upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/include/faraday/ftsdc010.h

245 lines
9.2 KiB

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Faraday FTSDC010 Secure Digital Memory Card Host Controller
*
* Copyright (C) 2011 Andes Technology Corporation
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
*/
#ifndef __FTSDC010_H
#define __FTSDC010_H
#ifndef __ASSEMBLY__
/* sd controller register */
struct ftsdc010_mmc {
unsigned int cmd; /* 0x00 - command reg */
unsigned int argu; /* 0x04 - argument reg */
unsigned int rsp0; /* 0x08 - response reg0 */
unsigned int rsp1; /* 0x0c - response reg1 */
unsigned int rsp2; /* 0x10 - response reg2 */
unsigned int rsp3; /* 0x14 - response reg3 */
unsigned int rsp_cmd; /* 0x18 - responded cmd reg */
unsigned int dcr; /* 0x1c - data control reg */
unsigned int dtr; /* 0x20 - data timer reg */
unsigned int dlr; /* 0x24 - data length reg */
unsigned int status; /* 0x28 - status reg */
unsigned int clr; /* 0x2c - clear reg */
unsigned int int_mask; /* 0x30 - intrrupt mask reg */
unsigned int pcr; /* 0x34 - power control reg */
unsigned int ccr; /* 0x38 - clock contorl reg */
unsigned int bwr; /* 0x3c - bus width reg */
unsigned int dwr; /* 0x40 - data window reg */
#ifndef CONFIG_FTSDC010_SDIO
unsigned int feature; /* 0x44 - feature reg */
unsigned int rev; /* 0x48 - revision reg */
#else
unsigned int mmc_intr_time; /* 0x44 - MMC int resp time reg */
unsigned int gpo; /* 0x48 - gerenal purpose output */
unsigned int reserved[8]; /* 0x50 - 0x68 reserved */
unsigned int sdio_ctrl1; /* 0x6c - SDIO control reg 1 */
unsigned int sdio_ctrl2; /* 0x70 - SDIO control reg 2 */
unsigned int sdio_status; /* 0x74 - SDIO status regi */
unsigned int reserved1[9]; /* 0x78 - 0x98 reserved */
unsigned int feature; /* 0x9c - feature reg */
unsigned int rev; /* 0xa0 - revision reg */
#endif /* CONFIG_FTSDC010_SDIO */
};
struct mmc_host {
struct ftsdc010_mmc *reg;
unsigned int version; /* SDHCI spec. version */
unsigned int clock; /* Current clock (MHz) */
unsigned int fifo_len; /* bytes */
unsigned int last_opcode; /* Last OP Code */
unsigned int card_type; /* Card type */
};
/* functions */
int ftsdc010_mmc_init(int dev_index);
#endif /* __ASSEMBLY__ */
/* global defines */
#define FTSDC010_CMD_RETRY 0x100000
#define FTSDC010_PIO_RETRY 100 /* pio retry times */
#define FTSDC010_DELAY_UNIT 100 /* 100 us */
/* define from Linux kernel - include/linux/mmc/card.h */
#define MMC_TYPE_SDIO 2 /* SDIO card */
/* define for mmc layer */
#define MMC_DATA_BOTH_DIR (MMC_DATA_WRITE | MMC_DATA_READ)
/* this part is strange */
#define FTSDC010_SDIO_CTRL1_REG 0x0000006C
#define FTSDC010_SDIO_CTRL2_REG 0x0000006C
#define FTSDC010_SDIO_STATUS_REG 0x00000070
/* 0x00 - command register */
#define FTSDC010_CMD_IDX(x) (((x) & 0x3f) << 0)
#define FTSDC010_CMD_NEED_RSP (1 << 6)
#define FTSDC010_CMD_LONG_RSP (1 << 7)
#define FTSDC010_CMD_APP_CMD (1 << 8)
#define FTSDC010_CMD_CMD_EN (1 << 9)
#define FTSDC010_CMD_SDC_RST (1 << 10)
#define FTSDC010_CMD_MMC_INT_STOP (1 << 11)
/* 0x18 - responded command register */
#define FTSDC010_RSP_CMD_IDX(x) (((x) >> 0) & 0x3f)
#define FTSDC010_RSP_CMD_APP (1 << 6)
/* 0x1c - data control register */
#define FTSDC010_DCR_BLK_SIZE(x) (((x) & 0xf) << 0)
#define FTSDC010_DCR_DATA_WRITE (1 << 4)
#define FTSDC010_DCR_DMA_EN (1 << 5)
#define FTSDC010_DCR_DATA_EN (1 << 6)
#ifdef CONFIG_FTSDC010_SDIO
#define FTSDC010_DCR_FIFOTH (1 << 7)
#define FTSDC010_DCR_DMA_TYPE(x) (((x) & 0x3) << 8)
#define FTSDC010_DCR_FIFO_RST (1 << 10)
#endif /* CONFIG_FTSDC010_SDIO */
#define FTSDC010_DCR_DMA_TYPE_1 0x0 /* Single r/w */
#define FTSDC010_DCR_DMA_TYPE_4 0x1 /* Burst 4 r/w */
#define FTSDC010_DCR_DMA_TYPE_8 0x2 /* Burst 8 r/w */
#define FTSDC010_DCR_BLK_BYTES(x) (ffs(x) - 1) /* 1B - 2048B */
/* CPRM related define */
#define FTSDC010_CPRM_DATA_CHANGE_ENDIAN_EN 0x000008
#define FTSDC010_CPRM_DATA_SWAP_HL_EN 0x000010
/* 0x28 - status register */
#define FTSDC010_STATUS_RSP_CRC_FAIL (1 << 0)
#define FTSDC010_STATUS_DATA_CRC_FAIL (1 << 1)
#define FTSDC010_STATUS_RSP_TIMEOUT (1 << 2)
#define FTSDC010_STATUS_DATA_TIMEOUT (1 << 3)
#define FTSDC010_STATUS_RSP_CRC_OK (1 << 4)
#define FTSDC010_STATUS_DATA_CRC_OK (1 << 5)
#define FTSDC010_STATUS_CMD_SEND (1 << 6)
#define FTSDC010_STATUS_DATA_END (1 << 7)
#define FTSDC010_STATUS_FIFO_URUN (1 << 8)
#define FTSDC010_STATUS_FIFO_ORUN (1 << 9)
#define FTSDC010_STATUS_CARD_CHANGE (1 << 10)
#define FTSDC010_STATUS_CARD_DETECT (1 << 11)
#define FTSDC010_STATUS_WRITE_PROT (1 << 12)
#ifdef CONFIG_FTSDC010_SDIO
#define FTSDC010_STATUS_CP_READY (1 << 13) /* reserved ? */
#define FTSDC010_STATUS_CP_BUF_READY (1 << 14) /* reserved ? */
#define FTSDC010_STATUS_PLAIN_TEXT_READY (1 << 15) /* reserved ? */
#define FTSDC010_STATUS_SDIO_IRPT (1 << 16) /* SDIO card intr */
#define FTSDC010_STATUS_DATA0_STATUS (1 << 17)
#endif /* CONFIG_FTSDC010_SDIO */
#define FTSDC010_STATUS_RSP_ERROR \
(FTSDC010_STATUS_RSP_CRC_FAIL | FTSDC010_STATUS_RSP_TIMEOUT)
#define FTSDC010_STATUS_RSP_MASK \
(FTSDC010_STATUS_RSP_ERROR | FTSDC010_STATUS_RSP_CRC_OK)
#define FTSDC010_STATUS_DATA_ERROR \
(FTSDC010_STATUS_DATA_CRC_FAIL | FTSDC010_STATUS_DATA_TIMEOUT)
#define FTSDC010_STATUS_DATA_MASK \
(FTSDC010_STATUS_DATA_ERROR | FTSDC010_STATUS_DATA_CRC_OK \
| FTSDC010_STATUS_DATA_END)
/* 0x2c - clear register */
#define FTSDC010_CLR_RSP_CRC_FAIL (1 << 0)
#define FTSDC010_CLR_DATA_CRC_FAIL (1 << 1)
#define FTSDC010_CLR_RSP_TIMEOUT (1 << 2)
#define FTSDC010_CLR_DATA_TIMEOUT (1 << 3)
#define FTSDC010_CLR_RSP_CRC_OK (1 << 4)
#define FTSDC010_CLR_DATA_CRC_OK (1 << 5)
#define FTSDC010_CLR_CMD_SEND (1 << 6)
#define FTSDC010_CLR_DATA_END (1 << 7)
#define FTSDC010_STATUS_FIFO_URUN (1 << 8) /* reserved ? */
#define FTSDC010_STATUS_FIFO_ORUN (1 << 9) /* reserved ? */
#define FTSDC010_CLR_CARD_CHANGE (1 << 10)
#ifdef CONFIG_FTSDC010_SDIO
#define FTSDC010_CLR_SDIO_IRPT (1 << 16)
#endif /* CONFIG_FTSDC010_SDIO */
/* 0x30 - interrupt mask register */
#define FTSDC010_INT_MASK_RSP_CRC_FAIL (1 << 0)
#define FTSDC010_INT_MASK_DATA_CRC_FAIL (1 << 1)
#define FTSDC010_INT_MASK_RSP_TIMEOUT (1 << 2)
#define FTSDC010_INT_MASK_DATA_TIMEOUT (1 << 3)
#define FTSDC010_INT_MASK_RSP_CRC_OK (1 << 4)
#define FTSDC010_INT_MASK_DATA_CRC_OK (1 << 5)
#define FTSDC010_INT_MASK_CMD_SEND (1 << 6)
#define FTSDC010_INT_MASK_DATA_END (1 << 7)
#define FTSDC010_INT_MASK_FIFO_URUN (1 << 8)
#define FTSDC010_INT_MASK_FIFO_ORUN (1 << 9)
#define FTSDC010_INT_MASK_CARD_CHANGE (1 << 10)
#ifdef CONFIG_FTSDC010_SDIO
#define FTSDC010_INT_MASK_CP_READY (1 << 13)
#define FTSDC010_INT_MASK_CP_BUF_READY (1 << 14)
#define FTSDC010_INT_MASK_PLAIN_TEXT_READY (1 << 15)
#define FTSDC010_INT_MASK_SDIO_IRPT (1 << 16)
#define FTSDC010_STATUS_DATA0_STATUS (1 << 17)
#endif /* CONFIG_FTSDC010_SDIO */
/* ? */
#define FTSDC010_CARD_INSERT 0x0
#define FTSDC010_CARD_REMOVE FTSDC010_STATUS_REG_CARD_DETECT
/* 0x34 - power control register */
#define FTSDC010_PCR_POWER(x) (((x) & 0xf) << 0)
#define FTSDC010_PCR_POWER_ON (1 << 4)
/* 0x38 - clock control register */
#define FTSDC010_CCR_CLK_DIV(x) (((x) & 0x7f) << 0)
#define FTSDC010_CCR_CLK_SD (1 << 7) /* 0: MMC, 1: SD */
#define FTSDC010_CCR_CLK_DIS (1 << 8)
#define FTSDC010_CCR_CLK_HISPD (1 << 9) /* high speed */
/* card type */
#define FTSDC010_CARD_TYPE_SD FTSDC010_CLOCK_REG_CARD_TYPE
#define FTSDC010_CARD_TYPE_MMC 0x0
/* 0x3c - bus width register */
#define FTSDC010_BWR_MODE_1BIT (1 << 0) /* 1 bit mode enabled */
#define FTSDC010_BWR_MODE_8BIT (1 << 1) /* 8 bit mode enabled */
#define FTSDC010_BWR_MODE_4BIT (1 << 2) /* 4 bit mode enabled */
#define FTSDC010_BWR_MODE_MASK (7 << 0)
#define FTSDC010_BWR_MODE_SHIFT (0)
#define FTSDC010_BWR_CAPS_1BIT (0 << 3) /* 1 bits mode supported */
#define FTSDC010_BWR_CAPS_4BIT (1 << 3) /* 1,4 bits mode supported */
#define FTSDC010_BWR_CAPS_8BIT (2 << 3) /* 1,4,8 bits mode supported */
#define FTSDC010_BWR_CAPS_MASK (3 << 3)
#define FTSDC010_BWR_CAPS_SHIFT (3)
#define FTSDC010_BWR_CARD_DETECT (1 << 5)
/* 0x44 or 0x9c - feature register */
#define FTSDC010_FEATURE_FIFO_DEPTH(x) (((x) >> 0) & 0xff)
#define FTSDC010_FEATURE_CPRM_FUNCTION (1 << 8)
#define FTSDC010_FIFO_DEPTH_4 0x04
#define FTSDC010_FIFO_DEPTH_8 0x08
#define FTSDC010_FIFO_DEPTH_16 0x10
/* 0x48 or 0xa0 - revision register */
#define FTSDC010_REV_REVISION(x) (((x) & 0xff) >> 0)
#define FTSDC010_REV_MINOR(x) (((x) & 0xff00) >> 8)
#define FTSDC010_REV_MAJOR(x) (((x) & 0xffff0000) >> 16)
#ifdef CONFIG_FTSDC010_SDIO
/* 0x44 - general purpose output */
#define FTSDC010_GPO_PORT(x) (((x) & 0xf) << 0)
/* 0x6c - sdio control register 1 */
#define FTSDC010_SDIO_CTRL1_SDIO_BLK_SIZE(x) (((x) & 0xfff) << 0)
#define FTSDC010_SDIO_CTRL1_SDIO_BLK_MODE (1 << 12)
#define FTSDC010_SDIO_CTRL1_READ_WAIT_EN (1 << 13)
#define FTSDC010_SDIO_CTRL1_SDIO_ENABLE (1 << 14)
#define FTSDC010_SDIO_CTRL1_SDIO_BLK_NO(x) (((x) & 0x1ff) << 15)
/* 0x70 - sdio control register 2 */
#define FTSDC010_SDIO_CTRL2_SUSP_READ_WAIT (1 << 0)
#define FTSDC010_SDIO_CTRL2_SUSP_CMD_ABORT (1 << 1)
/* 0x74 - sdio status register */
#define FTSDC010_SDIO_STATUS_SDIO_BLK_CNT(x) (((x) >> 0) & 0x1ffff)
#define FTSDC010_SDIO_STATUS_FIFO_REMAIN_NO(x) (((x) >> 17) & 0xef)
#endif /* CONFIG_FTSDC010_SDIO */
#endif /* __FTSDC010_H */