upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/imx31_phycore/imx31_phycore.c

153 lines
4.0 KiB

/*
*
* (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <s6e63d6.h>
#include <netdev.h>
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/sys_proto.h>
DECLARE_GLOBAL_DATA_PTR;
int dram_init(void)
{
/* dram_init must store complete ramsize in gd->ram_size */
gd->ram_size = get_ram_size((void *)PHYS_SDRAM_1,
PHYS_SDRAM_1_SIZE);
return 0;
}
int board_init(void)
{
gd->bd->bi_arch_number = MACH_TYPE_PCM037; /* board id for linux */
gd->bd->bi_boot_params = (0x80000100); /* adress of boot parameters */
return 0;
}
int board_early_init_f(void)
{
/* CS0: Nor Flash */
static const struct mxc_weimcs cs0 = {
/* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 15, 0, 0, 3),
/* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
CSCR_L(1, 0, 0, 0, 0, 1, 5, 0, 0, 0, 1, 1),
/* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
CSCR_A(0, 0, 7, 2, 0, 0, 2, 1, 0, 0, 0, 0, 0, 0)
};
/* CS1: Network Controller */
static const struct mxc_weimcs cs1 = {
/* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 31, 0, 0, 6),
/* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
CSCR_L(4, 4, 4, 10, 4, 0, 5, 4, 0, 0, 0, 1),
/* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
CSCR_A(4, 4, 4, 4, 0, 1, 4, 3, 0, 0, 0, 0, 1, 0)
};
/* CS4: SRAM */
static const struct mxc_weimcs cs4 = {
/* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 24, 0, 4, 3),
/* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
CSCR_L(2, 2, 2, 5, 2, 0, 5, 2, 0, 0, 0, 1),
/* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
CSCR_A(2, 2, 2, 2, 0, 0, 2, 2, 0, 0, 0, 0, 0, 0)
};
mxc_setup_weimcs(0, &cs0);
mxc_setup_weimcs(1, &cs1);
mxc_setup_weimcs(4, &cs4);
/* setup pins for UART1 */
mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);
mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX);
mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
mx31_gpio_mux(MUX_CTS1__UART1_CTS_B);
/* setup pins for I2C2 (for EEPROM, RTC) */
mx31_gpio_mux(MUX_CSPI2_MOSI__I2C2_SCL);
mx31_gpio_mux(MUX_CSPI2_MISO__I2C2_SDA);
return 0;
}
#ifdef CONFIG_BOARD_LATE_INIT
int board_late_init(void)
{
#ifdef CONFIG_S6E63D6
struct s6e63d6 data = {
/*
* See comment in mxc_spi.c::decode_cs() for .cs field format.
* We use GPIO 57 as a chipselect for the S6E63D6 and chipselect
* 2 of the SPI controller #1, since it is unused.
*/
.cs = 2 | (57 << 8),
.bus = 0,
.id = 0,
};
int ret;
/* SPI1 */
mx31_gpio_mux(MUX_CSPI1_SCLK__CSPI1_CLK);
mx31_gpio_mux(MUX_CSPI1_SPI_RDY__CSPI1_DATAREADY_B);
mx31_gpio_mux(MUX_CSPI1_MOSI__CSPI1_MOSI);
mx31_gpio_mux(MUX_CSPI1_MISO__CSPI1_MISO);
mx31_gpio_mux(MUX_CSPI1_SS0__CSPI1_SS0_B);
mx31_gpio_mux(MUX_CSPI1_SS1__CSPI1_SS1_B);
mx31_gpio_mux(MUX_CSPI1_SS2__CSPI1_SS2_B);
/* start SPI1 clock */
__REG(CCM_CGR2) = __REG(CCM_CGR2) | (3 << 2);
/* GPIO 57 */
/* sw_mux_ctl_key_col4_key_col5_key_col6_key_col7 */
mx31_gpio_mux(IOMUX_MODE(0x63, MUX_CTL_GPIO));
/* SPI1 CS2 is free */
ret = s6e63d6_init(&data);
if (ret)
return ret;
/*
* This is a "magic" sequence to initialise a C0240QGLA / C0283QGLC
* OLED display connected to a S6E63D6 SPI display controller in the
* 18 bit RGB mode
*/
s6e63d6_index(&data, 2);
s6e63d6_param(&data, 0x0182);
s6e63d6_index(&data, 3);
s6e63d6_param(&data, 0x8130);
s6e63d6_index(&data, 0x10);
s6e63d6_param(&data, 0x0000);
s6e63d6_index(&data, 5);
s6e63d6_param(&data, 0x0001);
s6e63d6_index(&data, 0x22);
#endif
return 0;
}
#endif
int checkboard (void)
{
printf("Board: Phytec phyCore i.MX31\n");
return 0;
}
int board_eth_init(bd_t *bis)
{
int rc = 0;
#ifdef CONFIG_SMC911X
rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
#endif
return rc;
}