upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/doc/README.arm64

2.9 KiB

U-boot for arm64

Summary
=======
No hardware platform of arm64 is available now. The u-boot is
simulated on Foundation Model and Fast Model for ARMv8.

Notes
=====

1. Currenly, u-boot run at the highest exception level processor
supported and jump to EL2 or optionally EL1 before enter OS.

2. U-boot for arm64 is compiled with AArch64-gcc. AArch64-gcc
use rela relocation format, a tool(tools/relocate-rela) by Scott Wood
is used to encode the initial addend of rela to u-boot.bin. After running,
the u-boot will be relocated to destination again.

3. Fdt should be placed at a 2-megabyte boundary and within the first 512
megabytes from the start of the kernel image. So, fdt_high should be
defined specially.
Please reference linux/Documentation/arm64/booting.txt for detail.

4. Spin-table is used to wake up secondary processors. One location
(or per processor location) is defined to hold the kernel entry point
for secondary processors. It must be ensured that the location is
accessible and zero immediately after secondary processor
enter slave_cpu branch execution in start.S. The location address
is encoded in cpu node of DTS. Linux kernel store the entry point
of secondary processors to it and send event to wakeup secondary
processors.
Please reference linux/Documentation/arm64/booting.txt for detail.

5. Generic board is supported.

6. CONFIG_ARM64 instead of CONFIG_ARMV8 is used to distinguish aarch64 and
aarch32 specific codes.

7. CONFIG_SYS_FULL_VA is used to enable 2-level page tables. For cores
supporting 64k pages it allows usage of full 48+ virtual/physical addresses

Enabling this option requires the following ones to be defined:
- CONFIG_SYS_MEM_MAP - an array of 'struct mm_region' describing the
system memory map (start, length, attributes)
- CONFIG_SYS_MEM_MAP_SIZE - number of entries in CONFIG_SYS_MEM_MAP
- CONFIG_SYS_PTL1_ENTRIES - number of 1st level page table entries
- CONFIG_SYS_PTL2_ENTRIES - number of 1nd level page table entries
for the largest CONFIG_SYS_MEM_MAP entry
- CONFIG_COREID_MASK - the mask value used to get the core from the
MPIDR_EL1 register
- CONFIG_SYS_PTL2_BITS - number of bits addressed by the 2nd level
page tables
- CONFIG_SYS_BLOCK_SHIFT - number of bits addressed by a single block
entry from L2 page tables
- CONFIG_SYS_PGTABLE_SIZE - total size of the page table
- CONFIG_SYS_TCR_EL{1,2,3}_IPS_BITS - the IPS field of the TCR_EL{1,2,3}




Contributor
===========
Tom Rini <trini@ti.com>
Scott Wood <scottwood@freescale.com>
York Sun <yorksun@freescale.com>
Simon Glass <sjg@chromium.org>
Sharma Bhupesh <bhupesh.sharma@freescale.com>
Rob Herring <robherring2@gmail.com>
Sergey Temerkhanov <s.temerkhanov@gmail.com>