upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/include/tpm.h

597 lines
17 KiB

/*
* Copyright (c) 2013 The Chromium OS Authors.
* Coypright (c) 2013 Guntermann & Drunck GmbH
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __TPM_H
#define __TPM_H
/*
* Here is a partial implementation of TPM commands. Please consult TCG Main
* Specification for definitions of TPM commands.
*/
#define TPM_HEADER_SIZE 10
enum tpm_duration {
TPM_SHORT = 0,
TPM_MEDIUM = 1,
TPM_LONG = 2,
TPM_UNDEFINED,
TPM_DURATION_COUNT,
};
enum tpm_startup_type {
TPM_ST_CLEAR = 0x0001,
TPM_ST_STATE = 0x0002,
TPM_ST_DEACTIVATED = 0x0003,
};
enum tpm_physical_presence {
TPM_PHYSICAL_PRESENCE_HW_DISABLE = 0x0200,
TPM_PHYSICAL_PRESENCE_CMD_DISABLE = 0x0100,
TPM_PHYSICAL_PRESENCE_LIFETIME_LOCK = 0x0080,
TPM_PHYSICAL_PRESENCE_HW_ENABLE = 0x0040,
TPM_PHYSICAL_PRESENCE_CMD_ENABLE = 0x0020,
TPM_PHYSICAL_PRESENCE_NOTPRESENT = 0x0010,
TPM_PHYSICAL_PRESENCE_PRESENT = 0x0008,
TPM_PHYSICAL_PRESENCE_LOCK = 0x0004,
};
enum tpm_nv_index {
TPM_NV_INDEX_LOCK = 0xffffffff,
TPM_NV_INDEX_0 = 0x00000000,
TPM_NV_INDEX_DIR = 0x10000001,
};
#define TPM_NV_PER_GLOBALLOCK (1U << 15)
#define TPM_NV_PER_PPWRITE (1U << 0)
#define TPM_NV_PER_READ_STCLEAR (1U << 31)
#define TPM_NV_PER_WRITE_STCLEAR (1U << 14)
enum {
TPM_PUBEK_SIZE = 256,
};
/**
* TPM return codes as defined in the TCG Main specification
* (TPM Main Part 2 Structures; Specification version 1.2)
*/
enum tpm_return_code {
TPM_BASE = 0x00000000,
TPM_NON_FATAL = 0x00000800,
TPM_SUCCESS = TPM_BASE,
/* TPM-defined fatal error codes */
TPM_AUTHFAIL = TPM_BASE + 1,
TPM_BADINDEX = TPM_BASE + 2,
TPM_BAD_PARAMETER = TPM_BASE + 3,
TPM_AUDITFAILURE = TPM_BASE + 4,
TPM_CLEAR_DISABLED = TPM_BASE + 5,
TPM_DEACTIVATED = TPM_BASE + 6,
TPM_DISABLED = TPM_BASE + 7,
TPM_DISABLED_CMD = TPM_BASE + 8,
TPM_FAIL = TPM_BASE + 9,
TPM_BAD_ORDINAL = TPM_BASE + 10,
TPM_INSTALL_DISABLED = TPM_BASE + 11,
TPM_INVALID_KEYHANDLE = TPM_BASE + 12,
TPM_KEYNOTFOUND = TPM_BASE + 13,
TPM_INAPPROPRIATE_ENC = TPM_BASE + 14,
TPM_MIGRATE_FAIL = TPM_BASE + 15,
TPM_INVALID_PCR_INFO = TPM_BASE + 16,
TPM_NOSPACE = TPM_BASE + 17,
TPM_NOSRK = TPM_BASE + 18,
TPM_NOTSEALED_BLOB = TPM_BASE + 19,
TPM_OWNER_SET = TPM_BASE + 20,
TPM_RESOURCES = TPM_BASE + 21,
TPM_SHORTRANDOM = TPM_BASE + 22,
TPM_SIZE = TPM_BASE + 23,
TPM_WRONGPCRVAL = TPM_BASE + 24,
TPM_BAD_PARAM_SIZE = TPM_BASE + 25,
TPM_SHA_THREAD = TPM_BASE + 26,
TPM_SHA_ERROR = TPM_BASE + 27,
TPM_FAILEDSELFTEST = TPM_BASE + 28,
TPM_AUTH2FAIL = TPM_BASE + 29,
TPM_BADTAG = TPM_BASE + 30,
TPM_IOERROR = TPM_BASE + 31,
TPM_ENCRYPT_ERROR = TPM_BASE + 32,
TPM_DECRYPT_ERROR = TPM_BASE + 33,
TPM_INVALID_AUTHHANDLE = TPM_BASE + 34,
TPM_NO_ENDORSEMENT = TPM_BASE + 35,
TPM_INVALID_KEYUSAGE = TPM_BASE + 36,
TPM_WRONG_ENTITYTYPE = TPM_BASE + 37,
TPM_INVALID_POSTINIT = TPM_BASE + 38,
TPM_INAPPROPRIATE_SIG = TPM_BASE + 39,
TPM_BAD_KEY_PROPERTY = TPM_BASE + 40,
TPM_BAD_MIGRATION = TPM_BASE + 41,
TPM_BAD_SCHEME = TPM_BASE + 42,
TPM_BAD_DATASIZE = TPM_BASE + 43,
TPM_BAD_MODE = TPM_BASE + 44,
TPM_BAD_PRESENCE = TPM_BASE + 45,
TPM_BAD_VERSION = TPM_BASE + 46,
TPM_NO_WRAP_TRANSPORT = TPM_BASE + 47,
TPM_AUDITFAIL_UNSUCCESSFUL = TPM_BASE + 48,
TPM_AUDITFAIL_SUCCESSFUL = TPM_BASE + 49,
TPM_NOTRESETABLE = TPM_BASE + 50,
TPM_NOTLOCAL = TPM_BASE + 51,
TPM_BAD_TYPE = TPM_BASE + 52,
TPM_INVALID_RESOURCE = TPM_BASE + 53,
TPM_NOTFIPS = TPM_BASE + 54,
TPM_INVALID_FAMILY = TPM_BASE + 55,
TPM_NO_NV_PERMISSION = TPM_BASE + 56,
TPM_REQUIRES_SIGN = TPM_BASE + 57,
TPM_KEY_NOTSUPPORTED = TPM_BASE + 58,
TPM_AUTH_CONFLICT = TPM_BASE + 59,
TPM_AREA_LOCKED = TPM_BASE + 60,
TPM_BAD_LOCALITY = TPM_BASE + 61,
TPM_READ_ONLY = TPM_BASE + 62,
TPM_PER_NOWRITE = TPM_BASE + 63,
TPM_FAMILY_COUNT = TPM_BASE + 64,
TPM_WRITE_LOCKED = TPM_BASE + 65,
TPM_BAD_ATTRIBUTES = TPM_BASE + 66,
TPM_INVALID_STRUCTURE = TPM_BASE + 67,
TPM_KEY_OWNER_CONTROL = TPM_BASE + 68,
TPM_BAD_COUNTER = TPM_BASE + 69,
TPM_NOT_FULLWRITE = TPM_BASE + 70,
TPM_CONTEXT_GAP = TPM_BASE + 71,
TPM_MAXNVWRITES = TPM_BASE + 72,
TPM_NOOPERATOR = TPM_BASE + 73,
TPM_RESOURCEMISSING = TPM_BASE + 74,
TPM_DELEGATE_LOCK = TPM_BASE + 75,
TPM_DELEGATE_FAMILY = TPM_BASE + 76,
TPM_DELEGATE_ADMIN = TPM_BASE + 77,
TPM_TRANSPORT_NOTEXCLUSIVE = TPM_BASE + 78,
TPM_OWNER_CONTROL = TPM_BASE + 79,
TPM_DAA_RESOURCES = TPM_BASE + 80,
TPM_DAA_INPUT_DATA0 = TPM_BASE + 81,
TPM_DAA_INPUT_DATA1 = TPM_BASE + 82,
TPM_DAA_ISSUER_SETTINGS = TPM_BASE + 83,
TPM_DAA_TPM_SETTINGS = TPM_BASE + 84,
TPM_DAA_STAGE = TPM_BASE + 85,
TPM_DAA_ISSUER_VALIDITY = TPM_BASE + 86,
TPM_DAA_WRONG_W = TPM_BASE + 87,
TPM_BAD_HANDLE = TPM_BASE + 88,
TPM_BAD_DELEGATE = TPM_BASE + 89,
TPM_BADCONTEXT = TPM_BASE + 90,
TPM_TOOMANYCONTEXTS = TPM_BASE + 91,
TPM_MA_TICKET_SIGNATURE = TPM_BASE + 92,
TPM_MA_DESTINATION = TPM_BASE + 93,
TPM_MA_SOURCE = TPM_BASE + 94,
TPM_MA_AUTHORITY = TPM_BASE + 95,
TPM_PERMANENTEK = TPM_BASE + 97,
TPM_BAD_SIGNATURE = TPM_BASE + 98,
TPM_NOCONTEXTSPACE = TPM_BASE + 99,
/* TPM-defined non-fatal errors */
TPM_RETRY = TPM_BASE + TPM_NON_FATAL,
TPM_NEEDS_SELFTEST = TPM_BASE + TPM_NON_FATAL + 1,
TPM_DOING_SELFTEST = TPM_BASE + TPM_NON_FATAL + 2,
TPM_DEFEND_LOCK_RUNNING = TPM_BASE + TPM_NON_FATAL + 3,
};
struct tpm_permanent_flags {
__be16 tag;
u8 disable;
u8 ownership;
u8 deactivated;
u8 read_pubek;
u8 disable_owner_clear;
u8 allow_maintenance;
u8 physical_presence_lifetime_lock;
u8 physical_presence_hw_enable;
u8 physical_presence_cmd_enable;
u8 cekp_used;
u8 tpm_post;
u8 tpm_post_lock;
u8 fips;
u8 operator;
u8 enable_revoke_ek;
u8 nv_locked;
u8 read_srk_pub;
u8 tpm_established;
u8 maintenance_done;
u8 disable_full_da_logic_info;
} __packed;
/* Max buffer size supported by our tpm */
#define TPM_DEV_BUFSIZE 1260
/**
* struct tpm_chip_priv - Information about a TPM, stored by the uclass
*
* These values must be set up by the device's probe() method before
* communcation is attempted. If the device has an xfer() method, this is
* not needed. There is no need to set up @buf.
*
* @duration_ms: Length of each duration type in milliseconds
* @retry_time_ms: Time to wait before retrying receive
*/
struct tpm_chip_priv {
uint duration_ms[TPM_DURATION_COUNT];
uint retry_time_ms;
u8 buf[TPM_DEV_BUFSIZE + sizeof(u8)]; /* Max buffer size + addr */
};
/**
* struct tpm_ops - low-level TPM operations
*
* These are designed to avoid loops and delays in the driver itself. These
* should be handled in the uclass.
*
* In gneral you should implement everything except xfer(). Where you need
* complete control of the transfer, then xfer() can be provided and will
* override the other methods.
*
* This interface is for low-level TPM access. It does not understand the
* concept of localities or the various TPM messages. That interface is
* defined in the functions later on in this file, but they all translate
* to bytes which are sent and received.
*/
struct tpm_ops {
/**
* open() - Request access to locality 0 for the caller
*
* After all commands have been completed the caller should call
* close().
*
* @dev: Device to close
* @return 0 ok OK, -ve on error
*/
int (*open)(struct udevice *dev);
/**
* close() - Close the current session
*
* Releasing the locked locality. Returns 0 on success, -ve 1 on
* failure (in case lock removal did not succeed).
*
* @dev: Device to close
* @return 0 ok OK, -ve on error
*/
int (*close)(struct udevice *dev);
/**
* get_desc() - Get a text description of the TPM
*
* @dev: Device to check
* @buf: Buffer to put the string
* @size: Maximum size of buffer
* @return length of string, or -ENOSPC it no space
*/
int (*get_desc)(struct udevice *dev, char *buf, int size);
/**
* send() - send data to the TPM
*
* @dev: Device to talk to
* @sendbuf: Buffer of the data to send
* @send_size: Size of the data to send
*
* Returns 0 on success or -ve on failure.
*/
int (*send)(struct udevice *dev, const uint8_t *sendbuf,
size_t send_size);
/**
* recv() - receive a response from the TPM
*
* @dev: Device to talk to
* @recvbuf: Buffer to save the response to
* @max_size: Maximum number of bytes to receive
*
* Returns number of bytes received on success, -EAGAIN if the TPM
* response is not ready, -EINTR if cancelled, or other -ve value on
* failure.
*/
int (*recv)(struct udevice *dev, uint8_t *recvbuf, size_t max_size);
/**
* cleanup() - clean up after an operation in progress
*
* This is called if receiving times out. The TPM may need to abort
* the current transaction if it did not complete, and make itself
* ready for another.
*
* @dev: Device to talk to
*/
int (*cleanup)(struct udevice *dev);
/**
* xfer() - send data to the TPM and get response
*
* This method is optional. If it exists it is used in preference
* to send(), recv() and cleanup(). It should handle all aspects of
* TPM communication for a single transfer.
*
* @dev: Device to talk to
* @sendbuf: Buffer of the data to send
* @send_size: Size of the data to send
* @recvbuf: Buffer to save the response to
* @recv_size: Pointer to the size of the response buffer
*
* Returns 0 on success (and places the number of response bytes at
* recv_size) or -ve on failure.
*/
int (*xfer)(struct udevice *dev, const uint8_t *sendbuf,
size_t send_size, uint8_t *recvbuf, size_t *recv_size);
};
#define tpm_get_ops(dev) ((struct tpm_ops *)device_get_ops(dev))
/**
* tpm_open() - Request access to locality 0 for the caller
*
* After all commands have been completed the caller is supposed to
* call tpm_close().
*
* Returns 0 on success, -ve on failure.
*/
int tpm_open(struct udevice *dev);
/**
* tpm_close() - Close the current session
*
* Releasing the locked locality. Returns 0 on success, -ve 1 on
* failure (in case lock removal did not succeed).
*/
int tpm_close(struct udevice *dev);
/**
* tpm_get_desc() - Get a text description of the TPM
*
* @dev: Device to check
* @buf: Buffer to put the string
* @size: Maximum size of buffer
* @return length of string, or -ENOSPC it no space
*/
int tpm_get_desc(struct udevice *dev, char *buf, int size);
/**
* tpm_xfer() - send data to the TPM and get response
*
* This first uses the device's send() method to send the bytes. Then it calls
* recv() to get the reply. If recv() returns -EAGAIN then it will delay a
* short time and then call recv() again.
*
* Regardless of whether recv() completes successfully, it will then call
* cleanup() to finish the transaction.
*
* Note that the outgoing data is inspected to determine command type
* (ordinal) and a timeout is used for that command type.
*
* @sendbuf - buffer of the data to send
* @send_size size of the data to send
* @recvbuf - memory to save the response to
* @recv_len - pointer to the size of the response buffer
*
* Returns 0 on success (and places the number of response bytes at
* recv_len) or -ve on failure.
*/
int tpm_xfer(struct udevice *dev, const uint8_t *sendbuf, size_t send_size,
uint8_t *recvbuf, size_t *recv_size);
/**
* Initialize TPM device. It must be called before any TPM commands.
*
* @return 0 on success, non-0 on error.
*/
int tpm_init(void);
/**
* Issue a TPM_Startup command.
*
* @param mode TPM startup mode
* @return return code of the operation
*/
uint32_t tpm_startup(enum tpm_startup_type mode);
/**
* Issue a TPM_SelfTestFull command.
*
* @return return code of the operation
*/
uint32_t tpm_self_test_full(void);
/**
* Issue a TPM_ContinueSelfTest command.
*
* @return return code of the operation
*/
uint32_t tpm_continue_self_test(void);
/**
* Issue a TPM_NV_DefineSpace command. The implementation is limited
* to specify TPM_NV_ATTRIBUTES and size of the area. The area index
* could be one of the special value listed in enum tpm_nv_index.
*
* @param index index of the area
* @param perm TPM_NV_ATTRIBUTES of the area
* @param size size of the area
* @return return code of the operation
*/
uint32_t tpm_nv_define_space(uint32_t index, uint32_t perm, uint32_t size);
/**
* Issue a TPM_NV_ReadValue command. This implementation is limited
* to read the area from offset 0. The area index could be one of
* the special value listed in enum tpm_nv_index.
*
* @param index index of the area
* @param data output buffer of the area contents
* @param count size of output buffer
* @return return code of the operation
*/
uint32_t tpm_nv_read_value(uint32_t index, void *data, uint32_t count);
/**
* Issue a TPM_NV_WriteValue command. This implementation is limited
* to write the area from offset 0. The area index could be one of
* the special value listed in enum tpm_nv_index.
*
* @param index index of the area
* @param data input buffer to be wrote to the area
* @param length length of data bytes of input buffer
* @return return code of the operation
*/
uint32_t tpm_nv_write_value(uint32_t index, const void *data, uint32_t length);
/**
* Issue a TPM_Extend command.
*
* @param index index of the PCR
* @param in_digest 160-bit value representing the event to be
* recorded
* @param out_digest 160-bit PCR value after execution of the
* command
* @return return code of the operation
*/
uint32_t tpm_extend(uint32_t index, const void *in_digest, void *out_digest);
/**
* Issue a TPM_PCRRead command.
*
* @param index index of the PCR
* @param data output buffer for contents of the named PCR
* @param count size of output buffer
* @return return code of the operation
*/
uint32_t tpm_pcr_read(uint32_t index, void *data, size_t count);
/**
* Issue a TSC_PhysicalPresence command. TPM physical presence flag
* is bit-wise OR'ed of flags listed in enum tpm_physical_presence.
*
* @param presence TPM physical presence flag
* @return return code of the operation
*/
uint32_t tpm_tsc_physical_presence(uint16_t presence);
/**
* Issue a TPM_ReadPubek command.
*
* @param data output buffer for the public endorsement key
* @param count size of ouput buffer
* @return return code of the operation
*/
uint32_t tpm_read_pubek(void *data, size_t count);
/**
* Issue a TPM_ForceClear command.
*
* @return return code of the operation
*/
uint32_t tpm_force_clear(void);
/**
* Issue a TPM_PhysicalEnable command.
*
* @return return code of the operation
*/
uint32_t tpm_physical_enable(void);
/**
* Issue a TPM_PhysicalDisable command.
*
* @return return code of the operation
*/
uint32_t tpm_physical_disable(void);
/**
* Issue a TPM_PhysicalSetDeactivated command.
*
* @param state boolean state of the deactivated flag
* @return return code of the operation
*/
uint32_t tpm_physical_set_deactivated(uint8_t state);
/**
* Issue a TPM_GetCapability command. This implementation is limited
* to query sub_cap index that is 4-byte wide.
*
* @param cap_area partition of capabilities
* @param sub_cap further definition of capability, which is
* limited to be 4-byte wide
* @param cap output buffer for capability information
* @param count size of ouput buffer
* @return return code of the operation
*/
uint32_t tpm_get_capability(uint32_t cap_area, uint32_t sub_cap,
void *cap, size_t count);
/**
* Issue a TPM_FlushSpecific command for a AUTH ressource.
*
* @param auth_handle handle of the auth session
* @return return code of the operation
*/
uint32_t tpm_terminate_auth_session(uint32_t auth_handle);
/**
* Issue a TPM_OIAP command to setup an object independant authorization
* session.
* Information about the session is stored internally.
* If there was already an OIAP session active it is terminated and a new
* session is set up.
*
* @param auth_handle pointer to the (new) auth handle or NULL.
* @return return code of the operation
*/
uint32_t tpm_oiap(uint32_t *auth_handle);
/**
* Ends an active OIAP session.
*
* @return return code of the operation
*/
uint32_t tpm_end_oiap(void);
/**
* Issue a TPM_LoadKey2 (Auth1) command using an OIAP session for authenticating
* the usage of the parent key.
*
* @param parent_handle handle of the parent key.
* @param key pointer to the key structure (TPM_KEY or TPM_KEY12).
* @param key_length size of the key structure
* @param parent_key_usage_auth usage auth for the parent key
* @param key_handle pointer to the key handle
* @return return code of the operation
*/
uint32_t tpm_load_key2_oiap(uint32_t parent_handle,
const void *key, size_t key_length,
const void *parent_key_usage_auth,
uint32_t *key_handle);
/**
* Issue a TPM_GetPubKey (Auth1) command using an OIAP session for
* authenticating the usage of the key.
*
* @param key_handle handle of the key
* @param usage_auth usage auth for the key
* @param pubkey pointer to the pub key buffer; may be NULL if the pubkey
* should not be stored.
* @param pubkey_len pointer to the pub key buffer len. On entry: the size of
* the provided pubkey buffer. On successful exit: the size
* of the stored TPM_PUBKEY structure (iff pubkey != NULL).
* @return return code of the operation
*/
uint32_t tpm_get_pub_key_oiap(uint32_t key_handle, const void *usage_auth,
void *pubkey, size_t *pubkey_len);
/**
* Get the TPM permanent flags value
*
* @param pflags Place to put permanent flags
* @return return code of the operation
*/
uint32_t tpm_get_permanent_flags(struct tpm_permanent_flags *pflags);
/**
* Get the TPM permissions
*
* @param perm Returns permissions value
* @return return code of the operation
*/
uint32_t tpm_get_permissions(uint32_t index, uint32_t *perm);
#endif /* __TPM_H */