upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/esd/cpci440/cpci440.c

139 lines
4.9 KiB

/*
* (C) Copyright 2002
* Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/processor.h>
long int fixed_sdram( void );
int board_early_init_f (void)
{
uint reg;
/*--------------------------------------------------------------------
* Setup the external bus controller/chip selects
*-------------------------------------------------------------------*/
mtdcr( ebccfga, xbcfg );
reg = mfdcr( ebccfgd );
mtdcr( ebccfgd, reg | 0x04000000 ); /* Set ATC */
mtebc( pb0ap, 0x92015480 ); /* FLASH/SRAM */
mtebc( pb0cr, 0xFF87A000 ); /* BAS=0xff8 8MB R/W 16-bit */
/* test-only: other regs still missing... */
/*--------------------------------------------------------------------
* Setup the interrupt controller polarities, triggers, etc.
*-------------------------------------------------------------------*/
mtdcr( uic0sr, 0xffffffff ); /* clear all */
mtdcr( uic0er, 0x00000000 ); /* disable all */
mtdcr( uic0cr, 0x00000009 ); /* SMI & UIC1 crit are critical */
mtdcr( uic0pr, 0xfffffe13 ); /* per ref-board manual */
mtdcr( uic0tr, 0x01c00008 ); /* per ref-board manual */
mtdcr( uic0vr, 0x00000001 ); /* int31 highest, base=0x000 */
mtdcr( uic0sr, 0xffffffff ); /* clear all */
mtdcr( uic1sr, 0xffffffff ); /* clear all */
mtdcr( uic1er, 0x00000000 ); /* disable all */
mtdcr( uic1cr, 0x00000000 ); /* all non-critical */
mtdcr( uic1pr, 0xffffe0ff ); /* per ref-board manual */
mtdcr( uic1tr, 0x00ffc000 ); /* per ref-board manual */
mtdcr( uic1vr, 0x00000001 ); /* int31 highest, base=0x000 */
mtdcr( uic1sr, 0xffffffff ); /* clear all */
return 0;
}
int checkboard (void)
{
sys_info_t sysinfo;
get_sys_info(&sysinfo);
printf("Board: esd CPCI-440\n");
printf("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz/1000000);
printf("\tCPU: %lu MHz\n", sysinfo.freqProcessor/1000000);
printf("\tPLB: %lu MHz\n", sysinfo.freqPLB/1000000);
printf("\tOPB: %lu MHz\n", sysinfo.freqOPB/1000000);
printf("\tEPB: %lu MHz\n", sysinfo.freqEPB/1000000);
return (0);
}
long int initdram (int board_type)
{
long dram_size = 0;
dram_size = fixed_sdram();
return dram_size;
}
/*************************************************************************
* fixed sdram init -- doesn't use serial presence detect.
*
* Assumes: 64 MB, non-ECC, non-registered
* PLB @ 133 MHz
*
************************************************************************/
long int fixed_sdram( void )
{
uint reg;
/*--------------------------------------------------------------------
* Setup some default
*------------------------------------------------------------------*/
mtsdram( mem_uabba, 0x00000000 ); /* ubba=0 (default) */
mtsdram( mem_slio, 0x00000000 ); /* rdre=0 wrre=0 rarw=0 */
mtsdram( mem_devopt,0x00000000 ); /* dll=0 ds=0 (normal) */
mtsdram( mem_wddctr,0x40000000 ); /* wrcp=0 dcd=0 */
mtsdram( mem_clktr, 0x40000000 ); /* clkp=1 (90 deg wr) dcdt=0 */
/*--------------------------------------------------------------------
* Setup for board-specific specific mem
*------------------------------------------------------------------*/
/*
* Following for CAS Latency = 2.5 @ 133 MHz PLB
*/
mtsdram( mem_b0cr, 0x00082001 );/* SDBA=0x000, 64MB, Mode 2, enabled*/
mtsdram( mem_tr0, 0x410a4012 );/* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */
/* RA=10 RD=3 */
mtsdram( mem_tr1, 0x8080082f );/* SS=T2 SL=STAGE 3 CD=1 CT=0x02f */
mtsdram( mem_rtr, 0x08200000 );/* Rate 15.625 ns @ 133 MHz PLB */
mtsdram( mem_cfg1, 0x00000000 );/* Self-refresh exit, disable PM */
udelay( 400 ); /* Delay 200 usecs (min) */
/*--------------------------------------------------------------------
* Enable the controller, then wait for DCEN to complete
*------------------------------------------------------------------*/
mtsdram( mem_cfg0, 0x86000000 );/* DCEN=1, PMUD=1, 64-bit */
for(;;)
{
mfsdram( mem_mcsts, reg );
if( reg & 0x80000000 )
break;
}
return( 64 * 1024 * 1024 ); /* 64 MB */
}