upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
283 lines
7.7 KiB
283 lines
7.7 KiB
/*
|
|
* Board functions for TI AM335X based draco board
|
|
* (C) Copyright 2013 Siemens Schweiz AG
|
|
* (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
|
|
*
|
|
* Based on:
|
|
*
|
|
* Board functions for TI AM335X based boards
|
|
* u-boot:/board/ti/am335x/board.c
|
|
*
|
|
* Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <errno.h>
|
|
#include <spl.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/omap.h>
|
|
#include <asm/arch/ddr_defs.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/mmc_host_def.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/io.h>
|
|
#include <asm/emif.h>
|
|
#include <asm/gpio.h>
|
|
#include <i2c.h>
|
|
#include <miiphy.h>
|
|
#include <cpsw.h>
|
|
#include <watchdog.h>
|
|
#include "board.h"
|
|
#include "../common/factoryset.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
static struct draco_baseboard_id __attribute__((section(".data"))) settings;
|
|
|
|
#if DDR_PLL_FREQ == 303
|
|
/* Default@303MHz-i0 */
|
|
const struct ddr3_data ddr3_default = {
|
|
0x33524444, 0x56312e35, 0x0080, 0x0000, 0x003A, 0x003F, 0x009F,
|
|
0x0079, 0x0888A39B, 0x26247FDA, 0x501F821F, 0x00100206, 0x61A44A32,
|
|
0x0000093B, 0x0000014A,
|
|
"default name @303MHz \0",
|
|
"default marking \0",
|
|
};
|
|
#elif DDR_PLL_FREQ == 400
|
|
/* Default@400MHz-i0 */
|
|
const struct ddr3_data ddr3_default = {
|
|
0x33524444, 0x56312e35, 0x0080, 0x0000, 0x0039, 0x0046, 0x00ab,
|
|
0x0080, 0x0AAAA4DB, 0x26307FDA, 0x501F821F, 0x00100207, 0x61A45232,
|
|
0x00000618, 0x0000014A,
|
|
"default name @400MHz \0",
|
|
"default marking \0",
|
|
};
|
|
#endif
|
|
|
|
static void set_default_ddr3_timings(void)
|
|
{
|
|
printf("Set default DDR3 settings\n");
|
|
settings.ddr3 = ddr3_default;
|
|
}
|
|
|
|
static void print_ddr3_timings(void)
|
|
{
|
|
printf("\nDDR3\n");
|
|
printf("clock:\t\t%d MHz\n", DDR_PLL_FREQ);
|
|
printf("device:\t\t%s\n", settings.ddr3.manu_name);
|
|
printf("marking:\t%s\n", settings.ddr3.manu_marking);
|
|
printf("timing parameters\n");
|
|
printf("diff\teeprom\tdefault\n");
|
|
PRINTARGS(magic);
|
|
PRINTARGS(version);
|
|
PRINTARGS(ddr3_sratio);
|
|
PRINTARGS(iclkout);
|
|
|
|
PRINTARGS(dt0rdsratio0);
|
|
PRINTARGS(dt0wdsratio0);
|
|
PRINTARGS(dt0fwsratio0);
|
|
PRINTARGS(dt0wrsratio0);
|
|
|
|
PRINTARGS(sdram_tim1);
|
|
PRINTARGS(sdram_tim2);
|
|
PRINTARGS(sdram_tim3);
|
|
|
|
PRINTARGS(emif_ddr_phy_ctlr_1);
|
|
|
|
PRINTARGS(sdram_config);
|
|
PRINTARGS(ref_ctrl);
|
|
PRINTARGS(ioctr_val);
|
|
}
|
|
|
|
static void print_chip_data(void)
|
|
{
|
|
printf("\nCPU BOARD\n");
|
|
printf("device: \t'%s'\n", settings.chip.sdevname);
|
|
printf("hw version: \t'%s'\n", settings.chip.shwver);
|
|
}
|
|
#endif /* CONFIG_SPL_BUILD */
|
|
|
|
/*
|
|
* Read header information from EEPROM into global structure.
|
|
*/
|
|
static int read_eeprom(void)
|
|
{
|
|
/* Check if baseboard eeprom is available */
|
|
if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) {
|
|
printf("Could not probe the EEPROM; something fundamentally wrong on the I2C bus.\n");
|
|
return 1;
|
|
}
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
/* Read Siemens eeprom data (DDR3) */
|
|
if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, EEPROM_ADDR_DDR3, 2,
|
|
(uchar *)&settings.ddr3, sizeof(struct ddr3_data))) {
|
|
printf("Could not read the EEPROM; something fundamentally wrong on the I2C bus.\nUse default DDR3 timings\n");
|
|
set_default_ddr3_timings();
|
|
}
|
|
/* Read Siemens eeprom data (CHIP) */
|
|
if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, EEPROM_ADDR_CHIP, 2,
|
|
(uchar *)&settings.chip, sizeof(settings.chip)))
|
|
printf("Could not read chip settings\n");
|
|
|
|
if (ddr3_default.magic == settings.ddr3.magic &&
|
|
ddr3_default.version == settings.ddr3.version) {
|
|
printf("Using DDR3 settings from EEPROM\n");
|
|
} else {
|
|
if (ddr3_default.magic != settings.ddr3.magic)
|
|
printf("Warning: No valid DDR3 data in eeprom.\n");
|
|
if (ddr3_default.version != settings.ddr3.version)
|
|
printf("Warning: DDR3 data version does not match.\n");
|
|
|
|
printf("Using default settings\n");
|
|
set_default_ddr3_timings();
|
|
}
|
|
|
|
if (MAGIC_CHIP == settings.chip.magic)
|
|
print_chip_data();
|
|
else
|
|
printf("Warning: No chip data in eeprom\n");
|
|
|
|
print_ddr3_timings();
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
static void board_init_ddr(void)
|
|
{
|
|
struct emif_regs draco_ddr3_emif_reg_data = {
|
|
.zq_config = 0x50074BE4,
|
|
};
|
|
|
|
struct ddr_data draco_ddr3_data = {
|
|
};
|
|
|
|
struct cmd_control draco_ddr3_cmd_ctrl_data = {
|
|
};
|
|
|
|
struct ctrl_ioregs draco_ddr3_ioregs = {
|
|
};
|
|
|
|
/* pass values from eeprom */
|
|
draco_ddr3_emif_reg_data.sdram_tim1 = settings.ddr3.sdram_tim1;
|
|
draco_ddr3_emif_reg_data.sdram_tim2 = settings.ddr3.sdram_tim2;
|
|
draco_ddr3_emif_reg_data.sdram_tim3 = settings.ddr3.sdram_tim3;
|
|
draco_ddr3_emif_reg_data.emif_ddr_phy_ctlr_1 =
|
|
settings.ddr3.emif_ddr_phy_ctlr_1;
|
|
draco_ddr3_emif_reg_data.sdram_config = settings.ddr3.sdram_config;
|
|
draco_ddr3_emif_reg_data.ref_ctrl = settings.ddr3.ref_ctrl;
|
|
|
|
draco_ddr3_data.datardsratio0 = settings.ddr3.dt0rdsratio0;
|
|
draco_ddr3_data.datawdsratio0 = settings.ddr3.dt0wdsratio0;
|
|
draco_ddr3_data.datafwsratio0 = settings.ddr3.dt0fwsratio0;
|
|
draco_ddr3_data.datawrsratio0 = settings.ddr3.dt0wrsratio0;
|
|
|
|
draco_ddr3_cmd_ctrl_data.cmd0csratio = settings.ddr3.ddr3_sratio;
|
|
draco_ddr3_cmd_ctrl_data.cmd0iclkout = settings.ddr3.iclkout;
|
|
draco_ddr3_cmd_ctrl_data.cmd1csratio = settings.ddr3.ddr3_sratio;
|
|
draco_ddr3_cmd_ctrl_data.cmd1iclkout = settings.ddr3.iclkout;
|
|
draco_ddr3_cmd_ctrl_data.cmd2csratio = settings.ddr3.ddr3_sratio;
|
|
draco_ddr3_cmd_ctrl_data.cmd2iclkout = settings.ddr3.iclkout;
|
|
|
|
draco_ddr3_ioregs.cm0ioctl = settings.ddr3.ioctr_val,
|
|
draco_ddr3_ioregs.cm1ioctl = settings.ddr3.ioctr_val,
|
|
draco_ddr3_ioregs.cm2ioctl = settings.ddr3.ioctr_val,
|
|
draco_ddr3_ioregs.dt0ioctl = settings.ddr3.ioctr_val,
|
|
draco_ddr3_ioregs.dt1ioctl = settings.ddr3.ioctr_val,
|
|
|
|
config_ddr(DDR_PLL_FREQ, &draco_ddr3_ioregs, &draco_ddr3_data,
|
|
&draco_ddr3_cmd_ctrl_data, &draco_ddr3_emif_reg_data, 0);
|
|
}
|
|
|
|
static void spl_siemens_board_init(void)
|
|
{
|
|
return;
|
|
}
|
|
#endif /* if def CONFIG_SPL_BUILD */
|
|
|
|
#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
|
|
(defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
|
|
static void cpsw_control(int enabled)
|
|
{
|
|
/* VTP can be added here */
|
|
|
|
return;
|
|
}
|
|
|
|
static struct cpsw_slave_data cpsw_slaves[] = {
|
|
{
|
|
.slave_reg_ofs = 0x208,
|
|
.sliver_reg_ofs = 0xd80,
|
|
.phy_addr = 0,
|
|
.phy_if = PHY_INTERFACE_MODE_MII,
|
|
},
|
|
};
|
|
|
|
static struct cpsw_platform_data cpsw_data = {
|
|
.mdio_base = CPSW_MDIO_BASE,
|
|
.cpsw_base = CPSW_BASE,
|
|
.mdio_div = 0xff,
|
|
.channels = 4,
|
|
.cpdma_reg_ofs = 0x800,
|
|
.slaves = 1,
|
|
.slave_data = cpsw_slaves,
|
|
.ale_reg_ofs = 0xd00,
|
|
.ale_entries = 1024,
|
|
.host_port_reg_ofs = 0x108,
|
|
.hw_stats_reg_ofs = 0x900,
|
|
.bd_ram_ofs = 0x2000,
|
|
.mac_control = (1 << 5),
|
|
.control = cpsw_control,
|
|
.host_port_num = 0,
|
|
.version = CPSW_CTRL_VERSION_2,
|
|
};
|
|
|
|
#if defined(CONFIG_DRIVER_TI_CPSW) || \
|
|
(defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET))
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
|
|
int n = 0;
|
|
int rv;
|
|
|
|
factoryset_setenv();
|
|
|
|
/* Set rgmii mode and enable rmii clock to be sourced from chip */
|
|
writel((RMII_MODE_ENABLE | RMII_CHIPCKL_ENABLE), &cdev->miisel);
|
|
|
|
rv = cpsw_register(&cpsw_data);
|
|
if (rv < 0)
|
|
printf("Error %d registering CPSW switch\n", rv);
|
|
else
|
|
n += rv;
|
|
return n;
|
|
}
|
|
|
|
static int do_switch_reset(cmd_tbl_t *cmdtp, int flag, int argc,
|
|
char *const argv[])
|
|
{
|
|
/* Reset SMSC LAN9303 switch for default configuration */
|
|
gpio_request(GPIO_LAN9303_NRST, "nRST");
|
|
gpio_direction_output(GPIO_LAN9303_NRST, 0);
|
|
/* assert active low reset for 200us */
|
|
udelay(200);
|
|
gpio_set_value(GPIO_LAN9303_NRST, 1);
|
|
|
|
return 0;
|
|
};
|
|
|
|
U_BOOT_CMD(
|
|
switch_rst, CONFIG_SYS_MAXARGS, 1, do_switch_reset,
|
|
"Reset LAN9303 switch via its reset pin",
|
|
""
|
|
);
|
|
#endif /* #if defined(CONFIG_DRIVER_TI_CPSW) */
|
|
#endif /* #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) */
|
|
|
|
#include "../common/board.c"
|
|
|