upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/doc/README.sata

1.5 KiB

1. SATA usage in U-boot

Two ways to operate the hard disk

* Raw read/write block from/to SATA hard disk;
* ext2load read file from ext2 filesytem in hard disk

1.0 How to know the information of SATA hard disk?

=> sata info

SATA device 0: Model: ST3320620AS Firm: 3.AAD Ser#: 4QF01ZTN
Type: Hard Disk
Supports 48-bit addressing
Capacity: 305245.3 MB = 298.0 GB (625142448 x 512)

1.1 How to save the kernel, filesystem, dtb to SATA hard disk with raw?

Notes: 0x1000 sectors = 2 MBytes

wirte kernel
=> tftp 40000 /tftpboot/uImage.837x
=> sata write 40000 0 2000

write ramdisk
=> tftp 40000 /tftpboot/ramdisk.837x
=> sata write 40000 2000 8000

write dtb
=> tftp 40000 /tftpboot/mpc837xemds.dtb
=> sata write 40000 a000 1000

1.2 How to read the kernel, filesystem, dtb from SATA hard disk with raw?

load kernel
=> sata read 200000 0 2000

load ramdisk
=> sata read 1000000 2000 8000

load dtb
=> sata read 2000000 a000 1000

boot
=> bootm 200000 1000000 2000000

1.3 How to load image from ext2 filesystem in U-boot?

U-boot doesn't support ext2 write to hard disk, so
you have to write the image to hard disk under Linux env,
before you load image from ext2 filesystem.

=> ext2ls sata 0:1 /
<DIR> 4096 .
<DIR> 4096 ..
<DIR> 16384 lost+found
1352023 uImage.837x
3646377 ramdisk.837x
12288 mpc837xemds.dtb
12 hello.txt

=> ext2load sata 0:1 200000 /uImage.837x

=> ext2load sata 0:1 1000000 /ramdisk.837x

=> ext2load sata 0:1 2000000 /mpc837xemds.dtb

=> bootm 200000 1000000 2000000