upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/xilinx/zynq/zynq-zc706/ps7_init_gpl.h

117 lines
3.6 KiB

/******************************************************************************
*
* (c) Copyright 2010-2014 Xilinx, Inc. All rights reserved.
*
* SPDX-License-Identifier: GPL-2.0+
*
*
*******************************************************************************/
/****************************************************************************/
/**
*
* @file ps7_init.h
*
* This file can be included in FSBL code
* to get prototype of ps7_init() function
* and error codes
*
*****************************************************************************/
#ifdef __cplusplus
extern "C" {
#endif
//typedef unsigned int u32;
/** do we need to make this name more unique ? **/
//extern u32 ps7_init_data[];
extern unsigned long * ps7_ddr_init_data;
extern unsigned long * ps7_mio_init_data;
extern unsigned long * ps7_pll_init_data;
extern unsigned long * ps7_clock_init_data;
extern unsigned long * ps7_peripherals_init_data;
#define OPCODE_EXIT 0U
#define OPCODE_CLEAR 1U
#define OPCODE_WRITE 2U
#define OPCODE_MASKWRITE 3U
#define OPCODE_MASKPOLL 4U
#define OPCODE_MASKDELAY 5U
#define NEW_PS7_ERR_CODE 1
/* Encode number of arguments in last nibble */
#define EMIT_EXIT() ( (OPCODE_EXIT << 4 ) | 0 )
#define EMIT_CLEAR(addr) ( (OPCODE_CLEAR << 4 ) | 1 ) , addr
#define EMIT_WRITE(addr,val) ( (OPCODE_WRITE << 4 ) | 2 ) , addr, val
#define EMIT_MASKWRITE(addr,mask,val) ( (OPCODE_MASKWRITE << 4 ) | 3 ) , addr, mask, val
#define EMIT_MASKPOLL(addr,mask) ( (OPCODE_MASKPOLL << 4 ) | 2 ) , addr, mask
#define EMIT_MASKDELAY(addr,mask) ( (OPCODE_MASKDELAY << 4 ) | 2 ) , addr, mask
/* Returns codes of PS7_Init */
#define PS7_INIT_SUCCESS (0) // 0 is success in good old C
#define PS7_INIT_CORRUPT (1) // 1 the data is corrupted, and slcr reg are in corrupted state now
#define PS7_INIT_TIMEOUT (2) // 2 when a poll operation timed out
#define PS7_POLL_FAILED_DDR_INIT (3) // 3 when a poll operation timed out for ddr init
#define PS7_POLL_FAILED_DMA (4) // 4 when a poll operation timed out for dma done bit
#define PS7_POLL_FAILED_PLL (5) // 5 when a poll operation timed out for pll sequence init
/* Silicon Versions */
#define PCW_SILICON_VERSION_1 0
#define PCW_SILICON_VERSION_2 1
#define PCW_SILICON_VERSION_3 2
/* This flag to be used by FSBL to check whether ps7_post_config() proc exixts */
#define PS7_POST_CONFIG
/* Freq of all peripherals */
#define APU_FREQ 666666687
#define DDR_FREQ 533333374
#define DCI_FREQ 10158731
#define QSPI_FREQ 200000000
#define SMC_FREQ 10000000
#define ENET0_FREQ 25000000
#define ENET1_FREQ 10000000
#define USB0_FREQ 60000000
#define USB1_FREQ 60000000
#define SDIO_FREQ 50000000
#define UART_FREQ 50000000
#define SPI_FREQ 10000000
#define I2C_FREQ 111111115
#define WDT_FREQ 111111115
#define TTC_FREQ 50000000
#define CAN_FREQ 10000000
#define PCAP_FREQ 200000000
#define TPIU_FREQ 200000000
#define FPGA0_FREQ 50000000
#define FPGA1_FREQ 50000000
#define FPGA2_FREQ 50000000
#define FPGA3_FREQ 50000000
/* For delay calculation using global registers*/
#define SCU_GLOBAL_TIMER_COUNT_L32 0xF8F00200
#define SCU_GLOBAL_TIMER_COUNT_U32 0xF8F00204
#define SCU_GLOBAL_TIMER_CONTROL 0xF8F00208
#define SCU_GLOBAL_TIMER_AUTO_INC 0xF8F00218
int ps7_config( unsigned long*);
int ps7_init();
int ps7_post_config();
int ps7_debug();
char* getPS7MessageInfo(unsigned key);
void perf_start_clock(void);
void perf_disable_clock(void);
void perf_reset_clock(void);
void perf_reset_and_start_timer();
int get_number_of_cycles_for_delay(unsigned int delay);
#ifdef __cplusplus
}
#endif