upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/drivers/serial/serial_pl01x_internal.h

128 lines
4.6 KiB

/*
* (C) Copyright 2003, 2004
* ARM Ltd.
* Philippe Robin, <philippe.robin@arm.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
/*
* ARM PrimeCell UART's (PL010 & PL011)
* ------------------------------------
*
* Definitions common to both PL010 & PL011
*
*/
#ifndef __ASSEMBLY__
/*
* We can use a combined structure for PL010 and PL011, because they overlap
* only in common registers.
*/
struct pl01x_regs {
u32 dr; /* 0x00 Data register */
u32 ecr; /* 0x04 Error clear register (Write) */
u32 pl010_lcrh; /* 0x08 Line control register, high byte */
u32 pl010_lcrm; /* 0x0C Line control register, middle byte */
u32 pl010_lcrl; /* 0x10 Line control register, low byte */
u32 pl010_cr; /* 0x14 Control register */
u32 fr; /* 0x18 Flag register (Read only) */
#ifdef CONFIG_PL011_SERIAL_RLCR
u32 pl011_rlcr; /* 0x1c Receive line control register */
#else
u32 reserved;
#endif
u32 ilpr; /* 0x20 IrDA low-power counter register */
u32 pl011_ibrd; /* 0x24 Integer baud rate register */
u32 pl011_fbrd; /* 0x28 Fractional baud rate register */
u32 pl011_lcrh; /* 0x2C Line control register */
u32 pl011_cr; /* 0x30 Control register */
};
#endif
#define UART_PL01x_RSR_OE 0x08
#define UART_PL01x_RSR_BE 0x04
#define UART_PL01x_RSR_PE 0x02
#define UART_PL01x_RSR_FE 0x01
#define UART_PL01x_FR_TXFE 0x80
#define UART_PL01x_FR_RXFF 0x40
#define UART_PL01x_FR_TXFF 0x20
#define UART_PL01x_FR_RXFE 0x10
#define UART_PL01x_FR_BUSY 0x08
#define UART_PL01x_FR_TMSK (UART_PL01x_FR_TXFF + UART_PL01x_FR_BUSY)
/*
* PL010 definitions
*
*/
#define UART_PL010_CR_LPE (1 << 7)
#define UART_PL010_CR_RTIE (1 << 6)
#define UART_PL010_CR_TIE (1 << 5)
#define UART_PL010_CR_RIE (1 << 4)
#define UART_PL010_CR_MSIE (1 << 3)
#define UART_PL010_CR_IIRLP (1 << 2)
#define UART_PL010_CR_SIREN (1 << 1)
#define UART_PL010_CR_UARTEN (1 << 0)
#define UART_PL010_LCRH_WLEN_8 (3 << 5)
#define UART_PL010_LCRH_WLEN_7 (2 << 5)
#define UART_PL010_LCRH_WLEN_6 (1 << 5)
#define UART_PL010_LCRH_WLEN_5 (0 << 5)
#define UART_PL010_LCRH_FEN (1 << 4)
#define UART_PL010_LCRH_STP2 (1 << 3)
#define UART_PL010_LCRH_EPS (1 << 2)
#define UART_PL010_LCRH_PEN (1 << 1)
#define UART_PL010_LCRH_BRK (1 << 0)
#define UART_PL010_BAUD_460800 1
#define UART_PL010_BAUD_230400 3
#define UART_PL010_BAUD_115200 7
#define UART_PL010_BAUD_57600 15
#define UART_PL010_BAUD_38400 23
#define UART_PL010_BAUD_19200 47
#define UART_PL010_BAUD_14400 63
#define UART_PL010_BAUD_9600 95
#define UART_PL010_BAUD_4800 191
#define UART_PL010_BAUD_2400 383
#define UART_PL010_BAUD_1200 767
/*
* PL011 definitions
*
*/
#define UART_PL011_LCRH_SPS (1 << 7)
#define UART_PL011_LCRH_WLEN_8 (3 << 5)
#define UART_PL011_LCRH_WLEN_7 (2 << 5)
#define UART_PL011_LCRH_WLEN_6 (1 << 5)
#define UART_PL011_LCRH_WLEN_5 (0 << 5)
#define UART_PL011_LCRH_FEN (1 << 4)
#define UART_PL011_LCRH_STP2 (1 << 3)
#define UART_PL011_LCRH_EPS (1 << 2)
#define UART_PL011_LCRH_PEN (1 << 1)
#define UART_PL011_LCRH_BRK (1 << 0)
#define UART_PL011_CR_CTSEN (1 << 15)
#define UART_PL011_CR_RTSEN (1 << 14)
#define UART_PL011_CR_OUT2 (1 << 13)
#define UART_PL011_CR_OUT1 (1 << 12)
#define UART_PL011_CR_RTS (1 << 11)
#define UART_PL011_CR_DTR (1 << 10)
#define UART_PL011_CR_RXE (1 << 9)
#define UART_PL011_CR_TXE (1 << 8)
#define UART_PL011_CR_LPE (1 << 7)
#define UART_PL011_CR_IIRLP (1 << 2)
#define UART_PL011_CR_SIREN (1 << 1)
#define UART_PL011_CR_UARTEN (1 << 0)
#define UART_PL011_IMSC_OEIM (1 << 10)
#define UART_PL011_IMSC_BEIM (1 << 9)
#define UART_PL011_IMSC_PEIM (1 << 8)
#define UART_PL011_IMSC_FEIM (1 << 7)
#define UART_PL011_IMSC_RTIM (1 << 6)
#define UART_PL011_IMSC_TXIM (1 << 5)
#define UART_PL011_IMSC_RXIM (1 << 4)
#define UART_PL011_IMSC_DSRMIM (1 << 3)
#define UART_PL011_IMSC_DCDMIM (1 << 2)
#define UART_PL011_IMSC_CTSMIM (1 << 1)
#define UART_PL011_IMSC_RIMIM (1 << 0)