upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
416 lines
9.6 KiB
416 lines
9.6 KiB
/*
|
|
* Copyright 2007 Wind River Systemes, Inc. <www.windriver.com>
|
|
* Copyright 2007 Embedded Specialties, Inc.
|
|
* Joe Hamman joe.hamman@embeddedspecialties.com
|
|
*
|
|
* Copyright 2004 Freescale Semiconductor.
|
|
* Jeff Brown
|
|
* Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
|
|
*
|
|
* (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <pci.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/immap_86xx.h>
|
|
#include <asm/immap_fsl_pci.h>
|
|
#include <asm/fsl_ddr_sdram.h>
|
|
#include <libfdt.h>
|
|
#include <fdt_support.h>
|
|
|
|
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
|
|
extern void ddr_enable_ecc (unsigned int dram_size);
|
|
#endif
|
|
|
|
long int fixed_sdram (void);
|
|
|
|
int board_early_init_f (void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
int checkboard (void)
|
|
{
|
|
puts ("Board: Wind River SBC8641D\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
phys_size_t initdram (int board_type)
|
|
{
|
|
long dram_size = 0;
|
|
|
|
#if defined(CONFIG_SPD_EEPROM)
|
|
dram_size = fsl_ddr_sdram();
|
|
#else
|
|
dram_size = fixed_sdram ();
|
|
#endif
|
|
|
|
#if defined(CFG_RAMBOOT)
|
|
puts (" DDR: ");
|
|
return dram_size;
|
|
#endif
|
|
|
|
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
|
|
/*
|
|
* Initialize and enable DDR ECC.
|
|
*/
|
|
ddr_enable_ecc (dram_size);
|
|
#endif
|
|
|
|
puts (" DDR: ");
|
|
return dram_size;
|
|
}
|
|
|
|
#if defined(CFG_DRAM_TEST)
|
|
int testdram (void)
|
|
{
|
|
uint *pstart = (uint *) CFG_MEMTEST_START;
|
|
uint *pend = (uint *) CFG_MEMTEST_END;
|
|
uint *p;
|
|
|
|
puts ("SDRAM test phase 1:\n");
|
|
for (p = pstart; p < pend; p++)
|
|
*p = 0xaaaaaaaa;
|
|
|
|
for (p = pstart; p < pend; p++) {
|
|
if (*p != 0xaaaaaaaa) {
|
|
printf ("SDRAM test fails at: %08x\n", (uint) p);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
puts ("SDRAM test phase 2:\n");
|
|
for (p = pstart; p < pend; p++)
|
|
*p = 0x55555555;
|
|
|
|
for (p = pstart; p < pend; p++) {
|
|
if (*p != 0x55555555) {
|
|
printf ("SDRAM test fails at: %08x\n", (uint) p);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
puts ("SDRAM test passed.\n");
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#if !defined(CONFIG_SPD_EEPROM)
|
|
/*
|
|
* Fixed sdram init -- doesn't use serial presence detect.
|
|
*/
|
|
long int fixed_sdram (void)
|
|
{
|
|
#if !defined(CFG_RAMBOOT)
|
|
volatile immap_t *immap = (immap_t *) CFG_IMMR;
|
|
volatile ccsr_ddr_t *ddr = &immap->im_ddr1;
|
|
|
|
ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
|
|
ddr->cs1_bnds = CFG_DDR_CS1_BNDS;
|
|
ddr->cs2_bnds = CFG_DDR_CS2_BNDS;
|
|
ddr->cs3_bnds = CFG_DDR_CS3_BNDS;
|
|
ddr->cs0_config = CFG_DDR_CS0_CONFIG;
|
|
ddr->cs1_config = CFG_DDR_CS1_CONFIG;
|
|
ddr->cs2_config = CFG_DDR_CS2_CONFIG;
|
|
ddr->cs3_config = CFG_DDR_CS3_CONFIG;
|
|
ddr->timing_cfg_3 = CFG_DDR_TIMING_3;
|
|
ddr->timing_cfg_0 = CFG_DDR_TIMING_0;
|
|
ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
|
|
ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
|
|
ddr->sdram_cfg_1 = CFG_DDR_CFG_1A;
|
|
ddr->sdram_cfg_2 = CFG_DDR_CFG_2;
|
|
ddr->sdram_mode_1 = CFG_DDR_MODE_1;
|
|
ddr->sdram_mode_2 = CFG_DDR_MODE_2;
|
|
ddr->sdram_mode_cntl = CFG_DDR_MODE_CTL;
|
|
ddr->sdram_interval = CFG_DDR_INTERVAL;
|
|
ddr->sdram_data_init = CFG_DDR_DATA_INIT;
|
|
ddr->sdram_clk_cntl = CFG_DDR_CLK_CTRL;
|
|
|
|
asm ("sync;isync");
|
|
|
|
udelay (500);
|
|
|
|
ddr->sdram_cfg_1 = CFG_DDR_CFG_1B;
|
|
asm ("sync; isync");
|
|
|
|
udelay (500);
|
|
ddr = &immap->im_ddr2;
|
|
|
|
ddr->cs0_bnds = CFG_DDR2_CS0_BNDS;
|
|
ddr->cs1_bnds = CFG_DDR2_CS1_BNDS;
|
|
ddr->cs2_bnds = CFG_DDR2_CS2_BNDS;
|
|
ddr->cs3_bnds = CFG_DDR2_CS3_BNDS;
|
|
ddr->cs0_config = CFG_DDR2_CS0_CONFIG;
|
|
ddr->cs1_config = CFG_DDR2_CS1_CONFIG;
|
|
ddr->cs2_config = CFG_DDR2_CS2_CONFIG;
|
|
ddr->cs3_config = CFG_DDR2_CS3_CONFIG;
|
|
ddr->timing_cfg_3 = CFG_DDR2_EXT_REFRESH;
|
|
ddr->timing_cfg_0 = CFG_DDR2_TIMING_0;
|
|
ddr->timing_cfg_1 = CFG_DDR2_TIMING_1;
|
|
ddr->timing_cfg_2 = CFG_DDR2_TIMING_2;
|
|
ddr->sdram_cfg_1 = CFG_DDR2_CFG_1A;
|
|
ddr->sdram_cfg_2 = CFG_DDR2_CFG_2;
|
|
ddr->sdram_mode_1 = CFG_DDR2_MODE_1;
|
|
ddr->sdram_mode_2 = CFG_DDR2_MODE_2;
|
|
ddr->sdram_mode_cntl = CFG_DDR2_MODE_CTL;
|
|
ddr->sdram_interval = CFG_DDR2_INTERVAL;
|
|
ddr->sdram_data_init = CFG_DDR2_DATA_INIT;
|
|
ddr->sdram_clk_cntl = CFG_DDR2_CLK_CTRL;
|
|
|
|
asm ("sync;isync");
|
|
|
|
udelay (500);
|
|
|
|
ddr->sdram_cfg_1 = CFG_DDR2_CFG_1B;
|
|
asm ("sync; isync");
|
|
|
|
udelay (500);
|
|
#endif
|
|
return CFG_SDRAM_SIZE * 1024 * 1024;
|
|
}
|
|
#endif /* !defined(CONFIG_SPD_EEPROM) */
|
|
|
|
#if defined(CONFIG_PCI)
|
|
/*
|
|
* Initialize PCI Devices, report devices found.
|
|
*/
|
|
|
|
#ifndef CONFIG_PCI_PNP
|
|
static struct pci_config_table pci_fsl86xxads_config_table[] = {
|
|
{PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
|
|
PCI_IDSEL_NUMBER, PCI_ANY_ID,
|
|
pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
|
|
PCI_ENET0_MEMADDR,
|
|
PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER}},
|
|
{}
|
|
};
|
|
#endif
|
|
|
|
static struct pci_controller pci1_hose = {
|
|
#ifndef CONFIG_PCI_PNP
|
|
config_table:pci_mpc86xxcts_config_table
|
|
#endif
|
|
};
|
|
#endif /* CONFIG_PCI */
|
|
|
|
#ifdef CONFIG_PCI2
|
|
static struct pci_controller pci2_hose;
|
|
#endif /* CONFIG_PCI2 */
|
|
|
|
int first_free_busno = 0;
|
|
|
|
void pci_init_board(void)
|
|
{
|
|
volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
|
|
volatile ccsr_gur_t *gur = &immap->im_gur;
|
|
uint devdisr = gur->devdisr;
|
|
uint io_sel = (gur->pordevsr & MPC8641_PORDEVSR_IO_SEL)
|
|
>> MPC8641_PORDEVSR_IO_SEL_SHIFT;
|
|
|
|
#ifdef CONFIG_PCI1
|
|
{
|
|
volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR;
|
|
extern void fsl_pci_init(struct pci_controller *hose);
|
|
struct pci_controller *hose = &pci1_hose;
|
|
#ifdef DEBUG
|
|
uint host1_agent = (gur->porbmsr & MPC8641_PORBMSR_HA)
|
|
>> MPC8641_PORBMSR_HA_SHIFT;
|
|
uint pex1_agent = (host1_agent == 0) || (host1_agent == 1);
|
|
#endif
|
|
if ((io_sel == 2 || io_sel == 3 || io_sel == 5
|
|
|| io_sel == 6 || io_sel == 7 || io_sel == 0xF)
|
|
&& !(devdisr & MPC86xx_DEVDISR_PCIEX1)) {
|
|
debug("PCI-EXPRESS 1: %s \n", pex1_agent ? "Agent" : "Host");
|
|
debug("0x%08x=0x%08x ", &pci->pme_msg_det, pci->pme_msg_det);
|
|
if (pci->pme_msg_det) {
|
|
pci->pme_msg_det = 0xffffffff;
|
|
debug(" with errors. Clearing. Now 0x%08x",
|
|
pci->pme_msg_det);
|
|
}
|
|
debug("\n");
|
|
|
|
/* inbound */
|
|
pci_set_region(hose->regions + 0,
|
|
CFG_PCI_MEMORY_BUS,
|
|
CFG_PCI_MEMORY_PHYS,
|
|
CFG_PCI_MEMORY_SIZE,
|
|
PCI_REGION_MEM | PCI_REGION_MEMORY);
|
|
|
|
/* outbound memory */
|
|
pci_set_region(hose->regions + 1,
|
|
CFG_PCI1_MEM_BASE,
|
|
CFG_PCI1_MEM_PHYS,
|
|
CFG_PCI1_MEM_SIZE,
|
|
PCI_REGION_MEM);
|
|
|
|
/* outbound io */
|
|
pci_set_region(hose->regions + 2,
|
|
CFG_PCI1_IO_BASE,
|
|
CFG_PCI1_IO_PHYS,
|
|
CFG_PCI1_IO_SIZE,
|
|
PCI_REGION_IO);
|
|
|
|
hose->region_count = 3;
|
|
|
|
hose->first_busno=first_free_busno;
|
|
pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
|
|
|
|
fsl_pci_init(hose);
|
|
|
|
first_free_busno=hose->last_busno+1;
|
|
printf (" PCI-EXPRESS 1 on bus %02x - %02x\n",
|
|
hose->first_busno,hose->last_busno);
|
|
|
|
} else {
|
|
puts("PCI-EXPRESS 1: Disabled\n");
|
|
}
|
|
}
|
|
#else
|
|
puts("PCI-EXPRESS1: Disabled\n");
|
|
#endif /* CONFIG_PCI1 */
|
|
|
|
#ifdef CONFIG_PCI2
|
|
{
|
|
volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI2_ADDR;
|
|
extern void fsl_pci_init(struct pci_controller *hose);
|
|
struct pci_controller *hose = &pci2_hose;
|
|
|
|
|
|
/* inbound */
|
|
pci_set_region(hose->regions + 0,
|
|
CFG_PCI_MEMORY_BUS,
|
|
CFG_PCI_MEMORY_PHYS,
|
|
CFG_PCI_MEMORY_SIZE,
|
|
PCI_REGION_MEM | PCI_REGION_MEMORY);
|
|
|
|
/* outbound memory */
|
|
pci_set_region(hose->regions + 1,
|
|
CFG_PCI2_MEM_BASE,
|
|
CFG_PCI2_MEM_PHYS,
|
|
CFG_PCI2_MEM_SIZE,
|
|
PCI_REGION_MEM);
|
|
|
|
/* outbound io */
|
|
pci_set_region(hose->regions + 2,
|
|
CFG_PCI2_IO_BASE,
|
|
CFG_PCI2_IO_PHYS,
|
|
CFG_PCI2_IO_SIZE,
|
|
PCI_REGION_IO);
|
|
|
|
hose->region_count = 3;
|
|
|
|
hose->first_busno=first_free_busno;
|
|
pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
|
|
|
|
fsl_pci_init(hose);
|
|
|
|
first_free_busno=hose->last_busno+1;
|
|
printf (" PCI-EXPRESS 2 on bus %02x - %02x\n",
|
|
hose->first_busno,hose->last_busno);
|
|
}
|
|
#else
|
|
puts("PCI-EXPRESS 2: Disabled\n");
|
|
#endif /* CONFIG_PCI2 */
|
|
|
|
}
|
|
|
|
|
|
#if defined(CONFIG_OF_BOARD_SETUP)
|
|
|
|
void
|
|
ft_board_setup (void *blob, bd_t *bd)
|
|
{
|
|
int node, tmp[2];
|
|
const char *path;
|
|
|
|
ft_cpu_setup(blob, bd);
|
|
|
|
node = fdt_path_offset(blob, "/aliases");
|
|
tmp[0] = 0;
|
|
if (node >= 0) {
|
|
#ifdef CONFIG_PCI1
|
|
path = fdt_getprop(blob, node, "pci0", NULL);
|
|
if (path) {
|
|
tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
|
|
do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
|
|
}
|
|
#endif
|
|
#ifdef CONFIG_PCI2
|
|
path = fdt_getprop(blob, node, "pci1", NULL);
|
|
if (path) {
|
|
tmp[1] = pci2_hose.last_busno - pci2_hose.first_busno;
|
|
do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
|
|
}
|
|
#endif
|
|
}
|
|
}
|
|
#endif
|
|
|
|
void sbc8641d_reset_board (void)
|
|
{
|
|
puts ("Resetting board....\n");
|
|
}
|
|
|
|
/*
|
|
* get_board_sys_clk
|
|
* Clock is fixed at 1GHz on this board. Used for CONFIG_SYS_CLK_FREQ
|
|
*/
|
|
|
|
unsigned long get_board_sys_clk (ulong dummy)
|
|
{
|
|
int i;
|
|
ulong val = 0;
|
|
|
|
i = 5;
|
|
i &= 0x07;
|
|
|
|
switch (i) {
|
|
case 0:
|
|
val = 33000000;
|
|
break;
|
|
case 1:
|
|
val = 40000000;
|
|
break;
|
|
case 2:
|
|
val = 50000000;
|
|
break;
|
|
case 3:
|
|
val = 66000000;
|
|
break;
|
|
case 4:
|
|
val = 83000000;
|
|
break;
|
|
case 5:
|
|
val = 100000000;
|
|
break;
|
|
case 6:
|
|
val = 134000000;
|
|
break;
|
|
case 7:
|
|
val = 166000000;
|
|
break;
|
|
}
|
|
|
|
return val;
|
|
}
|
|
|