u-boot

upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support

History

Wu, Josh bdfd59aa0f at91: atmel_nand: Update driver to support Programmable Multibit ECC controller The Programmable Multibit ECC (PMECC) controller is a programmable binary BCH(Bose, Chaudhuri and Hocquenghem) encoder and decoder. This controller can be used to support both SLC and MLC NAND Flash devices. It supports to generate ECC to correct 2, 4, 8, 12 or 24 bits of error per sector of data. To use PMECC in this driver, the user needs to set the PMECC correction capability, the sector size and ROM lookup table offsets in board config file. This driver is ported from Linux kernel atmel_nand PMECC patch. The main difference is in this version it uses registers structure access hardware instead of using macros. It is tested in 9x5 serial boards. Signed-off-by: Josh Wu <josh.wu@atmel.com> [rebase] Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>		12 years ago
..
SPL	…
device-tree-bindings	…
uImage.FIT	…
I2C_Edge_Conditions	…
README.440-DDR-performance	…
README.AMCC-eval-boards-cleanup	…
README.ARM-SoC	…
README.ARM-memory-map	…
README.AVR32	…
README.AVR32-port-muxing	…
README.JFFS2	…
README.JFFS2_NAND	…
README.LED	…
README.LED_display	…
README.MPC866	…
README.Modem	…
README.N1213	…
README.NDS32	…
README.NetConsole	…
README.OFT	…
README.POST	…
README.SNTP	…
README.SPL	…
README.VLAN	…
README.ag102	…
README.arm-caches	…
README.arm-relocation	…
README.at91	…
README.at91-soc	…
README.atmel_mci	…
README.atmel_pmecc	…
README.autoboot	…
README.bedbug	…
README.bitbangMII	…
README.blackfin	…
README.bus_vcxk	…
README.cfi	…
README.commands	…
README.commands.itest	…
README.commands.spl	…
README.console	…
README.davinci	…
README.davinci.nand_spl	…
README.designware_eth	…
README.dns	…
README.drivers.eth	…
README.enetaddr	…
README.fdt-control	…
README.fsl-ddr	…
README.fsl-hwconfig	…
README.generic_usb_ohci	…
README.hwconfig	…
README.idma2intr	…
README.imx5	…
README.imx31	…
README.imximage	…
README.iomux	…
README.kwbimage	…
README.link-local	…
README.lynxkdi	…
README.m28	…
README.m68k	…
README.marubun-pcmcia	…
README.menu	…
README.mips	…
README.mpc5xx	…
README.mpc74xx	…
README.mpc83xx.ddrecc	…
README.mpc83xxads	…
README.mpc85xx	…
README.mpc85xxads	…
README.mpc85xxcds	…
README.mx28_common	…
README.mx28evk	…
README.nand	…
README.nand-boot-ppc440	…
README.ne2000	…
README.ns9750dev	…
README.omap-ulpi-viewport	…
README.omap3	…
README.ppc440	…
README.pxe	…
README.s5pc1xx	…
README.sata	…
README.sched	…
README.scrapyard	…
README.serial_multi	…
README.sh	…
README.sha1	…
README.silent	…
README.spear	…
README.srio-boot-corenet	…
README.standalone	…
README.switch_config	…
README.ubi	…
README.ublimage	…
README.update	…
README.usb	…
README.video	…
README.zfs	…
feature-removal-schedule.txt	…
git-mailrc	…
kwboot.1	…
mkimage.1	…

README.zfs

This patch series adds support for ZFS listing and load to u-boot.

To Enable zfs ls and load commands, modify the board specific config file with
#define CONFIG_CMD_ZFS

Steps to test:

1. After applying the patch, zfs specific commands can be seen
   in the boot loader prompt using
        UBOOT #help

        zfsload- load binary file from a ZFS file system
        zfsls  - list files in a directory (default /)

2. To list the files in zfs pool, device or partition, execute
        zfsls <interface> <dev[:part]> [POOL/@/dir/file]
        For example:
        UBOOT #zfsls mmc 0:5 /rpool/@/usr/bin/

3. To read and load a file from an ZFS formatted partition to RAM, execute
        zfsload <interface> <dev[:part]> [addr] [filename] [bytes]
        For example:
        UBOOT #zfsload mmc 2:2 0x30007fc0 /rpool/@/boot/uImage

References :
	-- ZFS GRUB sources from Solaris GRUB-0.97
	-- GRUB Bazaar repository

Jorgen Lundman <lundman at lundman.net> 2012.