upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/doc/README.mvsmr

1.5 KiB

Matrix Vision mvSMR
-------------------

1. Board Description

The mvSMR is a 75x130mm single image processing board used
in automation. Power Supply is 24VDC.

2 System Components

2.1 CPU
Freescale MPC5200B CPU running at 400MHz core and 133MHz XLB/IPB.
64MB DDR-I @ 133MHz.
8 MByte Nor Flash on local bus.
2 serial ports. Console running on ttyS0 @ 115200 8N1.

2.2 PCI
PCI clock fixed at 33MHz due to old'n'slow Xilinx PCI core.

2.3 FPGA
Xilinx Spartan-3 XC3S200 with PCI DMA engine.
Connects to Matrix Vision specific CCD/CMOS sensor interface.

2.4 I2C
EEPROM @ 0xA0 for vendor specifics.
image sensor interface (slave addresses depend on sensor)

3 Flash layout.

reset vector is 0x00000100, i.e. "LOWBOOT".

FF800000 u-boot
FF806000 u-boot script image
FF808000 u-boot environment
FF840000 FPGA raw bit file
FF880000 root FS
FFF00000 kernel

4 Booting

On startup the bootscript @ FF806000 is executed. This script can be
exchanged easily. Default boot mode is "boot from flash", i.e. system
works stand-alone.

This behaviour depends on some environment variables :

"netboot" : yes ->try dhcp/bootp and boot from network.
A "dhcp_client_id" and "dhcp_vendor-class-identifier" can be used for
DHCP server configuration, e.g. to provide different images to
different devices.

During netboot the system tries to get 3 image files:
1. Kernel - name + data is given during BOOTP.
2. Initrd - name is stored in "initrd_name"
Fallback files are the flash versions.