upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/common/init/board_init.c

153 lines
4.5 KiB

/*
* Code shared between SPL and U-Boot proper
*
* Copyright (c) 2015 Google, Inc
* Written by Simon Glass <sjg@chromium.org>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
DECLARE_GLOBAL_DATA_PTR;
/*
* It isn't trivial to figure out whether memcpy() exists. The arch-specific
* memcpy() is not normally available in SPL due to code size.
*/
#if !defined(CONFIG_SPL_BUILD) || \
(defined(CONFIG_SPL_LIBGENERIC_SUPPORT) && \
!defined(CONFIG_USE_ARCH_MEMSET))
#define _USE_MEMCPY
#endif
/* Unfortunately x86 or ARM can't compile this code as gd cannot be assigned */
#if !defined(CONFIG_X86) && !defined(CONFIG_ARM)
__weak void arch_setup_gd(struct global_data *gd_ptr)
{
gd = gd_ptr;
}
#endif /* !CONFIG_X86 && !CONFIG_ARM */
/*
* Allocate reserved space for use as 'globals' from 'top' address and
* return 'bottom' address of allocated space
*
* Notes:
*
* Actual reservation cannot be done from within this function as
* it requires altering the C stack pointer, so this will be done by
* the caller upon return from this function.
*
* IMPORTANT:
*
* Alignment constraints may differ for each 'chunk' allocated. For now:
*
* - GD is aligned down on a 16-byte boundary
*
* - the early malloc arena is not aligned, therefore it follows the stack
* alignment constraint of the architecture for which we are bulding.
*
* - GD is allocated last, so that the return value of this functions is
* both the bottom of the reserved area and the address of GD, should
* the calling context need it.
*/
ulong board_init_f_alloc_reserve(ulong top)
{
/* Reserve early malloc arena */
#if defined(CONFIG_SYS_MALLOC_F)
top -= CONFIG_SYS_MALLOC_F_LEN;
#endif
/* LAST : reserve GD (rounded up to a multiple of 16 bytes) */
top = rounddown(top-sizeof(struct global_data), 16);
return top;
}
/*
* Initialize reserved space (which has been safely allocated on the C
* stack from the C runtime environment handling code).
*
* Notes:
*
* Actual reservation was done by the caller; the locations from base
* to base+size-1 (where 'size' is the value returned by the allocation
* function above) can be accessed freely without risk of corrupting the
* C runtime environment.
*
* IMPORTANT:
*
* Upon return from the allocation function above, on some architectures
* the caller will set gd to the lowest reserved location. Therefore, in
* this initialization function, the global data MUST be placed at base.
*
* ALSO IMPORTANT:
*
* On some architectures, gd will already be good when entering this
* function. On others, it will only be good once arch_setup_gd() returns.
* Therefore, global data accesses must be done:
*
* - through gd_ptr if before the call to arch_setup_gd();
*
* - through gd once arch_setup_gd() has been called.
*
* Do not use 'gd->' until arch_setup_gd() has been called!
*
* IMPORTANT TOO:
*
* Initialization for each "chunk" (GD, early malloc arena...) ends with
* an incrementation line of the form 'base += <some size>'. The last of
* these incrementations seems useless, as base will not be used any
* more after this incrementation; but if/when a new "chunk" is appended,
* this increment will be essential as it will give base right value for
* this new chunk (which will have to end with its own incrementation
* statement). Besides, the compiler's optimizer will silently detect
* and remove the last base incrementation, therefore leaving that last
* (seemingly useless) incrementation causes no code increase.
*/
void board_init_f_init_reserve(ulong base)
{
struct global_data *gd_ptr;
#ifndef _USE_MEMCPY
int *ptr;
#endif
/*
* clear GD entirely and set it up.
* Use gd_ptr, as gd may not be properly set yet.
*/
gd_ptr = (struct global_data *)base;
/* zero the area */
#ifdef _USE_MEMCPY
memset(gd_ptr, '\0', sizeof(*gd));
#else
for (ptr = (int *)gd_ptr; ptr < (int *)(gd_ptr + 1); )
*ptr++ = 0;
#endif
/* set GD unless architecture did it already */
#if !defined(CONFIG_ARM)
arch_setup_gd(gd_ptr);
#endif
/* next alloc will be higher by one GD plus 16-byte alignment */
base += roundup(sizeof(struct global_data), 16);
/*
* record early malloc arena start.
* Use gd as it is now properly set for all architectures.
*/
#if defined(CONFIG_SYS_MALLOC_F)
/* go down one 'early malloc arena' */
gd->malloc_base = base;
/* next alloc will be higher by one 'early malloc arena' size */
base += CONFIG_SYS_MALLOC_F_LEN;
#endif
}
/*
* Board-specific Platform code can reimplement show_boot_progress () if needed
*/
__weak void show_boot_progress(int val) {}