upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
232 lines
6.6 KiB
232 lines
6.6 KiB
/*
|
|
* (C) Copyright 2009
|
|
* Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
|
|
*
|
|
* Based on board/amcc/canyonlands/canyonlands.c
|
|
* (C) Copyright 2008
|
|
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/ppc440.h>
|
|
#include <libfdt.h>
|
|
#include <fdt_support.h>
|
|
#include <i2c.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/io.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/4xx_pcie.h>
|
|
#include <asm/ppc4xx-gpio.h>
|
|
|
|
extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define CONFIG_SYS_BCSR3_PCIE 0x10
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
/*
|
|
* Setup the interrupt controller polarities, triggers, etc.
|
|
*/
|
|
mtdcr(UIC0SR, 0xffffffff); /* clear all */
|
|
mtdcr(UIC0ER, 0x00000000); /* disable all */
|
|
mtdcr(UIC0CR, 0x00000005); /* ATI & UIC1 crit are critical */
|
|
mtdcr(UIC0PR, 0xffffffff); /* per ref-board manual */
|
|
mtdcr(UIC0TR, 0x00000000); /* per ref-board manual */
|
|
mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 */
|
|
mtdcr(UIC0SR, 0xffffffff); /* clear all */
|
|
|
|
mtdcr(UIC1SR, 0xffffffff); /* clear all */
|
|
mtdcr(UIC1ER, 0x00000000); /* disable all */
|
|
mtdcr(UIC1CR, 0x00000000); /* all non-critical */
|
|
mtdcr(UIC1PR, 0xffffffff); /* per ref-board manual */
|
|
mtdcr(UIC1TR, 0x00000000); /* per ref-board manual */
|
|
mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 */
|
|
mtdcr(UIC1SR, 0xffffffff); /* clear all */
|
|
|
|
mtdcr(UIC2SR, 0xffffffff); /* clear all */
|
|
mtdcr(UIC2ER, 0x00000000); /* disable all */
|
|
mtdcr(UIC2CR, 0x00000000); /* all non-critical */
|
|
mtdcr(UIC2PR, 0xffffffff); /* per ref-board manual */
|
|
mtdcr(UIC2TR, 0x00000000); /* per ref-board manual */
|
|
mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 */
|
|
mtdcr(UIC2SR, 0xffffffff); /* clear all */
|
|
|
|
mtdcr(UIC3SR, 0xffffffff); /* clear all */
|
|
mtdcr(UIC3ER, 0x00000000); /* disable all */
|
|
mtdcr(UIC3CR, 0x00000000); /* all non-critical */
|
|
mtdcr(UIC3PR, 0xffffffff); /* per ref-board manual */
|
|
mtdcr(UIC3TR, 0x00000000); /* per ref-board manual */
|
|
mtdcr(UIC3VR, 0x00000000); /* int31 highest, base=0x000 */
|
|
mtdcr(UIC3SR, 0xffffffff); /* clear all */
|
|
|
|
/*
|
|
* Configure PFC (Pin Function Control) registers
|
|
* enable GPIO 49-63
|
|
* UART0: 4 pins
|
|
*/
|
|
mtsdr(SDR0_PFC0, 0x00007fff);
|
|
mtsdr(SDR0_PFC1, 0x00040000);
|
|
|
|
/* Enable PCI host functionality in SDR0_PCI0 */
|
|
mtsdr(SDR0_PCI0, 0xe0000000);
|
|
|
|
mtsdr(SDR0_SRST1, 0); /* Pull AHB out of reset default=1 */
|
|
|
|
/* Setup PLB4-AHB bridge based on the system address map */
|
|
mtdcr(AHB_TOP, 0x8000004B);
|
|
mtdcr(AHB_BOT, 0x8000004B);
|
|
|
|
/*
|
|
* Configure USB-STP pins as alternate and not GPIO
|
|
* It seems to be neccessary to configure the STP pins as GPIO
|
|
* input at powerup (perhaps while USB reset is asserted). So
|
|
* we configure those pins to their "real" function now.
|
|
*/
|
|
gpio_config(16, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);
|
|
gpio_config(19, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);
|
|
|
|
/* Trigger board component reset */
|
|
out_le16((void *)CONFIG_SYS_IO_BASE, 0xffff);
|
|
out_le16((void *)CONFIG_SYS_IO_BASE + 0x100, 0xffff);
|
|
udelay(50);
|
|
out_le16((void *)CONFIG_SYS_IO_BASE, 0xffbf);
|
|
out_le16((void *)CONFIG_SYS_IO_BASE + 0x100, 0xffbf);
|
|
udelay(50);
|
|
out_le16((void *)CONFIG_SYS_IO_BASE, 0xffff);
|
|
out_le16((void *)CONFIG_SYS_IO_BASE + 0x100, 0xffff);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int get_cpu_num(void)
|
|
{
|
|
int cpu = NA_OR_UNKNOWN_CPU;
|
|
|
|
return cpu;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
char buf[64];
|
|
int i = getenv_f("serial#", buf, sizeof(buf));
|
|
|
|
#ifdef CONFIG_DEVCONCENTER
|
|
printf("Board: DevCon-Center");
|
|
#else
|
|
printf("Board: Intip");
|
|
#endif
|
|
|
|
if (i > 0) {
|
|
puts(", serial# ");
|
|
puts(buf);
|
|
}
|
|
putc('\n');
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_early_init_r(void)
|
|
{
|
|
/*
|
|
* CompactCenter has 64MBytes, DevCon-Center 128MBytes of NOR FLASH
|
|
* (Spansion 29GL512), but the boot EBC mapping only supports a maximum
|
|
* of 16MBytes (4.ff00.0000 - 4.ffff.ffff).
|
|
* To solve this problem, the FLASH has to get remapped to another
|
|
* EBC address which accepts bigger regions:
|
|
*
|
|
* 0xfn00.0000 -> 4.cn00.0000
|
|
*/
|
|
|
|
u32 bxcr_bw = (CONFIG_SYS_FLASH_SIZE == 128 << 20) ?
|
|
EBC_BXCR_BS_128MB : EBC_BXCR_BS_64MB;
|
|
|
|
/* Remap the NOR FLASH to 0xcn00.0000 ... 0xcfff.ffff */
|
|
mtebc(PB0CR, CONFIG_SYS_FLASH_BASE_PHYS_L
|
|
| bxcr_bw
|
|
| EBC_BXCR_BU_RW
|
|
| EBC_BXCR_BW_16BIT);
|
|
|
|
/* Remove TLB entry of boot EBC mapping */
|
|
remove_tlb(CONFIG_SYS_BOOT_BASE_ADDR, 16 << 20);
|
|
|
|
/* Add TLB entry for 0xfn00.0000 -> 0x4.cn00.0000 */
|
|
program_tlb(CONFIG_SYS_FLASH_BASE_PHYS, CONFIG_SYS_FLASH_BASE,
|
|
CONFIG_SYS_FLASH_SIZE, TLB_WORD2_I_ENABLE);
|
|
|
|
/*
|
|
* Now accessing of the whole 64Mbytes of NOR FLASH at virtual address
|
|
* 0xfc00.0000 is possible
|
|
*/
|
|
|
|
/*
|
|
* Clear potential errors resulting from auto-calibration.
|
|
* If not done, then we could get an interrupt later on when
|
|
* exceptions are enabled.
|
|
*/
|
|
set_mcsr(get_mcsr());
|
|
|
|
return 0;
|
|
}
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
u32 sdr0_srst1 = 0;
|
|
u32 eth_cfg;
|
|
|
|
/*
|
|
* Set EMAC mode/configuration (GMII, SGMII, RGMII...).
|
|
* This is board specific, so let's do it here.
|
|
*/
|
|
mfsdr(SDR0_ETH_CFG, eth_cfg);
|
|
/* disable SGMII mode */
|
|
eth_cfg &= ~(SDR0_ETH_CFG_SGMII2_ENABLE |
|
|
SDR0_ETH_CFG_SGMII1_ENABLE |
|
|
SDR0_ETH_CFG_SGMII0_ENABLE);
|
|
/* Set the for 2 RGMII mode */
|
|
/* GMC0 EMAC4_0, GMC0 EMAC4_1, RGMII Bridge 0 */
|
|
eth_cfg &= ~SDR0_ETH_CFG_GMC0_BRIDGE_SEL;
|
|
eth_cfg |= SDR0_ETH_CFG_GMC1_BRIDGE_SEL;
|
|
mtsdr(SDR0_ETH_CFG, eth_cfg);
|
|
|
|
/*
|
|
* The AHB Bridge core is held in reset after power-on or reset
|
|
* so enable it now
|
|
*/
|
|
mfsdr(SDR0_SRST1, sdr0_srst1);
|
|
sdr0_srst1 &= ~SDR0_SRST1_AHB;
|
|
mtsdr(SDR0_SRST1, sdr0_srst1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
|
|
extern void __ft_board_setup(void *blob, bd_t *bd);
|
|
|
|
void ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
__ft_board_setup(blob, bd);
|
|
|
|
fdt_find_and_setprop(blob, "/plb/pciex@d00000000", "status",
|
|
"disabled", sizeof("disabled"), 1);
|
|
|
|
fdt_find_and_setprop(blob, "/plb/sata@bffd1000", "status",
|
|
"disabled", sizeof("disabled"), 1);
|
|
}
|
|
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
|
|
|