(struct udevice *dev)
{
struct ast2500_scu *scu;
debug("Enabling I2C%u\n", dev->seq);
/*
* Get all I2C devices out of Reset.
* Only needs to be done once, but doing it for every
* device does not hurt.
*/
scu = ast_get_scu();
ast_scu_unlock(scu);
clrbits_le32(&scu->sysreset_ctrl1, SCU_SYSRESET_I2C);
ast_scu_lock(scu);
ast_i2c_init_bus(dev);
return 0;
}
static int ast_i2c_wait_isr(struct udevice *dev, u32 flag)
{
struct ast_i2c_priv *priv = dev_get_priv(dev);
int timeout = I2C_TIMEOUT_US;
while (!(readl(&priv->regs->isr) & flag) && timeout > 0) {
udelay(I2C_SLEEP_STEP_US);
timeout -= I2C_SLEEP_STEP_US;
}
ast_i2c_clear_interrupts(dev);
if (timeout <= 0)
return -ETIMEDOUT;
return 0;
}
static int ast_i2c_send_stop(struct udevice *dev)
{
struct ast_i2c_priv *priv = dev_get_priv(dev);
writel(I2CD_M_STOP_CMD, &priv->regs->csr);
return ast_i2c_wait_isr(dev, I2CD_INTR_NORMAL_STOP);
}
static int ast_i2c_wait_tx(struct udevice *dev)
{
struct ast_i2c_priv *priv = dev_get_priv(dev);
int timeout = I2C_TIMEOUT_US;
u32 flag = I2CD_INTR_TX_ACK | I2CD_INTR_TX_NAK;
u32 status = readl(&priv->regs->isr) & flag;
int ret = 0;
while (!status && timeout > 0) {
status = readl(&priv->regs->isr) & flag;
udelay(I2C_SLEEP_STEP_US);
timeout -= I2C_SLEEP_STEP_US;
}
if (status == I2CD_INTR_TX_NAK)
ret = -EREMOTEIO;
if (timeout <= 0)
ret = -ETIMEDOUT;
ast_i2c_clear_interrupts(dev);
return ret;
}
static int ast_i2c_start_txn(struct udevice *dev, uint devaddr)
{
struct ast_i2c_priv *priv = dev_get_priv(dev);
/* Start and Send Device Address */
writel(devaddr, &priv->regs->trbbr);
writel(I2CD_M_START_CMD | I2CD_M_TX_CMD, &priv->regs->csr);
return ast_i2c_wait_tx(dev);
}
static int ast_i2c_read_data(struct udevice *dev, u8 chip_addr, u8 *buffer,
size_t len, bool send_stop)
{
struct ast_i2c_priv *priv = dev_get_priv(dev);
u32 i2c_cmd = I2CD_M_RX_CMD;
int ret;
ret = ast_i2c_start_txn(dev, (chip_addr << 1) | I2C_M_RD);
if (ret < 0)
return ret;
for (; len > 0; len--, buffer++) {
if (len == 1)
i2c_cmd |= I2CD_M_S_RX_CMD_LAST;
writel(i2c_cmd, &priv->regs->csr);
ret = ast_i2c_wait_isr(dev, I2CD_INTR_RX_DONE);
if (ret < 0)
return ret;
*buffer = (readl(&priv->regs->trbbr) & I2CD_RX_DATA_MASK)
>> I2CD_RX_DATA_SHIFT;
}
ast_i2c_clear_interrupts(dev);
if (send_stop)
return ast_i2c_send_stop(dev);
return 0;
}
static int ast_i2c_write_data(struct udevice *dev, u8 chip_addr, u8
*buffer, size_t len, bool send_stop)
{
struct ast_i2c_priv *priv = dev_get_priv(dev);
int ret;
ret = ast_i2c_start_txn(dev, (chip_addr << 1));
if (ret < 0)
return ret;
for (; len > 0; len--, buffer++) {
writel(*buffer, &priv->regs->trbbr);
writel(I2CD_M_TX_CMD, &priv->regs->csr);
ret = ast_i2c_wait_tx(dev);
if (ret < 0)
return ret;
}
if (send_stop)
return ast_i2c_send_stop(dev);
return 0;
}
static int ast_i2c_deblock(struct udevice *dev)
{
struct ast_i2c_priv *priv = dev_get_priv(dev);
struct ast_i2c_regs *regs = priv->regs;
u32 csr = readl(&regs->csr);
bool sda_high = csr & I2CD_SDA_LINE_STS;
bool scl_high = csr & I2CD_SCL_LINE_STS;
int ret = 0;
if (sda_high && scl_high) {
/* Bus is idle, no deblocking needed. */
return 0;
} else if (sda_high) {
/* Send stop command */
debug("Unterminated TXN in (%x), sending stop\n", csr);
ret = ast_i2c_send_stop(dev);
} else if (scl_high) {
/* Possibly stuck slave */
debug("Bus stuck (%x), attempting recovery\n", csr);
writel(I2CD_BUS_RECOVER_CMD, &regs->csr);
ret = ast_i2c_wait_isr(dev, I2CD_INTR_BUS_RECOVER_DONE);
} else {
/* Just try to reinit the device. */
ast_i2c_init_bus(dev);
}
return ret;
}
static int ast_i2c_xfer(struct udevice *dev, struct i2c_msg *msg, int nmsgs)
{
int ret;
ret = ast_i2c_deblock(dev);
if (ret < 0)
return ret;
debug("i2c_xfer: %d messages\n", nmsgs);
for (; nmsgs > 0; nmsgs--, msg++) {
if (msg->flags & I2C_M_RD) {
debug("i2c_read: chip=0x%x, len=0x%x, flags=0x%x\n",
msg->addr, msg->len, msg->flags);
ret = ast_i2c_read_data(dev, msg->addr, msg->buf,
msg->len, (nmsgs == 1));
} else {
debug("i2c_write: chip=0x%x, len=0x%x, flags=0x%x\n",
msg->addr, msg->len, msg->flags);
ret = ast_i2c_write_data(dev, msg->addr, msg->buf,
msg->len, (nmsgs == 1));
}
if (ret) {
debug("%s: error (%d)\n", __func__, ret);
return -EREMOTEIO;
}
}
return 0;
}
static int ast_i2c_set_speed(struct udevice *dev, unsigned int speed)
{
struct ast_i2c_priv *priv = dev_get_priv(dev);
struct ast_i2c_regs *regs = priv->regs;
ulong i2c_rate, divider;
debug("Setting speed for I2C%d to <%u>\n", dev->seq, speed);
if (!speed) {
debug("No valid speed specified\n");
return -EINVAL;
}
i2c_rate = clk_get_rate(&priv->clk);
divider = i2c_rate / speed;
priv->speed = speed;
if (speed > I2C_HIGHSPEED_RATE) {
debug("Enable High Speed\n");
setbits_le32(&regs->fcr, I2CD_M_HIGH_SPEED_EN
| I2CD_M_SDA_DRIVE_1T_EN
| I2CD_SDA_DRIVE_1T_EN);
writel(HIGHSPEED_TTIMEOUT, &regs->cactcr2);
} else {
debug("Enabling Normal Speed\n");
writel(I2CD_NO_TIMEOUT_CTRL, &regs->cactcr2);
}
writel(get_clk_reg_val(divider), &regs->cactcr1);
ast_i2c_clear_interrupts(dev);
return 0;
}
static const struct dm_i2c_ops ast_i2c_ops = {
.xfer = ast_i2c_xfer,
.set_bus_speed = ast_i2c_set_speed,
.deblock = ast_i2c_deblock,
};
static const struct udevice_id ast_i2c_ids[] = {
{ .compatible = "aspeed,ast2400-i2c-bus" },
{ .compatible = "aspeed,ast2500-i2c-bus" },
{ },
};
U_BOOT_DRIVER(ast_i2c) = {
.name = "ast_i2c",
.id = UCLASS_I2C,
.of_match = ast_i2c_ids,
.probe = ast_i2c_probe,
.ofdata_to_platdata = ast_i2c_ofdata_to_platdata,
.priv_auto_alloc_size = sizeof(struct ast_i2c_priv),
.ops = &ast_i2c_ops,
};