upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
373 lines
9.0 KiB
373 lines
9.0 KiB
/*
|
|
* NVIDIA Tegra20 GPIO handling.
|
|
* (C) Copyright 2010-2012
|
|
* NVIDIA Corporation <www.nvidia.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
/*
|
|
* Based on (mostly copied from) kw_gpio.c based Linux 2.6 kernel driver.
|
|
* Tom Warren (twarren@nvidia.com)
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <malloc.h>
|
|
#include <errno.h>
|
|
#include <fdtdec.h>
|
|
#include <asm/io.h>
|
|
#include <asm/bitops.h>
|
|
#include <asm/arch/tegra.h>
|
|
#include <asm/gpio.h>
|
|
#include <dm/device-internal.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
enum {
|
|
TEGRA_CMD_INFO,
|
|
TEGRA_CMD_PORT,
|
|
TEGRA_CMD_OUTPUT,
|
|
TEGRA_CMD_INPUT,
|
|
};
|
|
|
|
struct tegra_gpio_platdata {
|
|
struct gpio_ctlr_bank *bank;
|
|
const char *port_name; /* Name of port, e.g. "B" */
|
|
int base_gpio; /* Port number for this port (0, 1,.., n-1) */
|
|
};
|
|
|
|
/* Information about each port at run-time */
|
|
struct tegra_port_info {
|
|
struct gpio_ctlr_bank *bank;
|
|
int base_gpio; /* Port number for this port (0, 1,.., n-1) */
|
|
};
|
|
|
|
/* Return config of pin 'gpio' as GPIO (1) or SFPIO (0) */
|
|
static int get_config(unsigned gpio)
|
|
{
|
|
struct gpio_ctlr *ctlr = (struct gpio_ctlr *)NV_PA_GPIO_BASE;
|
|
struct gpio_ctlr_bank *bank = &ctlr->gpio_bank[GPIO_BANK(gpio)];
|
|
u32 u;
|
|
int type;
|
|
|
|
u = readl(&bank->gpio_config[GPIO_PORT(gpio)]);
|
|
type = (u >> GPIO_BIT(gpio)) & 1;
|
|
|
|
debug("get_config: port = %d, bit = %d is %s\n",
|
|
GPIO_FULLPORT(gpio), GPIO_BIT(gpio), type ? "GPIO" : "SFPIO");
|
|
|
|
return type;
|
|
}
|
|
|
|
/* Config pin 'gpio' as GPIO or SFPIO, based on 'type' */
|
|
static void set_config(unsigned gpio, int type)
|
|
{
|
|
struct gpio_ctlr *ctlr = (struct gpio_ctlr *)NV_PA_GPIO_BASE;
|
|
struct gpio_ctlr_bank *bank = &ctlr->gpio_bank[GPIO_BANK(gpio)];
|
|
u32 u;
|
|
|
|
debug("set_config: port = %d, bit = %d, %s\n",
|
|
GPIO_FULLPORT(gpio), GPIO_BIT(gpio), type ? "GPIO" : "SFPIO");
|
|
|
|
u = readl(&bank->gpio_config[GPIO_PORT(gpio)]);
|
|
if (type) /* GPIO */
|
|
u |= 1 << GPIO_BIT(gpio);
|
|
else
|
|
u &= ~(1 << GPIO_BIT(gpio));
|
|
writel(u, &bank->gpio_config[GPIO_PORT(gpio)]);
|
|
}
|
|
|
|
/* Return GPIO pin 'gpio' direction - 0 = input or 1 = output */
|
|
static int get_direction(unsigned gpio)
|
|
{
|
|
struct gpio_ctlr *ctlr = (struct gpio_ctlr *)NV_PA_GPIO_BASE;
|
|
struct gpio_ctlr_bank *bank = &ctlr->gpio_bank[GPIO_BANK(gpio)];
|
|
u32 u;
|
|
int dir;
|
|
|
|
u = readl(&bank->gpio_dir_out[GPIO_PORT(gpio)]);
|
|
dir = (u >> GPIO_BIT(gpio)) & 1;
|
|
|
|
debug("get_direction: port = %d, bit = %d, %s\n",
|
|
GPIO_FULLPORT(gpio), GPIO_BIT(gpio), dir ? "OUT" : "IN");
|
|
|
|
return dir;
|
|
}
|
|
|
|
/* Config GPIO pin 'gpio' as input or output (OE) as per 'output' */
|
|
static void set_direction(unsigned gpio, int output)
|
|
{
|
|
struct gpio_ctlr *ctlr = (struct gpio_ctlr *)NV_PA_GPIO_BASE;
|
|
struct gpio_ctlr_bank *bank = &ctlr->gpio_bank[GPIO_BANK(gpio)];
|
|
u32 u;
|
|
|
|
debug("set_direction: port = %d, bit = %d, %s\n",
|
|
GPIO_FULLPORT(gpio), GPIO_BIT(gpio), output ? "OUT" : "IN");
|
|
|
|
u = readl(&bank->gpio_dir_out[GPIO_PORT(gpio)]);
|
|
if (output)
|
|
u |= 1 << GPIO_BIT(gpio);
|
|
else
|
|
u &= ~(1 << GPIO_BIT(gpio));
|
|
writel(u, &bank->gpio_dir_out[GPIO_PORT(gpio)]);
|
|
}
|
|
|
|
/* set GPIO pin 'gpio' output bit as 0 or 1 as per 'high' */
|
|
static void set_level(unsigned gpio, int high)
|
|
{
|
|
struct gpio_ctlr *ctlr = (struct gpio_ctlr *)NV_PA_GPIO_BASE;
|
|
struct gpio_ctlr_bank *bank = &ctlr->gpio_bank[GPIO_BANK(gpio)];
|
|
u32 u;
|
|
|
|
debug("set_level: port = %d, bit %d == %d\n",
|
|
GPIO_FULLPORT(gpio), GPIO_BIT(gpio), high);
|
|
|
|
u = readl(&bank->gpio_out[GPIO_PORT(gpio)]);
|
|
if (high)
|
|
u |= 1 << GPIO_BIT(gpio);
|
|
else
|
|
u &= ~(1 << GPIO_BIT(gpio));
|
|
writel(u, &bank->gpio_out[GPIO_PORT(gpio)]);
|
|
}
|
|
|
|
/* set GPIO pin 'gpio' as an output, with polarity 'value' */
|
|
int tegra_spl_gpio_direction_output(int gpio, int value)
|
|
{
|
|
/* Configure as a GPIO */
|
|
set_config(gpio, 1);
|
|
|
|
/* Configure GPIO output value. */
|
|
set_level(gpio, value);
|
|
|
|
/* Configure GPIO direction as output. */
|
|
set_direction(gpio, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Generic_GPIO primitives.
|
|
*/
|
|
|
|
static int tegra_gpio_request(struct udevice *dev, unsigned offset,
|
|
const char *label)
|
|
{
|
|
struct tegra_port_info *state = dev_get_priv(dev);
|
|
|
|
/* Configure as a GPIO */
|
|
set_config(state->base_gpio + offset, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* set GPIO pin 'gpio' as an input */
|
|
static int tegra_gpio_direction_input(struct udevice *dev, unsigned offset)
|
|
{
|
|
struct tegra_port_info *state = dev_get_priv(dev);
|
|
|
|
/* Configure GPIO direction as input. */
|
|
set_direction(state->base_gpio + offset, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* set GPIO pin 'gpio' as an output, with polarity 'value' */
|
|
static int tegra_gpio_direction_output(struct udevice *dev, unsigned offset,
|
|
int value)
|
|
{
|
|
struct tegra_port_info *state = dev_get_priv(dev);
|
|
int gpio = state->base_gpio + offset;
|
|
|
|
/* Configure GPIO output value. */
|
|
set_level(gpio, value);
|
|
|
|
/* Configure GPIO direction as output. */
|
|
set_direction(gpio, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* read GPIO IN value of pin 'gpio' */
|
|
static int tegra_gpio_get_value(struct udevice *dev, unsigned offset)
|
|
{
|
|
struct tegra_port_info *state = dev_get_priv(dev);
|
|
int gpio = state->base_gpio + offset;
|
|
int val;
|
|
|
|
debug("%s: pin = %d (port %d:bit %d)\n", __func__,
|
|
gpio, GPIO_FULLPORT(gpio), GPIO_BIT(gpio));
|
|
|
|
val = readl(&state->bank->gpio_in[GPIO_PORT(gpio)]);
|
|
|
|
return (val >> GPIO_BIT(gpio)) & 1;
|
|
}
|
|
|
|
/* write GPIO OUT value to pin 'gpio' */
|
|
static int tegra_gpio_set_value(struct udevice *dev, unsigned offset, int value)
|
|
{
|
|
struct tegra_port_info *state = dev_get_priv(dev);
|
|
int gpio = state->base_gpio + offset;
|
|
|
|
debug("gpio_set_value: pin = %d (port %d:bit %d), value = %d\n",
|
|
gpio, GPIO_FULLPORT(gpio), GPIO_BIT(gpio), value);
|
|
|
|
/* Configure GPIO output value. */
|
|
set_level(gpio, value);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void gpio_config_table(const struct tegra_gpio_config *config, int len)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < len; i++) {
|
|
switch (config[i].init) {
|
|
case TEGRA_GPIO_INIT_IN:
|
|
gpio_direction_input(config[i].gpio);
|
|
break;
|
|
case TEGRA_GPIO_INIT_OUT0:
|
|
gpio_direction_output(config[i].gpio, 0);
|
|
break;
|
|
case TEGRA_GPIO_INIT_OUT1:
|
|
gpio_direction_output(config[i].gpio, 1);
|
|
break;
|
|
}
|
|
set_config(config[i].gpio, 1);
|
|
}
|
|
}
|
|
|
|
static int tegra_gpio_get_function(struct udevice *dev, unsigned offset)
|
|
{
|
|
struct tegra_port_info *state = dev_get_priv(dev);
|
|
int gpio = state->base_gpio + offset;
|
|
|
|
if (!get_config(gpio))
|
|
return GPIOF_FUNC;
|
|
else if (get_direction(gpio))
|
|
return GPIOF_OUTPUT;
|
|
else
|
|
return GPIOF_INPUT;
|
|
}
|
|
|
|
static const struct dm_gpio_ops gpio_tegra_ops = {
|
|
.request = tegra_gpio_request,
|
|
.direction_input = tegra_gpio_direction_input,
|
|
.direction_output = tegra_gpio_direction_output,
|
|
.get_value = tegra_gpio_get_value,
|
|
.set_value = tegra_gpio_set_value,
|
|
.get_function = tegra_gpio_get_function,
|
|
};
|
|
|
|
/**
|
|
* Returns the name of a GPIO port
|
|
*
|
|
* GPIOs are named A, B, C, ..., Z, AA, BB, CC, ...
|
|
*
|
|
* @base_port: Base port number (0, 1..n-1)
|
|
* @return allocated string containing the name
|
|
*/
|
|
static char *gpio_port_name(int base_port)
|
|
{
|
|
char *name, *s;
|
|
|
|
name = malloc(3);
|
|
if (name) {
|
|
s = name;
|
|
*s++ = 'A' + (base_port % 26);
|
|
if (base_port >= 26)
|
|
*s++ = *name;
|
|
*s = '\0';
|
|
}
|
|
|
|
return name;
|
|
}
|
|
|
|
static const struct udevice_id tegra_gpio_ids[] = {
|
|
{ .compatible = "nvidia,tegra30-gpio" },
|
|
{ .compatible = "nvidia,tegra20-gpio" },
|
|
{ }
|
|
};
|
|
|
|
static int gpio_tegra_probe(struct udevice *dev)
|
|
{
|
|
struct gpio_dev_priv *uc_priv = dev->uclass_priv;
|
|
struct tegra_port_info *priv = dev->priv;
|
|
struct tegra_gpio_platdata *plat = dev->platdata;
|
|
|
|
/* Only child devices have ports */
|
|
if (!plat)
|
|
return 0;
|
|
|
|
priv->bank = plat->bank;
|
|
priv->base_gpio = plat->base_gpio;
|
|
|
|
uc_priv->gpio_count = TEGRA_GPIOS_PER_PORT;
|
|
uc_priv->bank_name = plat->port_name;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* We have a top-level GPIO device with no actual GPIOs. It has a child
|
|
* device for each Tegra port.
|
|
*/
|
|
static int gpio_tegra_bind(struct udevice *parent)
|
|
{
|
|
struct tegra_gpio_platdata *plat = parent->platdata;
|
|
struct gpio_ctlr *ctlr;
|
|
int bank_count;
|
|
int bank;
|
|
int ret;
|
|
int len;
|
|
|
|
/* If this is a child device, there is nothing to do here */
|
|
if (plat)
|
|
return 0;
|
|
|
|
/*
|
|
* This driver does not make use of interrupts, other than to figure
|
|
* out the number of GPIO banks
|
|
*/
|
|
if (!fdt_getprop(gd->fdt_blob, parent->of_offset, "interrupts", &len))
|
|
return -EINVAL;
|
|
bank_count = len / 3 / sizeof(u32);
|
|
ctlr = (struct gpio_ctlr *)fdtdec_get_addr(gd->fdt_blob,
|
|
parent->of_offset, "reg");
|
|
for (bank = 0; bank < bank_count; bank++) {
|
|
int port;
|
|
|
|
for (port = 0; port < TEGRA_PORTS_PER_BANK; port++) {
|
|
struct tegra_gpio_platdata *plat;
|
|
struct udevice *dev;
|
|
int base_port;
|
|
|
|
plat = calloc(1, sizeof(*plat));
|
|
if (!plat)
|
|
return -ENOMEM;
|
|
plat->bank = &ctlr->gpio_bank[bank];
|
|
base_port = bank * TEGRA_PORTS_PER_BANK + port;
|
|
plat->base_gpio = TEGRA_GPIOS_PER_PORT * base_port;
|
|
plat->port_name = gpio_port_name(base_port);
|
|
|
|
ret = device_bind(parent, parent->driver,
|
|
plat->port_name, plat, -1, &dev);
|
|
if (ret)
|
|
return ret;
|
|
dev->of_offset = parent->of_offset;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
U_BOOT_DRIVER(gpio_tegra) = {
|
|
.name = "gpio_tegra",
|
|
.id = UCLASS_GPIO,
|
|
.of_match = tegra_gpio_ids,
|
|
.bind = gpio_tegra_bind,
|
|
.probe = gpio_tegra_probe,
|
|
.priv_auto_alloc_size = sizeof(struct tegra_port_info),
|
|
.ops = &gpio_tegra_ops,
|
|
};
|
|
|