upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
309 lines
8.2 KiB
309 lines
8.2 KiB
/*
|
|
* (C) Copyright 2006 Detlev Zundel, dzu@denx.de
|
|
* (C) Copyright 2001
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <config.h>
|
|
#include <mpc8xx.h>
|
|
|
|
/*
|
|
* Memory Controller Using
|
|
*
|
|
* CS0 - Flash memory (0x40000000)
|
|
* CS3 - SDRAM (0x00000000}
|
|
*/
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
#define _not_used_ 0xffffffff
|
|
|
|
const uint sdram_table[] = {
|
|
/* single read. (offset 0 in upm RAM) */
|
|
0x1f07fc04, 0xeeaefc04, 0x11adfc04, 0xefbbbc00,
|
|
0x1ff77c47,
|
|
|
|
/* MRS initialization (offset 5) */
|
|
|
|
0x1ff77c34, 0xefeabc34, 0x1fb57c35,
|
|
|
|
/* burst read. (offset 8 in upm RAM) */
|
|
0x1f07fc04, 0xeeaefc04, 0x10adfc04, 0xf0affc00,
|
|
0xf0affc00, 0xf1affc00, 0xefbbbc00, 0x1ff77c47,
|
|
_not_used_, _not_used_, _not_used_, _not_used_,
|
|
_not_used_, _not_used_, _not_used_, _not_used_,
|
|
|
|
/* single write. (offset 18 in upm RAM) */
|
|
0x1f27fc04, 0xeeaebc00, 0x01b93c04, 0x1ff77c47,
|
|
_not_used_, _not_used_, _not_used_, _not_used_,
|
|
|
|
/* burst write. (offset 20 in upm RAM) */
|
|
0x1f07fc04, 0xeeaebc00, 0x10ad7c00, 0xf0affc00,
|
|
0xf0affc00, 0xe1bbbc04, 0x1ff77c47, _not_used_,
|
|
_not_used_, _not_used_, _not_used_, _not_used_,
|
|
_not_used_, _not_used_, _not_used_, _not_used_,
|
|
|
|
/* refresh. (offset 30 in upm RAM) */
|
|
0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04,
|
|
0xfffffc84, 0xfffffc07, _not_used_, _not_used_,
|
|
_not_used_, _not_used_, _not_used_, _not_used_,
|
|
|
|
/* exception. (offset 3c in upm RAM) */
|
|
0x7ffffc07, _not_used_, _not_used_, _not_used_
|
|
};
|
|
|
|
const uint nand_flash_table[] = {
|
|
/* single read. (offset 0 in upm RAM) */
|
|
0x0ff3fc04, 0x0ff3fc04, 0x0ff3fc04, 0x0ffffc04,
|
|
0xfffffc00, 0xfffffc05, 0xfffffc05, 0xfffffc05,
|
|
|
|
/* burst read. (offset 8 in upm RAM) */
|
|
0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
|
|
0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
|
|
0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
|
|
0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
|
|
|
|
/* single write. (offset 18 in upm RAM) */
|
|
0x00fffc04, 0x00fffc04, 0x00fffc04, 0x0ffffc04,
|
|
0x0ffffc84, 0x0ffffc84, 0xfffffc00, 0xfffffc05,
|
|
|
|
/* burst write. (offset 20 in upm RAM) */
|
|
0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
|
|
0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
|
|
0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
|
|
0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
|
|
|
|
/* refresh. (offset 30 in upm RAM) */
|
|
0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
|
|
0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
|
|
0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
|
|
|
|
/* exception. (offset 3c in upm RAM) */
|
|
0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05
|
|
};
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/*
|
|
* Check Board Identity:
|
|
*/
|
|
|
|
int checkboard (void)
|
|
{
|
|
#if !defined(CONFIG_CP850)
|
|
puts ("Board: NC650");
|
|
#else
|
|
puts ("Board: CP850");
|
|
#endif
|
|
#if defined(CONFIG_IDS852_REV1)
|
|
puts (" with IDS852 rev 1 module\n");
|
|
#elif defined(CONFIG_IDS852_REV2)
|
|
puts (" with IDS852 rev 2 module\n");
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static long int dram_size (long int, long int *, long int);
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
phys_size_t initdram (int board_type)
|
|
{
|
|
volatile immap_t *immap = (immap_t *) CFG_IMMR;
|
|
volatile memctl8xx_t *memctl = &immap->im_memctl;
|
|
long int size8, size9;
|
|
long int size_b0 = 0;
|
|
unsigned long reg;
|
|
|
|
upmconfig (UPMA, (uint *) sdram_table,
|
|
sizeof (sdram_table) / sizeof (uint));
|
|
|
|
/*
|
|
* Preliminary prescaler for refresh (depends on number of
|
|
* banks): This value is selected for four cycles every 62.4 us
|
|
* with two SDRAM banks or four cycles every 31.2 us with one
|
|
* bank. It will be adjusted after memory sizing.
|
|
*/
|
|
memctl->memc_mptpr = CFG_MPTPR_2BK_8K;
|
|
|
|
memctl->memc_mar = 0x00000088;
|
|
|
|
/*
|
|
* Map controller bank 1 to the SDRAM bank at
|
|
* preliminary address - these have to be modified after the
|
|
* SDRAM size has been determined.
|
|
*/
|
|
memctl->memc_or3 = CFG_OR3_PRELIM;
|
|
memctl->memc_br3 = CFG_BR3_PRELIM;
|
|
|
|
memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
|
|
|
|
udelay (200);
|
|
|
|
/* perform SDRAM initializsation sequence */
|
|
|
|
memctl->memc_mcr = 0x80006105; /* SDRAM bank 0 */
|
|
udelay (200);
|
|
memctl->memc_mcr = 0x80006230; /* SDRAM bank 0 - execute twice */
|
|
udelay (200);
|
|
|
|
memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
|
|
|
|
udelay (1000);
|
|
|
|
/*
|
|
* Check Bank 0 Memory Size for re-configuration
|
|
*
|
|
* try 8 column mode
|
|
*/
|
|
size8 = dram_size (CFG_MAMR_8COL, SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
|
|
|
|
udelay (1000);
|
|
|
|
/*
|
|
* try 9 column mode
|
|
*/
|
|
size9 = dram_size (CFG_MAMR_9COL, SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
|
|
|
|
udelay (1000);
|
|
|
|
if (size8 < size9) {
|
|
size_b0 = size9;
|
|
} else {
|
|
size_b0 = size8;
|
|
memctl->memc_mamr = CFG_MAMR_8COL;
|
|
udelay (500);
|
|
}
|
|
|
|
/*
|
|
* Adjust refresh rate depending on SDRAM type, both banks.
|
|
* For types > 128 MBit leave it at the current (fast) rate
|
|
*/
|
|
if ((size_b0 < 0x02000000)) {
|
|
/* reduce to 15.6 us (62.4 us / quad) */
|
|
memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
|
|
udelay (1000);
|
|
}
|
|
|
|
/*
|
|
* Final mapping
|
|
*/
|
|
|
|
memctl->memc_or3 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
|
|
memctl->memc_br3 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
|
|
|
|
/* adjust refresh rate depending on SDRAM type, one bank */
|
|
reg = memctl->memc_mptpr;
|
|
reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */
|
|
memctl->memc_mptpr = reg;
|
|
|
|
udelay (10000);
|
|
|
|
/* Configure UPMB for NAND flash access */
|
|
upmconfig (UPMB, (uint *) nand_flash_table,
|
|
sizeof (nand_flash_table) / sizeof (uint));
|
|
|
|
memctl->memc_mbmr = CFG_MBMR_NAND;
|
|
|
|
return (size_b0);
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/*
|
|
* Check memory range for valid RAM. A simple memory test determines
|
|
* the actually available RAM size between addresses `base' and
|
|
* `base + maxsize'. Some (not all) hardware errors are detected:
|
|
* - short between address lines
|
|
* - short between data lines
|
|
*/
|
|
|
|
static long int dram_size (long int mamr_value, long int *base, long int maxsize)
|
|
{
|
|
volatile immap_t *immap = (immap_t *) CFG_IMMR;
|
|
volatile memctl8xx_t *memctl = &immap->im_memctl;
|
|
|
|
memctl->memc_mamr = mamr_value;
|
|
|
|
return (get_ram_size(base, maxsize));
|
|
}
|
|
|
|
|
|
#if defined(CONFIG_CP850)
|
|
|
|
#define DPRAM_VARNAME "KP850DIP"
|
|
#define PARAM_ADDR 0x7C0
|
|
#define NAME_ADDR 0x7F8
|
|
#define BOARD_NAME "KP01"
|
|
#define DEFAULT_LB "241111"
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
int iCompatMode = 0;
|
|
char *pParam = NULL;
|
|
char *envlb;
|
|
|
|
/*
|
|
First byte in CPLD read address space signals compatibility mode
|
|
0 - cp850
|
|
1 - kp852
|
|
*/
|
|
pParam = (char*)(CFG_CPLD_BASE);
|
|
if( *pParam != 0)
|
|
iCompatMode = 1;
|
|
|
|
if ( iCompatMode != 0) {
|
|
/*
|
|
In KP852 compatibility mode we have to write to
|
|
DPRAM as early as possible the binary coded
|
|
line config and board name.
|
|
The line config is derived from the environment
|
|
variable DPRAM_VARNAME by converting from ASCII
|
|
to binary per character.
|
|
*/
|
|
if ( (envlb = getenv ( DPRAM_VARNAME )) == 0) {
|
|
setenv( DPRAM_VARNAME, DEFAULT_LB);
|
|
envlb = DEFAULT_LB;
|
|
}
|
|
|
|
/* Status string */
|
|
printf("Mode: KP852(LB=%s)\n", envlb);
|
|
|
|
/* copy appl init */
|
|
pParam = (char*)(DPRAM_BASE_ADDR + PARAM_ADDR);
|
|
while (*envlb) {
|
|
*(pParam++) = *(envlb++) - '0';
|
|
}
|
|
*pParam = '\0';
|
|
|
|
/* copy board id */
|
|
pParam = (char*)(DPRAM_BASE_ADDR + NAME_ADDR);
|
|
strcpy( pParam, BOARD_NAME);
|
|
} else {
|
|
puts("Mode: CP850\n");
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|