upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
87 lines
2.1 KiB
87 lines
2.1 KiB
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2014 Google, Inc
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <pch.h>
|
|
|
|
#define GPIO_BASE 0x44
|
|
#define BIOS_CTRL 0xd8
|
|
|
|
static int pch7_get_spi_base(struct udevice *dev, ulong *sbasep)
|
|
{
|
|
u32 rcba;
|
|
|
|
dm_pci_read_config32(dev, PCH_RCBA, &rcba);
|
|
/* Bits 31-14 are the base address, 13-1 are reserved, 0 is enable */
|
|
rcba = rcba & 0xffffc000;
|
|
*sbasep = rcba + 0x3020;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pch7_set_spi_protect(struct udevice *dev, bool protect)
|
|
{
|
|
uint8_t bios_cntl;
|
|
|
|
/* Adjust the BIOS write protect to dis/allow write commands */
|
|
dm_pci_read_config8(dev, BIOS_CTRL, &bios_cntl);
|
|
if (protect)
|
|
bios_cntl &= ~BIOS_CTRL_BIOSWE;
|
|
else
|
|
bios_cntl |= BIOS_CTRL_BIOSWE;
|
|
dm_pci_write_config8(dev, BIOS_CTRL, bios_cntl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pch7_get_gpio_base(struct udevice *dev, u32 *gbasep)
|
|
{
|
|
u32 base;
|
|
|
|
/*
|
|
* GPIO_BASE moved to its current offset with ICH6, but prior to
|
|
* that it was unused (or undocumented). Check that it looks
|
|
* okay: not all ones or zeros.
|
|
*
|
|
* Note we don't need check bit0 here, because the Tunnel Creek
|
|
* GPIO base address register bit0 is reserved (read returns 0),
|
|
* while on the Ivybridge the bit0 is used to indicate it is an
|
|
* I/O space.
|
|
*/
|
|
dm_pci_read_config32(dev, GPIO_BASE, &base);
|
|
if (base == 0x00000000 || base == 0xffffffff) {
|
|
debug("%s: unexpected BASE value\n", __func__);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/*
|
|
* Okay, I guess we're looking at the right device. The actual
|
|
* GPIO registers are in the PCI device's I/O space, starting
|
|
* at the offset that we just read. Bit 0 indicates that it's
|
|
* an I/O address, not a memory address, so mask that off.
|
|
*/
|
|
*gbasep = base & 1 ? base & ~3 : base & ~15;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pch_ops pch7_ops = {
|
|
.get_spi_base = pch7_get_spi_base,
|
|
.set_spi_protect = pch7_set_spi_protect,
|
|
.get_gpio_base = pch7_get_gpio_base,
|
|
};
|
|
|
|
static const struct udevice_id pch7_ids[] = {
|
|
{ .compatible = "intel,pch7" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(pch7_drv) = {
|
|
.name = "intel-pch7",
|
|
.id = UCLASS_PCH,
|
|
.of_match = pch7_ids,
|
|
.ops = &pch7_ops,
|
|
};
|
|
|